Waterjetting Equipment Suppliers

IMS Waterjet, Inc. - Waterbury, CT
Distributor, Manufacturer
Manufacturer of water jetting equipment for cutting composites, foams and textile products. Specifications include 12 in. to 24 in. Z-axis cutting area, rapid traverse moves up to 3,000 in./minute and contouring speed up to 2,500 in./minute. Available with remote PC access supports, reinforced welded steel tanks, sloped bottoms, internal air reservoir and intensifiers. Water jet cutting systems in 2 ft. x 2 ft. to 6 ft. x 6 ft. sizes are also available. Custom sizes available. One year warranty. 24/7 technical support available. Made in USA.
www.imswaterjet.com/WaterJet

General Pipe Cleaners, General Wire Spring Co. - McKees Rocks, PA
Manufacturer, Custom Manufacturer
Manufacturer of high pressure waterjetting equipment. Suitable for cleaning soft stoppages & ice from clogged drain lines. Uses a stream of high pressure water for wall to wall cleaning action. Ranges from 1500 psi/2 gpm electic jets to 3000 psi/8 gpm gas jets to 2500 psi/ 12 gpm trailer jets.
Brand Names: Auto-Cut, Cold-Shot, CopperKey, Drain-Rooter, EasyReach, Flexicore, Flood-Guard, Gen-Ear, Gen-Eye,...
www.drainbrain.com/jets/index.html

Jet Edge - Saint Michael, MN
Distributor, Manufacturer, Custom Manufacturer
Manufacturer of water jet cutters & water jetting & water jet cutting machinery, equipment & systems. Products include high rail gantry waterjet cutting systems, abrasive machining center waterjet cutting systems, mid-rail gantry waterjet cutting systems & automated slitter waterjet slitting systems. Mid-rail gantry systems feature a gantry bridge traveling on a floor-mounted rack & pinion drive system. Automated slitter waterjet slitting systems can be used for cutting materials including paper, fabric, diapers, insulation, webbing, rubber & plastic. Made in the USA.
www.jetedge.com/content.cfm?fuseaction=dsp_...

Gorlitz Sewer & Drain, Inc. - Santa Fe Springs, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer & distributor of waterjetting equipment. Available with working pressures from 1500 psi to 3500 psi & capable of clearing pipes of sizes from 1-1/2 in. to 10 in. dia. Water jetters are electric or gas powered & force water at high pressure rate to clean the pipes.
Brand Names: Gorlitz
www.gorlitz.com/pc_combined_results.asp?pc_...

Aqua Miser B.O.S.S. - North Charleston, SC
Manufacturer
Manufacturer of water jetting equipment. Specifications include 6 GPM at 40,000 psi. Pressure fed abrasive injection.
www.aquamiser.com/

PaR Systems - Shoreview, MN
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom process cleaning tools including precision waterjetting or cutting equipment, machinery & systems for medical devices. Process cleaning tools also include brush & spray cleaning, drying, ultrasonic, coating, deburring & chemical & aqueous bath systems.
www.par.com/product.php?id=37

Sugino Corp. - Itasca, IL
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of waterjetting equipment including high pressure water deburring & cleaning machines. Specifications of deburring & cleaning machines include 6 ft. 7 in. W x 10 ft. 8 in. D x 9 ft. in. H dimension, 5 MPa maximum operating pressure, 45 L/minute maximum flow rate, 19.68 in. x 11.81 in. x 7.87 in. size work piece with 10 kg weight, 354 in. working height, 38 kVA electrical consumption, 30 cycles/hour to 100 cycles/hour cleaning speed, 13 gpm water blasting pressure, contamination level up to 0.01 milligram & 3,500 kg weight.
suginocorp.thomasnet.com/?plpver=10

Waterjetting Equipment Products
	CNC Turret Type High Pressure Cleaning and Deburring Machines Jet Clean Center-U-Jet CNC Submerged Part Washing Machine

NLB Corp. - Locations
Distributor, Manufacturer, Custom Manufacturer
Custom manufacturer & distributor of waterjetting equipment including water jetting systems. Water jetting systems are available in various models & configurations. Specifications of water jetting systems include 8 ft. L x 4 ft. 6 in. W x 5 ft. 4 in. H skid mounting, 14 in. wheels, 110 hp diesel engines, 12 V electric starters, 25 gal. fuel tanks, 20 cfm on-board air compressors, 15 gal. polypropylene tanks & 6 micron absolute water inlet filters. Features include slow running reciprocating pumps, PTO & V belt drives with guards, three plunger positive lubrication & pressure adjusting by-pass valves, oil filled pressure gauges & rupture disc assembly.
www.nlbcorp.com/

Waterjetting Equipment Products
	Ship Bottom Cleaner Shellside Cleaners Abrasive Pipe Cutter More

MAXIEM - Kent, WA
Manufacturer, Service Company
Manufacturer of waterjetting equipment. Available in X-Y cutting travel from 30 in. x 30 in. to 160 in. x 79 in. & foot prints from 72 in. x 66 in. to 202 in. x 112 in. Features include X-Y table motorized with Z-axis, abrasive feed system, Intelli-MAX® software, 20 hp direct drive pump & abrasive nozzle assembly. Used to cut rubber, foam, plastics, glass, ceramics, stone, tiles & metals. Available with 1 year warranty. Made in the USA.
Brand Names: OMAX Jet Machining Center
www.maxiemwaterjets.com/waterjet-cutting/ma...

OMAX Corporation - Kent, WA
Distributor, Manufacturer
Custom manufacturer of programmable abrasive waterjet machining systems including waterjetting equipment available in various models. Specifications of abrasive waterjet machining systems include 72 in. x 116 in. footprint, 3520 lbs. weight, 92 in. height, 7017 lbs. operating weight, 29 in. x 25 in. X-Y cutting area, 46 in. x 31 in. table size, 380 VAC to 480 VAC, 50/60 Hz power supply & noise level below 80 dBA. Features of abrasive waterjet machining systems include stainless steel tanks, slats & slat holders, precision optical locators, water resistant keyboards & mouse, abrasive delivery systems, pre-loaded linear bearings, precision ball screws, water, dirt & grit resistance, mounting points for EDM-style tooling & Windows® XP PC-based controllers. Waterjetting equipment is suitable for cutting metals, aluminum, steel, stainless steel & titanium, glass, composites, ceramic, stone, rubber & wood.
www.omax.com

U.S. Jetting, Inc. - Alpharetta, GA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of waterjetting equipment. Waterjetting equipment are available in various series with specifications including operating pressure ranging from 2,000 psi to 10,000 psi, 6 gal./minute to 36 gal./minute water use, 20 hp to 120 hp engine power, tank capacity ranging from 50 gal. to 600 gal., hose size ranging from 1/2 in. to 3/4 in. & 200 ft. to 500 ft. length. Waterjetting equipment includes cleaning capacity in diameter ranging from 2 in. to 36 in. Waterjetting equipment is suitable for cleaning sewer, drain & pipelines.

Complete Dewatering Pumps & Wellpoints, Inc. - Edgewater, FL
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of waterjetting equipment including pumps. Types of pumps include centrifugal, wellpoint, dewatering, diesel engine driven, high pressure jet, vacuum assisted trash, drainage, electric, suction & transfer pumps. Pumps are available in standard sizes with skid or trailer mounting options. Pumps can be powered by gas, diesel or electric motors.

Accustream Inc. - New Brighton, MN
Manufacturer, Custom Manufacturer
Manufacturer of water jet cutting machinery, equipment & systems including water jet cutters.

Wolfcreek Jetting - Barberton, OH
Manufacturer
Manufacturer of custom water jetting nozzles, high-pressure hose & accessories.

CESCO Aqua Miser Inc. - North Charleston, SC
Distributor, Manufacturer, Custom Manufacturer
Manufacturer of water jetting equipment. 6 GPM at 40,000 psi. Pressure fed abrasive injection.

Tristar Industrial Tools - New York, NY
Manufacturer
Manufacturer of water jetting equipment. Wide variety available include pump RPMs from 600 to 900 RPM.

Aquatech, Hi-Vac Corp. - Marietta, OH
Manufacturer
Manufacturer of water jetting equipment. Waterjetters available as part of a wide variety of products including truck mounted combination waterjetters, high pressure water jets & vacuums, truck & trailer mounts, & specific sewer cleaning & water jetting combo unit. Products available in several dimensions depending on the model & type, with both standard accessories & features, as well as additional options depending on the requirement. Jetters also available as a specifically designed smaller unit for sewer & pipe jobs that require both high pressure water jet cleaning & high powered vacuuming in a tight space.

Bingham Industries - Monroe, WA
Distributor, Manufacturer, Service Company
Specializing in a pressure range between 20,000-40,000 PSI, carries a full line of sapphire & drilled nozzles, UHP hoses, pump parts for most OEM brands, air rotational cleaning tools, UHP water safety valves & variety of other products.

Waterjet Systems International - Joplin, MO
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of water jet / waterjet cutting systems & water jetting equipment including water jet pumps & pneumatic valves. Features include slow intensifier speed - 22 cycles/minute. Slow speed reduces number of pressure spikes in system & number of pressure reversals, patented, ball check valve.

A&V Waterjet Tech, Inc. - Germantown, WI
Manufacturer
Manufacturer of waterjet equipment that includes cutting table, intensifier pump, feeder system, cutting head, and CNC cutting system.

Flow-Tek Corp. - Safety Harbor, FL
Manufacturer, Custom Manufacturer, Service Company
Distributor of industrial cleaning equipment for sewers including water blasting & water jetting equipment. Water blasting equipment capabilities include rotation by water pressure, removable cutting blade to clear severe blockages, drive axle to accommodate towing ring, ability to rotate at variable speeds with flow rates from 10 to 80 gpm & pressures from 50 to 10,000 pounds psi. Manifold nozzle features include defined water stream that turns to mist close to the nozzle. Meets DIN standards.