Hot Tapping & Line Stopping Contractors

Home > Supplier Discovery > Supplier Results for Hot Tapping & Line Stopping Contractors

Provide Feedback

Hot Tapping & Line Stopping Contractors Suppliers

Displaying 1 to 25 out of 31 results
to Compare Suppliers or Email
Topaz, Inc. - Houston, TX
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
Hot tapping & line stopping contractors also cold cutting services in applications ranging from high pressure transmission pipeline, to low pressure HVAC systems. Specialized equipment is operated by technicians under the pipeline contractor supervision. Also offer a line of piping products including weld-on & mechanical tapping & plugging fittings, pipe repair clamps & mechanical couplings, full encirclement pipe saddles, expansion joints, pipeline pigs, pressure test plugs, gas main bags, pipeline insulators, & casing end seals.
Koppl Pipeline Services, Inc. - Montebello, CA
Manufacturer, Custom Manufacturer, Service Company
Hot tapping & line stopping contractors. Hot tapping services are available with pressure up to 1,440 psig at 100 degrees temperature. Line stopping services are available with pressure up to 900 psi. Capabilities include pipe freezing and valve insertion. Suitable for water, wastewater, plumbing and industrial applications. 24/7 emergency and repair services available.
InfraTech Solutions - Houston, TX
Custom Manufacturer, Service Company
Hot tapping & line stopping contractors. Capabilities include pipe and infrastructure repairing, industrial, high pressure and robotic pipe cleaning, pipeline pigging, CCTV piping inspection, water jetting, hydroblasting, pipe lining and cured in place pipe installation.
Furmanite - Charlotte, NC
Distributor, Manufacturer, Custom Manufacturer, Service Company
Hot tapping and line stopping contractors for industrial, pipeline, water, and waste water applications. Provides thermowell hot tap installations, angle hot taps, subsea hot tapping, containment wall tapping, and storage tank taps. Capable of tapping 1/2" to 72" pipe size, up to 2800 psig pressure capacity, and up to 1200 degrees F temperature capacity. Other services available are on-line leak sealing and repair, line plugging, on-site machining, heat treatment, on-site technical bolting, pipe freezing, valve repair, composite pipe repair, concrete repair and restoration, NDT and inspection, line isolation, and hydrostatic weld/nozzle testing.
Rapid Pump & Meter/ Machinery Services Corp . - Paterson, NJ Browse our catalog of products
Distributor, Custom Manufacturer, Service Company
Contractors for industrial machining processes including hot tapping & line stopping. Services include building, rebuilding, repairs, preventative maintenance, start-up, installation, troubleshooting, turnkey services, emergency response, electronic field services, flow surveys & analysis, vibration analysis, alignment, meter & instrumentation calibration, pipe fitting, dynamic balancing, welding, fabricating, motor rewinding, auto CAD design assistance, backhoe & excavation, product demonstration & training. Markets served include municipal, industrial & institutional water & wastewater management industries.
Tapco Water Corp. - Wellston, OK
Service Company
Hot tapping services for all in. to 24 in. wet connect needs.
EA Services - Vancouver, WA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Nevada Tap Master, Inc. - Las Vegas, NV
Service Company
Company offers a full staff of technicians, welders & fully equipped trucks with cranes.
Pro Tapping, Inc. - Medford, NJ
Service Company
Full range of tapping services including line stopping & line plugging. Line stopping or plugging is a means of stopping flow & providing a temporary shutoff where none exists, while your system is running live & under working pressure. This serves as a control, or temporary shut-off, that can be removed after all modifications have been completed. This process can be used to isolate piping systems or sections for repairs, alterations or relocations without shutting the entire system down. Line stops services performed on carbon steel, galvanized steel, stainless steel, copper, brass, cast iron, ductile iron, transite/ACP, PVC, concrete cylinder pipe & additional pipeline materials per customer request. Line stopping is performed from 3/4 in. to 36 in. on lines with a working pressure up to 1,000 psi & up to 400 degrees F. Line stops can be performed with optional bypass hot or wet taps from 3/4 in. to 36 in. on lines with a working pressure up to 1000 psi & up to 400 degrees F.
Tap Master, Inc. - Concord, CA
Service Company
Hot tapping & line stopping contractors. Hot tap services are available from 1/4 in. to 42 in. Line stop services can be done for product sizes from 3/4 in. to 42 in.
Flow Serve - Charlotte, NC
Custom Manufacturer, Service Company
Line stopping hot tapping contracting service Fittings, pipe & clamp repair.
F T Industrial Specialists, LLC - Manchester, NH
Service Company
Hot tapping and line stopping contractors. Capabilities include the repair/prevention of water, air steam and most chemical leaks, band clamp, repack valves, wire wrap of a flange or bonnet, stock clamps or enclosure repair.
Everett J, Prescott Inc. - Middleton, MA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Distributor of water, sewer, drain & gas products, including pipes & pumps, tubing, meters & flow meters, valves & controllers, hydrants, vacuum & pressure testers, locators, leak detectors & back-flow preventers, reading systems, sensors, tapping sleeves, fittings, clamps, couplings, compression connections & corporations, saddles, hangers, manholes, plugs, tools, fences, first aid kits, safety clothing, applicators, flashlights, traffic cones, guards, tapes, sealants & accessories. Custom manufacturers of flanged, grooved & wall pipes.
Everett J. Prescott, Inc. - Gardiner, ME
Distributor, Manufacturer, Custom Manufacturer, Service Company
Hot tapping & line stopping contracting services for pipelines ranging from 3/4 in to 16 in. Capabilities include installing tapping sleeves, tapping valves & tapping machines on ductile iron & cast iron, PVC & asbestos-cement pipes under pressure without interrupting water service & removal of tapping machines, leaving a mechanical joint connection ready for pipe connection.
J. Moore & Co. - Livingston, NJ
Custom Manufacturer, Service Company
Mechanical, plumbing, HVAC, piping service
Arizona Tap Master, Inc. - Glendale, AZ
Service Company
Hot tapping (hot taps), wet tapping (wet taps), dry tapping (dry taps), line stopping (line stops), line bypass service, pipe freezing (pipe freezes), leak sealing, gas line installation, butt fusion, electro fusion, pipe pinching, welding, thermowell installation, flow meters, valve insertion, specialty fittings & general pipe repair.
EA Services - Benicia, CA
Distributor, Custom Manufacturer
2Lbin Inc. - Murrieta, CA
Hot tapping & line stopping contractors. Service provider of: hot tapping, line stopping, pipe freezing, thermo-well installation, valve inserting services, resin based leakseal pipe repair services & products.
Easy Tapper LLC - Arvada, CO
Manufacturer of standard & custom tapping machinery & specialty tools & components. Types of tapping machinery include manual, pneumatic, hydraulic & spindle feed tapping machinery. Specialty tools including ozone generators, in-line filters, thermowell installation tools, oil adding cylinders, fume hoods & tapping saddles. Tapping machinery can be used for hot or wet branch line & pipeline installations. Specialty products are suitable for mechanical trade industries. Cutters, adapters, pilot bits & tapping machinery replacement parts are also available. One year warranty.
International Flow Technologies - Murrieta, CA
Service Company
Capable of handling modifications to most piping systems. Specialize in replacing & adding new valves to existing systems without interruption of service & wet tapping of butterfly valves. Hot tapping 1/2 in. - 60 in. OD pipeline. Line stopping: 1/2 in. - 72 in. OD pipeline. Pipe freezing: 1/2 in. to 36 in. OD pipeline. Insert valves: 6 in. , 8 in. , 10 in. & 12 in. OD pipeline.
American Piping Services, Inc. - Las Vegas, NV
Service Company
Contractors specializing in hot tapping up to 60", line stopping to 42", pipe freezing to 24". Valve insertion 4"-12".
EA Services - Frankfort, IL
Distributor, Custom Manufacturer
Distributor of coaitngs.
Colorado Tap Master - Longmont, CO
Service Company
Hot tapping & line stopping contractors specializing in pipe freezing, leak sealing, valve insertion, leak repair, thermowell service, pipe pigging, line bypassing, butte fusion, electro fusion, welding, specialty fittings, and 24/7 emergency service.
Todd H. Thomas - Wauseon, OH
Service Company
Water tapping services. Water line taps on PVC, concrete, ductile iron, gray iron, waterlines & force mains. All sizes ranging from 3/4 in. to 20 in. taps. Also repair water hydrants.
EA Services - Carson, CA
Distributor, Custom Manufacturer
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified September 1, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen