ThomasNet.com

Aeration & Agitation Blowers

Home > Supplier Discovery > Supplier Results for Aeration & Agitation Blowers




Provide Feedback

Aeration & Agitation Blowers Suppliers

Displaying 1 to 25 out of 69 results
to Compare Suppliers or Email
Advertisement
Advertisement
Advertisement
Aerzen USA Turbo Division - Coatesville, PA
Manufacturer
Manufacturer of centrifugal, turbo blowers operating up to 600 HP, 11,000 cfm, 22 PSIG. Single-stage, high-speed, radial turbo blowers are designed to meet varying flow & pressure requirements in many different processes. Primary application is waste water treatment with volume flow control in conjunction with a dissolved oxygen (DO) probe. Turbo blowers are frequency controlled, gearless driven machines with lubricant-free aerodynamic bearings. Compact, factory tested, & ready- to-install units. High frequency permanent magnet motor specifically designed for high frequency applications; it steadily maintains its high efficiency over a wide range of operating speeds & loads. The turbo blower shaft rests on air foil bearings & the high frequency drive concept does not make use of any speed increasing gears. There is no need for oil lubrication, therefore no risk of leakage or disposal problems.
www.aerzenusa.com/Products/Turbo-Blowers
Air Power Products Limited - Cambridge, ON Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer
ISO 9001:2008 registered custom manufacturer & distributor of regenerative blowers including agitation & aeration blowers. Specifications of blowers include 108 VAC to 600 VAC power supply, 0.44 A to 36.4 A maximum current at 60 Hz frequency, 0.28 kW to 8.6 kW rated power, 36 in. wc to 180 in. wc maximum pressure & 34 in. wc to 140 in. wc maximum vacuum. Features include suction gripping, air knife blowoff & air tables & frames. Blowers are suitable for pneumatic conveying, powder/granular fluidizing & waste water treatment applications. Stock items are also available.
Brand Names: H & S Machinery
air-power-products.airpowerproducts.com/cat...
Continental Blower, LLC - East Syracuse, NY
Manufacturer, Custom Manufacturer
Manufacturer of cast iron, cast aluminum, vertically split, multistage centrifugal blowers & exhausters for air & gas handling. Includes acid resistant, agitation, aeration, air, axial flow, belt driven, blast, centrifugal, cooling, corrosion resistant, direct drive, electric, electronic, fan, filtered, flotation, forge, furnace, gas, grain, hazardous, heating, low noise, marine, material handling, mining, motor driven, pneumatic, pressure, radial wheel, regenerative, rotary, & water cooled blowers. Blowers are driven by 3600 rpm electric motors, variable speed electric motors, V-belt arrangements, steam turbines, gear boxes, & gas engines. Also includes parallel & series pipe options & inlet butterfly valve & variable speed drive regulations.
www.continentalblower.com/superior_design_f...
MSC Industrial Supply Co. - Melville, NY
Distributor, Custom Manufacturer
Supplier of 450,000 products from 2,500 mfrs.: cutting/machine/hand/power tools, MRO supplies, abrasives, fasteners, precision instruments, machinery, electrical supplies, safety equipment, HVAC, welding, hose, tubing, fittings, material handling, pumps, power transmission, janitorial; same day shipping
www.mscdirect.com
Evoqua Water Technologies - Alpharetta, GA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of agitation and aeration blowers including diffused air systems and mechanical aeration systems for municipal and industrial wastewater treatment and sludge aeration applications. Diffuser types include fine and coarse bubble membrane, ceramic, plastic with membrane, stainless steel with membrane, and stainless steel and ceramic for corrosive applications. Aeration types include fine and coarse bubble, jet, and various forms of surface and submerged systems. Full technical support for diffuser design and selection available.
www.evoqua.com/en/products/Pages/default.as...
Exair Corporation - Cincinnati, OH
Distributor, Manufacturer, Custom Manufacturer
Manufacturer of compressed air powered air amplifier blowers to vent welding smoke, cool hot parts, dry wet parts, clean machined parts, distribute heat in molds & ovens, ventilate confined areas & exhaust tank fumes. Types include high temperature, stainless steel & aluminum adjustable air amplifiers & super air amplifiers. Air amplification ratio up to 25:1, air volume at outlet up to 3000 scfm & air volume at 6 in. away up to 9000 scfm. Patented design for high flows & low noise levels. Air amplifiers are available with mounting flanges. OSHA & CE compliant. Air amplifiers are available with 5 year warranty.
www.exair.com/93/sal.htm?source=Thomas
AMETEK Precision Motion Control (formerly AMETEK TIP) - Kent, OH
Manufacturer, Custom Manufacturer
Custom manufacturer of agitation & aeration blowers. Type of blowers includes electroplating blowers. Specifications include diameter ranging from 1/2 in. to 8 in., pressure ranging from 2 scfm to 4200 scfm, slot placement up to 45 degree angle & air knife placement ranging from 1/2 in. to 3 in. with velocity from 3 in. to 6 in. Applications include business machine, chemical processing, environmental, fuel cell, industrial, instrumentation, medical, pump/compressors, textile & machine transportation. RoHS compliant.
Brand Names: Ametek, DurA-Tek, IntelliGen, Microjammer, MiniSpiral, Minijammer, Multiflow, Nautilair,...
www.ametektip.com/index.php?option=com_cata...
Nol-Tec Systems, Inc. - Lino Lakes, MN
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of blower packages including agitation & aeration blowers & air blowers. Features include heavy duty structural base, adjustable motor rails, inlet filters, V-belt drives, enclosed belt guards with detachable front, flexible connections, relief valves, silencers, check valve assembly, silencer support mounts & pressure & vacuum gages. Optional features include sanitary base, stainless steel construction, sound enclosures, temperature switches, vibration isolators & inlet filters.
www.nol-tec.com/documents/pdfs/NT_M258.pdf
Cyclonaire Corp. - York, NE
Manufacturer, Service Company
Manufacturer of pneumatic conveying components & parts including agitation & aeration blowers. Industries served include manufacturing, energy, railroad, government, automation, utilities, transportation, cement/concrete & environment. 24 hour customer service available.
Brand Names: Cyclonaire
www.cyclonaire.com/products/parts
Kerr Pump & Supply Co. - Oak Park, MI Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer
Distributor of pressure and vacuum blowers including positive displacement, regenerative and centrifugal. Blower types available include acid resistant, agitation & aeration, belt driven, gas, grain, material handling, and vaneaxial. Positive displacement blowers are available in rotary and heavy duty high pressure industrial models. Regenerative blowers are available in medium pressure or high pressure models.
Brand Names: Atlantic Blowers, Busch, Elektror, Fuji Electric, M-D Pneumatics, Solberg, Tuthill, Vortron
pumps.kerrpump.com/category/pressure-and-va...
Tuthill Vacuum & Blower Systems - Springfield, MO
Manufacturer, Service Company
Manufacturer of blowers for agitation & aeration. Features include mounting base with integral silencer, flow range 6 - 2300 CFM, pressure range to 15 PSIG & vacuum range to 16 in. mercury. Applications includes compost aeration, vacuum cleaning, agitation of dense powders & dust collection. ISO 9001:2000 registered.
Brand Names: Atlantic Fluids, Competitor, Equalizer, M-D Pneumatics, PD Plus, Pneumax, Qube, Qx
tuthill.rtrk.com/?scid=1083168&rl_alt=http%...
Aerzen USA Corp. - Coatesville, PA Browse our catalog of productsCAD Drawings
Manufacturer, Custom Manufacturer
Manufacturer of positive displacement blowers for water treatment agitation & aeration, oil-free air & gas, bulk solids pneumatic conveying. The roots blower type design are highly developed machines designed & adapted for a broad range of applications including the pneumatic conveying of bulk materials, pressurized aeration of basins in water treatment plants, filter flushing blowers in drinking water production plants, gas boosting blowers rated for internal static pressures of up to 25 bar, steel production, applications in direct-reduction plants. Conveying of practically all gases found in the chemical, petrochemical, & metallurgical industries. Special designs are available to handle aggressive gases. Machines used in both conventional & nuclear power plants comply with the various categories of safety regulations. Machine sizes range from small PD blowers installed in tank vehicles to very large ones used in pneumatic elevators for vacuum operated ship unloaders. ISO 14001:2004 certified.
www.aerzenusa.com
The Stutz Co. - Chicago, IL Browse our catalog of products
Distributor, Manufacturer
ISO 9001:2000 certified. Manufacturer & distributor of blowers for aeration & air agitation on nickel & acid copper plating. Belt driven, corrosion resistant, exhaust or ventilating, fiberglass reinforced plastic (FRP) & regenerative blowers are also available.
Brand Names: Stutz
www.stutzcompany.com/supply-list.html#b
Aerzen USA Pneumatic Conveying Division - Coatesville, PA
Manufacturer
Manufacturer of positive displacement blowers for oil-free pneumatic conveying of air, gas, bulk materials, and solids. Roots type blowers designed for a broad range of applications. Available with suction pressure for vacuum pumps. Sizes range from small blowers installed in tank vehicles to large used in pneumatic elevators. Also used for pressurized aeration of basins in sewage treatment plants, filter flushing, gas boosting, steel production, cement conveying, food applications and nuclear power plants. Conveying of gases found in the chemical, petrochemical, and metallurgical industries. ISO 9001.
www.aerzenusa.com/Products/Positive-Displac...
New York Blower Company - Willowbrook, IL
Manufacturer, Custom Manufacturer
Manufacturer of agitation & aeration blowers. The aeration of process fluids use the same bubblers as used in aquariums. Aqua culture requires aeration of ponds to increase the density of fish, shrimp and plants in commercial food production. Aeration systems are used in both industrial & municipal waste-water treatment to remove VOC's & organics by supplying the BOD (biochemical oxygen demand) necessary to oxidize these compounds. In some applications with lower bed depths, fans can be used to aerate the ponds. In other applications where odors are a problem, fans are used with exhaust hoods to control the foul air by creating a vacuum at the emission and forcing it through an odor control system or incinerator. Design features include FRP construction special alloy, construction corrosion resistant coatings & high pressure capability (to 130" SP) available materials of construction: FRP SST alloys mild steel.
www.nyb.com/aeration.asp
C & W Manufacturing - Alvarado, TX Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer
Manufacturer of standard and custom agitation & aeration blowers. Specifications include 3 hp and 5 hp power, 2,020 rpm and 3,020 rpm speed and 90 cfm and 140 cfm flow rate. Available with couplings, check and spring style relief valves and inlet filter silencers. Made in USA.
dustcollector.cwmfg.com/viewitems/pneumatic...
Stephens Mfg. Co., Inc. - Tompkinsville, KY Browse our catalog of products
Manufacturer
Manufacturer of 4.5 hp agitation & aeration blowers. Optional 5 hp magnetic starters, wire in liquid tight metallic flex conduits, controls & manifolds are available. Made in USA.
stephensmfg.thomasnet.com/viewitems/silo-an...
EcReCon, Inc. - Penns Grove, NJ
Distributor
Distributor of used & surplus blowers including agitation, aeration & pneumatic conveying roots blowers. Products also include belt driven blowers, rotary drive blowers, rotary positive blowers, centrifugal type blowers, general housing blowers, rotary lobe blowers, exhaust fan blowers, fiber glass blowers & fiber glass fume exhauster's. Buy & sell surplus equipment.
www.ecrecon.com/inventory.php?cat=16&view_a...
Air Compressor Works - Riviera Beach, FL Browse our catalog of products
Distributor, Custom Manufacturer, Service Company
Stocking distributor of agitation & aeration blowers. Specifications of blowers include flow rate up to 4,400 cfm, 15 psig maximum pressure, vacuum performance up to 15 in. Hg. & noise reduction up to 20 dB. Features include rotary positive displacement, housings, cast iron endplates, rotor assemblies, ventilated sound enclosures & lockable doors.
Brand Names: Arrow Air, Curtis-Toledo, Gardner Denver, Ingersoll-Rand, Kaeser, MTA, Mobilair, Omega, Omega,...
aircompressorworks.thomasnet.com/category/b...
Westmoor Ltd., Industrial Div. - Sherrill, NY
Manufacturer
Custom manufacturer of rotary vane aeration & agitation blowers. Applications of blowers include use in the liquid waste & grease trap cleaning, pond & lake aeration & dairy industry. Blowers are available with a 1 year warranty.
www.westmoorltd.com/vacuum-nc.htm
Eurus Blower, Inc. - Wheaton, IL
Manufacturer
Manufacturer of agitation & aeration positive displacement blowers used in waste water & power generation applications. Types of positive displacement blowers include bi-lobe & tri-lobe blowers. Features include integral-shaft ductile iron impellors, over-sized cylindrical roller bearings, low vibration, piston ring air seals & lip type Viton® oil seals. Blowers have working pressures to 15 psig & vacuum to 15 in. Hg. Blowers are available with 24 months warranty from date of shipping or 18 months warranty after date of installation.
www.eurusblower.com/index.php
KB Systems, Inc. - Bangor, PA
Distributor, Manufacturer, Custom Manufacturer
Manufacturer & distributor of standard & custom centrifugal blowers for agitation & aeration applications. Centrifugal blowers are available with fluidizing system. Centrifugal blowers feature welded steel mounting frame & intake silencer/filter assembly. Centrifugal blowers are available with piping, brackets, flex-connections & installation hardware. Made in the USA.
www.kbsystemsinc.com/bulk-handling-equipmen...
CustomAire - Livingston, NJ
Distributor, Manufacturer
Manufacturers, distributors & designers of air moving products blowers, fans, ventilators-industrial commercial OEM/custom heavy duty & corrosive resistant, PVC & FRP blower components, parts & accessories. Wheels, propellers, & housings also available.
FPZ, Inc. - Saukville, WI
Distributor, Manufacturer
Manufacturer, distributor & designer of agitation/aeration blowers, regenerative blowers, explosion proof and environmental blowers & flow converting devices. Blowers feature all aluminum construction, oil-less operation. Models in single/two stage designs. Capabilities over 1500 Scfm. ISO 9000:2000 accredited.
www.fpz.com
Diffused Gas Technologies, Inc. - Lebanon, OH
Manufacturer
Manufacturer of blowers for aeration and gas diffusion applications. Available with fiberglass reinforced plastic and weather resistant enclosures. Blowers with CFM rates ranging from 22-320 CFM are available with motor drives.
www.diffusedgas.com/page8.html
to Compare Suppliers or Email
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified July 24, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen