Adsorbents & Desiccants Corporation of America (ADCOA) - Gardena, CA
Distributor, Manufacturer, Custom Manufacturer
Manufacturer & distributor of refrigerated air & atmospheric dryers. Products also include activated alumina, activated charcoal, activated carbon, silica gel & molecular sieves. Additional products include bulk & bagged activated clay, deliquescent tablets, dessicated breather vents, bagged dessicants for pharmaceutical, industrial & military (MIL-D-3464) applications & class 100 clean room foodstuff compatible dessicants. Engineering, custom prototypes, custom designs, custom packaging & private labeling are also available.
catalog.adcoa.net/item/dehydrators-dryers/d...

Terra Universal, Inc. - Fullerton, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of desiccator drying cabinets in many sizes & materials, with nitrogen-purge & regenerating desiccant controls systems & options for ESD safety, heating/cooling, datalogging & HEPA filtration.
www.terrauniversal.com/wet-processing-stati...

The Grieve Corp. - Round Lake, IL
Manufacturer, Custom Manufacturer
Custom manufacturer of walk-in ovens including high temperature air switch dryers for hazardous atmospheric applications. Dryers are available in various models with specifications including 48 in. x 48 in. x 72 in. to 72 in. x 120 in. x 72 in. dimensions, 71 in. x 90 in. x 88 in. to 115 in. x 176 in. x 84 in. outside dimensions, 96 cu.ft. to 360 cu.ft. volume, 850 degrees F to 1,200 degrees F temperature, 4,200 cfm to 17,500 cfm blower capacity, 3 hp to 15 hp motor, 7 in. to 10 in. insulation, 60 kW to 120 kW heat input & plus/minus 0.3 percent control accuracy. Dryers also available with temperature controller, pilot lights, purge timers, shutoff valves, gasket seals, doors, latches & UL listed control panels.
www.grievecorp.com/Index.htm

Buflovak, LLC - Buffalo, NY
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of atmospheric dryers with single heated drums. Dryers are available in 60 in. x 192 in. sizes with 251 sq. ft. drying surface. Various features include single & multi layer application, satellite applicator rolls, mechanical support skids, liquid or paste feed & adjustable knives, roller bearings, hollow-bore gear drives, fully automatic drum & roll gap controls & crew conveyor options.
www.buflovak.com/VacuumThermal/Products/Sin...

James Dawson Enterprises (USA), Inc. - Plattsburgh, NY
Distributor
Distributor of drying agents including atmospheric dryers for laboratory applications. Dryers include bags, canisters, packets, inserts, tablets, disks & plugs. Dryers are used to protect products from the damaging effect of moisture. Dryers are suitable for industrial, electronics & pharmaceutical applications. Pharmaceutical dryers are FDA approved for contact with food & drugs.
packagingmaterial.jamesdawson.com/category/...

The Witte Co., Inc. - Washington, NJ
Manufacturer, Custom Manufacturer
Design & manufacturer of dryers including atmospheric dryers, chemical dryers, closed cycle dryers, continuous dryers & convection dryers & related process equipment including autowires, air distribution systems, wedge wire decks, food equipment, plastic equipment, sludge handling equipment, pharmaceutical processors including aseptic, hygienic system designs offering stainless steel machinery which meets FDA regulations for cleanroom operations.
www.witte.com/products/fbdryer.php

Sterling - New Berlin, WI
Distributor, Manufacturer
Manufacturer and distributor of temperature control equipment, material handling systems for processing operations, steam control products, automation equipment, water treatment/filtration systems, recycling equipment, and related products & components. Chillers, coolers, cooling towers, dryers, blenders, mixers, conveyors, feeders, hopper, feeders, pumps, tanks, shredders, separators, valves, traps, robotics, and descaling equipment are also available.
www.sterlco.com/index.cfm/datakey/3/categor...

AEC, Inc. - Schaumburg, IL
Manufacturer, Service Company
Manufacturer of dryers, feeders, blenders, mixers, hoppers, chillers, coolers, filters, temperature control (heat & cool) equipment, industrial cooling equipment, and pump tank equipment and systems for industries including plastics, chemical processing, pharmaceutical, paper, film, foil, and rubber processors.
aec-material-handling.aecinternet.com/

Munters Corporation - Dehumidification Division - Amesbury, MA
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified custom manufacturer of atmospheric dryers including dehumidifiers. Types of dehumidifiers include condensation, corrosion prevention, desiccant, dry storage, investment casting, moisture control, mold & fungus control & wastewater dehumidifiers. Dehumidifiers are available in various models with 50 cfm to 100,000 cfm air flow volumes. Dehumidifiers are suitable for industrial & commercial applications.
www.munters.us/en/us/Products--Services/

Specific Systems - Locations
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom environmental air-conditioning, heating, ventilating & pressurization systems. Products include HVAC systems, explosion proof HVAC air conditioners, chillers, air handlers, equipment coolers, chemical filtration systems, HVAC unit housings & components. Other products such as chemical filter boxes, filtration media, gas alarms, cabinets, coils, control panels, fans/blowers, filters, heaters, crankcase heaters, stack packages, airflow measuring stations, economizers, humidistats & programmable thermostats are also available. Types of HVAC systems include industrial/petroleum, commercial/light industrial, portable & units designed to Military Spec. HVAC systems. Design engineering, fabrication & installation services are available. Markets served include petrochemical, telecommunications, military, government & industrial. Products are UL® listed & CSA® certified. Products meet ASME, ASTM & NFPA standards.

Perry Videx, LLC - Hainesport, NJ
Distributor
Worldwide distributor of used atmospheric tray dryers. Atmospheric tray dryers are available with features including drying chamber, twin sections with hinged doors, stainless steel rollers on base, & air circulation/ventilation system.
www.perryvidex.com/perry/machinery.nsf/prod...

Procedyne Corp - New Brunswick, NJ
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard and custom fluid bed atmospheric dryers. Available with 1,200 degrees C operating bed temperature.
catalog.procedyne.com/item/powder-processin...

Red-Ray Mfg. Co., Inc. - Branchburg, NJ
Manufacturer
Manufacturer of atmospheric infrared burners or dryers for thermoplastic striping equipment. Non-electric atmospheric infrared burners are available in 7 in. x 3.625 in. sizes with 700 btu/hour/linear in. or 190 btu/hour/sq. in. heat output, 1/2 in. to 1 in. inspirator outlet & 1/8 in. to 1/4 in. inspiration gas connection. Features include cast iron & corrosion resistant nickel plated construction, stainless steel internal components & hold down rails, ceramic refractory grids, propane or natural gas fuel source & reverberatory screens. Atmospheric burners can be used in premix systems to increase heat output up to 1,000 btu/hour/linear in.

ENCON Evaporators - Hooksett, NH
Manufacturer, Custom Manufacturer
Custom manufacturer of evaporators including non-thermal type atmospheric dryers for use in plating & wastewater applications. Dryers are available in various models & configurations including 2 in. & 4 in, ceramic fiber insulation, 42 in. D x 64 in. H dimension, up to 23 in. x 35 in. drum dimension, 200 gal. to 400 gal. evaporation rate, 5 in. stack dimension, 120 cfm at 70 degrees F temperature volumetric air flow & 220 V to 480 V power supply. Features include hinged lids & side walls, heating elements, disposing residue, temperature controllers, thermocouples, drum dollies with casters & stack connectors. Materials include 316 & 316L type stainless steel & Hastelloy¿.
www.evaporator.com/index.php?page=drum-drye...

Process Equipment Solutions - Louisville, KY
Manufacturers' Rep, Service Company
Mfr's. rep. of industrial dryers including atmospheric dryers. Available as gas fired conveyor dryers. Features include energy efficient 300,000 BTU burner, single speed recirculation air system, fresh air combustion blower, analog belt speed control, digital temperature control, high resolution gas modulating valve & manual-reset high temperature limit switch. Gas fired conveyor dryers are available in natural gas & propane models. Gas fired conveyor dryers meet UL-795 standard. Emergency telephone support service available.
Brand Names: Hix
www.pesllconline.com/solutions/equipment/

Bry-Air, Inc. - Sunbury, OH
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified custom manufacturer of dryers including atmospheric dryers, batch dryers, continuous dryers, desicant dryers, process dryers, & parts dryers. VFB dehumidifier, desiccant cassettes, plastic resin drying products including large capacity dryers of 600 to 7,500 lbs./hr, mold dehumidification systems of 300 to 30,000 CFM. Dryers that deliver minus 40 degrees dew point are available with gas-fired reactivation. Optional heat recovery coils provided.
www.bry-air.com/product-drying.html

Doyle Dryers, Inc. - Sapulpa, OK
Custom Manufacturer
Distributor of adsorbents & desiccants including alumina gel & activated alumina suitable for compressed air dryers. Alumina has high crush strength & will not disintegrate when hit with free water. Activated alumina is available in 55 lb. bags, 55 gal. steel drums & 28 x 48 mesh packages of 1/8 in., 3/16 in. & 1/4 in. beads. Steel drums are available with open head cover & locking ring. Other adsorbents include activated carbon, molecular sieves, silica & silica gel. Industries served include oil exploration, petroleum refining, gas processing, utilities, chemical, automotive, aircraft, steel mills & paper mills.
www.doyledryers.com/dpequip.html

Comairco - Locations
Distributor, Service Company
Distributor of dryers. Types of dryers include refrigerated & regenerative or desiccant compressed air dryers. Compressed air dryers are available in air flow ratings up to 6000 CFM. Types of refrigerated dryers include cycling, non-cycling, energy saving, high-volume, high-capacity, high inlet temperature & high pressure refrigerated dryers. Desiccant compressed air dryers such as heatless, external heat reactivated, blower purge heat reactivated & high pressure desiccant dryers are available. 24x7 on-site services are available.
www.comairco.com/compressed_air_dryer_hanki...

The Dryco Group - Downers Grove, IL
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer & distributor of mechanical & desiccant dehumidifiers including air, gas & atmospheric dryers. Specifications of dehumidifiers depending upon models include 300 cfm to 25,000 cfm air flow, 15 tons to 60 tons capacity & 1,900 lbs. to 11,500 lbs. weight. Dehumidifiers are available with filters, generators, microprocessor controllers, blowers, ducts, heaters & silica gel rotors. Used dehumidifiers are also available.

Kathabar Dehumidification Systems, Inc. - Buffalo, NY
Manufacturer
Manufacturer of air dehydrators & dryers including absorptive, air, gas, atmospheric, batch, chemical & continuous. Used in pharmaceutical processing plants & food processing plants. Removes 94% of all bacteria, viruses & molds from the air streams, both supply & exhaust.

Lectrodryer - Richmond, KY
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified manufacturer of standard & custom drying & purification equipment & systems including atmospheric gas dryers. Process gases include hydrogen, nitrogen, helium, oxygen, freon & inert gases. Features include designed for drying atmospheric & cylinder gases, resists moisture from process gases, dual tower, solid adsorption, heat reactivated design & closed circuit system. Capabilities include designing, in-house engineering, fabricating & assembling. Services include inspection & maintenance field services for annual, semi-annual & quarterly period time. Products meet ASME, ANSI, NEMA & NEC standards.

The Bethlehem Corporation - Easton, PA
Manufacturer, Custom Manufacturer, Service Company
Custom Design & Fabrication Of Process Equipment Including Dryers, Dewatering Filters, Heat Transfer Equipment

Wyssmont Inc. - Fort Lee, NJ
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of solvent recovery equipment including atmospheric inert gas dryers for closed cycle systems. Features of dryers include inlet baffles, wipers, circular trays, levelers, heaters, inlet manifolds & fans.
Brand Names: Turbo-Dryer, Wyssmont

Xericweb - Neenah, WI
Manufacturer
Manufacturer of electric infrared heaters & atmospheric, convection & infrared dryers for printing & coatings.

Air Repair, LLC - Clarksburg, WV
Distributor, Service Company
Distributor of cold regenerated desiccant dryers including miniature air & atmospheric dryers. Available with 80 psi to 225 psi pressure & 3 cfm to 5,000 cfm flow rate.
Brand Names: BOGE