ThomasNet.com

Aircraft Instruments

Home > Supplier - Product/Service Results: Aircraft Instruments




Provide Feedback

Aircraft Instruments Suppliers

Displaying 1 to 25 out of 67 results
to Compare Suppliers
QED/Inc. - Santa Ana, CA
Manufacturer
ISO 9001:2000 & EN/JISQ/AS9100:2004 certified custom manufacturer of miniature helically wound Bourdon tube aircraft pressure measuring instruments, switches & gage/switch combinations to Mil Spec. Gages are qualified to MIL-G-25867 for humidity, salt fog, fungus, dirt, over-pressure, endurance, seasoning, high & low temperature exposure, temperature-altitude & high & low temperature (negative 65 degrees F to 275 degrees F) & can withstand vibrations up to 90 Grms & shock loads up to 100 gs. Fitting styles available include AN, MS, BSP, SAE & metric. Boeing D1-9000A, FAA & major OEM approved.
TechComm - Sunrise, FL
Manufacturer, Custom Manufacturer
Manufacturer of aircraft instruments such as radio direction finder processors & antennas. Custom designs available. Standard DF antenna models are typically broadband antennas covering frequencies across the communications bands from HF through UHF or approximately 2.0 MHz to 2700 MHz. The most common design is a cavity-backed annular slot that incorporates ferrite elements for the lower HF frequency range.
Instrument Cases LLC - Torrington, CT
Manufacturer, Custom Manufacturer
Manufacturer of aircraft instrument cases. Cases available include MS33639, MS33638, MS3356, MS33549, MS 33548. Cases are manufactured to customer specifications with materials such as aluminum, brass, steel & exotic materials. Case overhaul & repair services are also available.
Palmer Wahl - Asheville, NC
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
ISO 9001:2008 certified manufacturer of aircraft accessories, parts & supplies including instruments, thermometers, temperature analyzers, temperature controls, time/temperature indicators & temperature sensitive labels for continuous overheat monitoring. Available in a wide variety of temperature ranges.
The Vallorbs Jewel Co. - Lancaster, PA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of precision swiss screw machine products for surgical, dental, diagnostic, electromechanical, electromedical, microsurgery & biomedical instruments application.
Capabilities
Kampi Components Co. - Fairless Hills, PA
Distributor
Military specification OEM replacement spare parts. Military specifications fittings, motors, chains, pumps, relays, springs, gages, wire, transducers, filters, instruments, plugs, batteries. Most mil-spec, cage code, AN, MS, NAS, ASME & ASTM specs. Inspection system meets MIL-I-45208. All packaging meets MIL-STD-2073 & MIL-STD-129. MIL-I-45208 & RFID capable.
TORIN Products, Inc. - Columbus, NE
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008, AS9100-B, ISO 13485:2003, ITAR Registered contract manufacturer of a large variety of aerospace, aircraft & military/defense machined components & turned parts. Able to manufacture everything from prototype to Kanban blanket orders, at any volume to the highest quality & tolerance standards. Screw machine product types include: adapters, adjusting nuts, end caps, bodies, bushings, cones, contacts, rings, ferrules, firing pins, header shells, hex nuts, housings, guides, lever pins, locating pins, needle valves, ports, pistons, pivot pins, plugs, brobes, retainers, retaining rings, rod actuators, rollers, screw housings, shafts, sleeves, sliders, spacers, spring pins, stems, studs, terminals, valve bodies & washers. Secondary capabilities include centerless grinding & cylindrical grinding, CNC & conventional milling, thread rolling, drilling, chuckers, honing & assembly. Tight tolerance capabilities include: +/-.0002 on lengths. Capable of diameters up to 1 5/8 in. & lengths of 5 in. Materials machined include: aluminum, brass, bronze, beryllium copper, Greek ascoloy, hastelloy, inconel, titanium, kovar, 303, 304, 316, 347, 416, 420, 440, 17-4 PH stainless steels. SPC data can be furnished on customer request.
Acrylic Art, Inc. - Emeryville, CA
Custom Manufacturer, Service Company
Custom manufacturer of instruments for aircraft, electronic and laboratory applications. Various materials include acrylic, acetal, ABS, polycarbonate, polyester, polyethylene, brass, aluminum, stainless steel, polysulfone and polypropylene. Capabilities include machining parts up to 20 in. L x 40 in. W x 14 in. H sizes, fabrication, boring, contouring, counterboring, countersinking, milling, facing, pocketing, profiling, reaming, turning, prototyping, assembly, decorating, drilling, engineering, engraving, finishing, lathe work, metalizing, product development, slitting, stress relieving, surface treatment, tapping, welding, blanking, blending, cutting, gluing, hardware insertion, painting, anodizing, routing, bonding, vapor polishing, screen printing, vinyl lettering and precision cleaning. Rush and emergency services available. ISO compliant. On-time delivery.
Capabilities
Powermag, Inc. - Newbury Park, CA
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of aircraft engine instruments for fixed & rotor wing multi-engine aircrafts. Aircraft instruments include tachometers, N1, N2, EGT & fuel flow. Microprocessor controlled instruments feature 3 pointers, fuel usage display, digital read-outs, & LCD & LED displays. Capacities include the ability for fuel flow instruments to communicate together when used in multi-engine aircraft. Total fuel used, rate of flow & fuel remaining can be displayed.
Oxigraf, Inc. - Mountain View, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001 & EN46001/Annex 2 certified manufacturer of instruments including oxygen analyzers for analytical, aeronautical, aircraft & automotive research applications. Oxygen analyzers are available in various models with specifications including measurement range up to 100 percent, -10 degrees C to plus 50 degrees C operating temperature, -20 degrees C to plus 60 degrees C storage temperature, -10 degrees C to plus 50 degrees C gas inlet temperature, 70 kPa to 115 kPa cell pressure, 5 minutes warm-up time for full accuracy, non-condensing humidity up to 95 percent, plus /-0.2 percent & plus /-0.5 percent accuracy, plus /-0.1 percent & plus /-0.03 percent short term stability, plus /-0.2 percent cross sensitivity, 0.6 VDC & 2.5 A sensor power supply, 4 mA to 20 mA analog output, 95 VAC to 250 VAC input voltage & 47 Hz to 63 Hz external power supply. Features include laser diode oxygen sensor, gas sampling pump, pressure sensor, flow controller, LED display, touch panel controls for alarm, flow & calibration functions, keypads & analog & digital RS-232 outputs. Oxygen analyzers are available with regulators, valves, batteries & carrying case. FDA approved.
Aircraft Instruments Product Catalog:
Aerospace Oxygen Analyzers
New Avionics Corp. - Fort Lauderdale, FL
Manufacturer, Custom Manufacturer
Manufacturer of remote sensing optical ice transducer probe: sensitivity 0.0001 inch; weight 1/4 oz; diameter 1/4 inch; lenght 1.5; no moving parts, radio silent; standarizes known icing conditions & add value to host avionics.
Wicks Aircraft Supply - Highland, IL
Distributor, Manufacturer
Stocking distributor of instruments for aircraft applications. Products include accelerometers, indicators, altimeters, inclinometers, tachometers, voltmeters, gauges, clocks, ammeters, shunts & engine monitors.
Brand Names: Falcon
DACO Instrument Co. - Milford, CT
Manufacturer
Manufacturer of aircraft instrumentation including indicators & desiccators. Designed, engineered & precision built specifically to meet the exacting demands of aerospace & ground support instruments.
ADS/Transicoil Corp. - Collegeville, PA
Manufacturer, Custom Manufacturer
Manufacturer of instrumentation, displays, components & subassemblies designed for use in aircraft applications. Aircraft & aerospace instruments include discrete indicators in many formats to monitor engine or secondary parameters. Features include analog pointer/dial, digital LCD or a combination on one face & cylindrical or rectangular packages. These instruments are electro-mechanical/servo-driven, microprocessor-based or a combination of both.
Honeywell International Inc. - Morristown, NJ
Manufacturer, Custom Manufacturer
Manufacturer Of Aerospace & Automotive Parts, Chemicals, Fibers
Islip Transformer & Metal Co., Inc. - Hauppauge, NY
Manufacturer, Custom Manufacturer
Radar signal threat indicators for avionic, aerospace, aircraft applications in military & defense electronics (EW). Radar detectors & radar systems, circuit card & cable assemblies & harness electronic assemblies.
Moog Components Group - Blacksburg, VA
Manufacturer, Custom Manufacturer
Mfr & designer of aircraft navigation & engine instrumentation, LCD engine instrumentation & custom military display systems. Products include panel-mounted, internally lighted horizontal situation indicators, horizontal situation indicator systems, LED engine indicators, digital bearing distance indicators & radio magnetic indicators. Several of these products are designed specifically for rotary-wing & high performance fixed-wing aircraft.
Aerosonic Corp. - Clearwater, FL
Manufacturer
Manufacturer Of Aircraft Equipment, Parts & Supplies
Strube, Inc - Marietta, PA
Distributor, Manufacturer, Service Company
Manufacturer of aircraft instruments, parts & supplies; maintenance service
Rogerson Kratos - Pasadena, CA
Manufacturer, Service Company
Aircraft Instrument Systems
Aircraft Instrument Specialists, Inc. - Bedford, OH
Manufacturer, Service Company
Meter Instruments For Aircraft Simulation
API Nanotronics Corp. - Hauppauge, NY
Manufacturer, Custom Manufacturer
QPL manufacturer of electronic & critical components for global defense, military & commercial sectors. Vibration aircraft & aerospace instruments & monitors.
Cobham Mission Systems - Davenport, IA
Manufacturer
Aircraft Instruments, Life Support Equipment, Oxygen/Nitrogen Generators
Guide Technology Inc. - Sunnyvale, CA
Manufacturer
Manufacturer Of Test & Measurement Equipment Semiconductor ATE
Metro Aircraft Instruments - Waterford, MI
Distributor, Manufacturer, Service Company
Instrument repair, overhaul & exchange requirement services & parts for modern corporate jets, light general aviation aircrafts, heavy cargo aircrafts & older aircrafts.
to Compare Suppliers
Back to top
© 2012 Thomas Publishing Company. All rights reserved. See Terms and Conditions or Privacy Statement. Website Last Modified February 13, 2012.
print screen
Sign Up | Log In | Product News | Promote Your Business