ThomasNet.com

Industrial Coating Services

Home > Supplier Discovery > Supplier Results for Industrial Coating Services

Apply Qualifications

Search Within # Miles
Show companies within
miles of:
Search Within Results




Provide Feedback
to Compare Suppliers or Email
Matrix Coatings, Inc. - West Palm Beach, FL
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 9001: 2000 applicator of industrial coatings to solve the most difficult problem. Coatings such as PTFE, Tefzel®, Halar®, Emralon®, Xylan®, Ryton®, epoxy & polyesters applied to SSPC & NACE standards increase bond strength & impact resistance to the maximum level obtainable.
www.matrixcoatings.net/index.html
American Japanning, Inc. - Cleveland, OH Browse our capabilities profile
Custom Manufacturer, Service Company
Industrial coating services. Coatings include Kynar® 500 / Hylar® 5000 painting, epoxies, polyurethanes, acrylics, alkyds, lacquers, urethane enamels, dry film lubricants & other specialty coatings & conform to a specification or a stated performance requirement. Special packaging, labeling, stenciling & part marking & small or large quantities are also available.
www.americanjapanning.com/industrial-coatin...
AmTech Tank Lining - Plymouth, NH
Manufacturer, Custom Manufacturer, Service Company
External/internal corrosion resistant industrial coating services are available for steel/concrete potable water tanks, steel/concrete/wood tanks, municipal and industrial waste water tanks, fuel tanks, oil tanks, chemical tanks and above ground atmospheric storage tanks.
www.armorshieldlining.com/
Conformance Coatings & Prototype - Marysville, MI
Custom Manufacturer, Service Company
Industrial coating services. Specializing in painting various plastic components and pretreated metal. Able to work with preapproved paint sources, customer approved paint or assisting in paint selection based on specifications and working environment. ISO 9001:2008 certified and meet EPA standards.
www.ccproto.com/plastic_coating.html
Boyd Coatings Research Co., Inc. - Hudson, MA
Manufacturer, Service Company
Manufacturer of paints & coatings for industrial, commercial, & architectural requirements. Coating services include surface preparation, priming & top coating, maintenance finishes, medical device coating, & custom coatings to custom specification. Also includes CRC™ fluoropolymers, PTFE & Xylan® coating, & antenna protection against rain, ice, dirt, & ultraviolet radiation. Available in a wide range of colors.
Brand Names: DuPont
www.boydcoatings.com/html/capabilities.html
National Coating Corp. - Rockland, MA Browse our capabilities profile
Custom Manufacturer
ISO 9001:2008 certified custom water/solvent based coating services for electronics, marine & industrial applications. Coating can be done on foam, carbon fabric, Kraft paper, gasket materials, friction media, non-wovens (wet & air laid), cotton, paper & glass mat. Coating can be done on substrate widths up to 80 in. & weights from 1 oz./sq. yd. up to 60 oz./sq. yd. Capabilities include slitting, sheeting, piece processing, saturation & tenter frame drying. TURA compliant.
www.natcoat.com/about.html
Thelamco, Inc. - Benton Harbor, MI
Manufacturer, Custom Manufacturer, Service Company
Laminating & coating services from 1/2 mil. to 60 mil. thickness for medical, automotive, electronic, food & industrial applications. Materials include paper, paperboard, tissue, metallized film, foils, foam, fabric, scrim, non-woven materials & rolled paper pulp. Capabilities include tack, removable & repositionable release, scuff & tear resistance, light blocking, food grade, dissipative & adhesives coating, slitting, packaging, warehousing, high velocity drying & in-line curing. Meets EPA standards. JIT delivery.
thelamco.rtrk.com/?scid=2324216&rl_alt=http...
Valmont Coatings, a Division of Valmont Industries (VMI) - Locations
Custom Manufacturer
Industrial coating services including hot-dip and spin galvanizing, liquid, electro-deposition, and powder coating and color, graphic, marble, and fade anodizing. Silk screening, pad printing, sanding, straight lining, masking, assembly and supply chain management also available.
www.valmont.com/valmont/products/hot-dip-ga...
SRT Solutions - Houston, TX Browse our catalog of products
Manufacturer, Service Company
Industrial coating services available for midstream oil & gas, power generation, downstream oil & gas and other industrial plants. Other services available include storage tank repair, secondary containment, pipe repair and reinforcement, composite wrap repairs, flare line wrap, concrete crack injection and restoration, abrasive blasting services and sponge jet blasting.
www.srtsolutions.us/
Metallic Bonds - Beloit, WI
Distributor, Manufacturer, Custom Manufacturer, Service Company
Industrial coating services. Carbide, ceramics, stainless steel, molybdenum, aluminum, bronze, copper and other materials worked. Coatings are resistant to abrasion, erosion, wear, cavitations and brinelling. Suitable for pump shafts, mechanical seals and grinder spindles. 24 hour services available. On-time delivery.
www.metallicbonds.com/
Industrial Hard Carbon - Denver, NC
Custom Manufacturer
Custom finishing manufacturer. Industrial coating services available. Coatings withstand temperatures ranging from -200 degrees C to +600 degrees C and withstand tensile/compressive stresses greater than 46,000 psi. Properties of hard carbon thin film coatings include electrical insulation, thermal conductivity, lubricity, wear resistance & corrosion resistance and are composed of nano-crystalline diamond & nano-crystalline silicon carbide.
www.industrialhardcarbon.com/
Top Gun Powder Coating, LLC - Jasper, GA Browse our capabilities profile
Custom Manufacturer, Service Company
ISO 9001: 2008 certified coating facility. Industrial specialty coating services include liquid and powder coating services. AAMA 2603, 2604 and 2605 architectural grade coatings, primers, clear coat, epoxy, urethane, polyesters, thermoplastic, hybrids, fusion bonding and acrylics are available for powder coating. Liquid coatings include architectural (fluoropolymer), primers, epoxy, urethane, polyurethane, high solids, NSF 61, non-skids, military (CARC), industrial marine, enamel and acrylics. Low to high production volume runs are available. Industries served include aerospace, architectural, transportation, decorative, marine and military. Emergency services are available.
www.topgunpowdercoating.com/index.html
Mechanical Jobbers - Lithonia, GA
Custom Manufacturer, Service Company
Coating services including industrial & specialty coating. Coating services are used for protective & decorative finishes. Other services such as surface preparation & cleaning, blasting, repair/maintenance, infrastructure rehabilitation, flooring, plating, polishing, anodizing & engraving are also available.
www.mechanicaljobbers.com/services/
TRANS-ACC - Cincinnati, OH Browse our capabilities profile
Custom Manufacturer, Service Company
Industrial metal coating services. Coatings include CARC (chemical agent resistant coatings), wet coatings, dip & spray powder coatings, dry film lubricants, plastisols, high performance finishes & EMI coatings. Methods of application include conventional air spray, electrostatic, air assisted, airless high volume, low pressure, dip coat, dip spin & baking. Finishes include textured, wrinkled, smooth & non-skid surfaces. Capabilities to finish parts from small components to large fabrications. Short runs, packaging & delivery services are available.
services.trans-acc.com/category/all-categor...
Applied Powder & Coatings, Inc. - Boothwyn, PA
Custom Manufacturer, Service Company
Industrial powder coatings services including media blasting & pre-treating featuring vinyl, plastisol, epoxy, TGIC, polyurethane, polyester, hybrids, nylon & high temperature coatings. Application methods include electrostatic spray, tribo spray, flocking, fluid bed, plastisol dipping & dip molding. Other services include light assembly & machining, color matching, specialty masking, prototypes, packaging, special process on castings, coatings over coatings, blasting, coating removal, mil-spec adherence, USDA & FDA approved. Applicable for the oil, chemical, fabrication, telecommunications, electronics & textile industries.
www.appliedpowdercoatings.com/coatresist.ht...
Trojan Powder Coating Co., Inc. - Locations
Manufacturer, Custom Manufacturer, Service Company
Complete powder coating service for architectural metal products, aluminum & steel. Many colors & finishes, including matte, glossy, semi-gloss, textures, wrinkles, wood tones, marble, brick, etc. Assembly, packaging & trucking available.
Brand Names: AKZO Nobel, Decoral, DuPont, IFS, Kynar, PPG, ProTech, Rohm & Haas, SPRAYLAT, Sherwin-Williams,...
www.trojanpowder.com/capabilities/index.htm...
Intercoastal Paint Co. - Houston, TX
Manufacturer, Service Company
Manufacturer of industrial coatings for metal building, ornamental iron trade & industrial entities. Coatings include enamels, epoxies, primers, thinners & VOC compliant high-solids & water-based primers. Coatings are available in 1 gal., 5 gal. & 55 gal. containers or 330 gal. tote tanks & various colors including white, yellow, blue, red, brown, orange, green & gray. Finishes & topcoats are also available.
Kettle Moraine Coatings, Inc. - Jackson, WI
Manufacturer, Service Company
Coating services featuring three types of coating techniques. Electrostatic powder, fluid bed powder & hot dip plastisol coating.
www.kettlemorainecoatings.com
Techmetals, Inc. - Dayton, OH
Manufacturer, Custom Manufacturer, Service Company
Nadcap, ISO, AS, ITAR, NSF, ATF/FFL accredited coating company with large automatics & very large part production lines: applicator & developer of engineered metal alloy & conversion coatings for: corrosion resistant metal alloy coatings, ir, hard chrome replacement, anti-wear, thin film coatings, id coatings, anti galling, optical, thermal coatings, release, hard, slick, dry lubrication, grip, low coefficient of friction, anti bacterial, self lubricating, shielding, department of energy, packaging, pulp & paper, oil, alternative energy, agriculture, transportation, material handling, coal, nuclear & forestry. Also anodizes hard chrome, pvd, plating on plastics, electroless nickel, nickel boron, diamond coatings, ceramic alloys, silver, chemfilm, zinc, zinc nickel, hardcoat, ti-anodize, tin, gold, cobalt, tungsten, passivate, and electrolytic nickel phos.
www.techmetals.com/Default.aspx
Imagineering Finishing Technologies - South Bend, IN Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
AS 9001, ISO 14001:2004 NADCAP certified. Experts in the application of electroless nickel plating, EN/PTFE, zinc & manganese phosphate coatings, passivation, Mil-Spec & specialty painting, dry film lubricants, non-destructive testing for a variety of industries & applications.
iftworldwide.rtrk.com/?scid=1890957&rl_alt=...
Purtech, Inc. - East Stroudsburg, PA Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
Industrial coating services including R&D, production & field application of HVOF, plasma, wire arc, & fusion bonded coatings of metal, ceramic & carbide materials. Coating capabilities include automated & multi-axis machines for production parts including flats, irregulars & OD's to 72 in. & ID's as small as 3 in. In-house finishing capabilities include CNC machining, diamond grinding, superfinishing & lapping services. Field service capabilities include portability of all coating processes, as well as gun & part articulating equipment. Industries served includes military/government, aerospace, automotive, power, refinery, material handling, waste treatment, pulp & paper, printing & steel industry.
purtech.com/category.php?id=therm
Electroplate-Rite Corp. - Dublin, VA Browse our capabilities profile
Custom Manufacturer, Service Company
ISO 9000 certified & ISO 9001:2000 certified coating services, coating consulting & inspection services. Services include abrasion resistant coating services & industrial coating services. Types include electroplating, anodizing, zinc plating & rack chrome line. Applications include coating of car, gun & antique silver plating. RoHS compliant.
electroplateritecorp.thomasnet.com/category...
Magnetic Component Engineering, Inc. - Torrance, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 & AS 9100 Rev C certified industrial coating services for standard & custom magnets, magnetic components & magnet assemblies. Magnets & magnetic components are coated with materials including nickel, ion vapor deposited aluminum, phenolic resins, FDA approved phenolic resins, epoxy & metal undercoats with epoxy overcoats. Standard parts coated include blocks, discs, rings & round bars in different dimensional specifications. Services also include assembly, testing magnetic materials BH curves, engineering design, magnetizing, marking, identification, stabilization, calibration, testing & certification. Markets served include aerospace/defense, medical, industrial, research labs, semi-conductor & telecommunications.
www.mceproducts.com/Products_Services/Servi...
Peters' Heat Treating, Inc. - Meadville, PA Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified industrial black oxide coating services. Other services include heat treating, annealing, induction annealing, vacuum annealing, conventional hardening, case hardening, vacuum hardening, atmosphere hardening, induction hardening, nitriding, gas nitriding, carburizing, ferritic nitro carburizing, vacuum aging, vacuum solution treating, cryogenic treating, shot blasting & vibratory deburring & polishing. Metallurgical services & consulting services are also available.
www.petersheattreat.com/services.html
Universal Enterprises, Inc. - Shinnston, WV Browse our catalog of products
Manufacturer, Custom Manufacturer, Service Company
Coating services for industrial applications. Industrial applications include coal processing facilities, material handling systems, cones, bins, hoppers, and storage tanks. Materials worked with are aluminum, stainless steels, carbon steels, nickel steel alloys, and Inconel®. Other capabilities are rolling, CNC drilling, drafting and detailing services, threading, welding (FCAW, SAW, SMAW, and GMAW), bending, CNC cutting, angle shearing, punching, and forming. Painting and blasting services are also offered. Delivery services are available.
universalfab.com/index.cfm
to Compare Suppliers or Email
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified August 20, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen