ThomasNet.com

Direct-Fired Heaters

Home > Supplier - Product/Service Results: Direct-Fired Heaters




Provide Feedback

Direct-Fired Heaters Suppliers

Displaying 1 to 25 out of 167 results
to Compare Suppliers
Sigma Thermal - Marietta, GA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom direct-fired heaters. API & non-API direct fired heaters in capacities from 1 MM btu/hr to 80 MM btu/hr are available. Types of heaters include direct fired convection heaters & radiant convection heaters. Direct fired convection heaters feature row by row sizing methods & standard/engineered burner configurations. Applications include natural gas heating, crude oil heating, regeneration gas heating, in-line liquid heating, in-line gas heating & thermal oil heating.
Cambridge Engineering, Inc. - Chesterfield, MO
Manufacturer
Manufacturer of energy efficient direct gas-fired space heating & make-up air heating equipment for warehouses, storage areas, manufacturing plants, aircraft hangers, automobile service areas, construction heater & many other commercial & industrial applications.
Brand Names: Blow-Thru
Absolute Equipment - Pittsburgh, PA
Distributor, Service Company
Distributor of new & used heaters including ground heaters. Heater rental services are also available for ground thawing & concrete curing, towable, kerosene, natural gas, propane & 240V electric heaters. Heaters are available with 400000 btu to 15000000 btu heating capacity.
WATTCO - Hallandale, FL
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom direct fired air duct heaters including open coil, tubular or finned tubular heaters for high temperature applications. Specifications include 1/4 in. ID thermowell, 3 1/2 in. thick insulation, 16 ga. thick satin coated steel construction & 277/600 VAC, 25/10 A non-inductive primary linear cutout & secondary linear cutout. Features include stainless steel supports, wiring coolers, terminal enclosures, single & three-phase tensions & corrosion & oxidation resistance. Applications include heat treating, air drying, air pre-heating, fan coils, multizone reheating & annealing. CSA & UL approved.
Brand Names: Wattco
Corbett Industries, Inc. - Waldwick, NJ
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of industrial process heating & manufacturing equipment including direct fired heaters, electric heaters, gas heaters & hot air heaters. Facilities include design, sales, manufacturing, renovation, installation service & component part sales. Products include ovens, dryers, furnaces & kilns, process fume incinerators, heat recuperation systems, combustion chambers, process air heaters, packaged control systems, textile calender roll heating systems & pre-drying equipment for web applications.
Hubbell Electric Heater Co. - Stratford, CT
Manufacturer
ISO 9001:2000 certified manufacturer of indirect & direct-fired water heaters made from welded carbon steel. Specifications of heaters include 80 gal. to 5,000 gal. storage capacity, 28 in. to 88 in. vertical dia., 50 in. L x 28 in. W x 34 in. H to 178 in. L x 94 in. W x 100 in. H horizontal dimension, 24 in. dia. x 46 in. L to 90 in. dia. x 196 in. L storage tank, 1.5 in. to 3 in. NPT inlet outlet size, 5/8 in. thick hydrastone cement internal tank surface, 125 psi working pressure & 2 in. thick fiberglass blanket insulation cover. Meets ASME standards.
Brand Names: Hubbell
TEMP-AIR, Inc. - Locations
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer & rental service provider of temporary, portable heating equipment including direct fired heaters. Direct-fired heaters are available with caster & skid bases, electronic modulating burner controls, remote thermostats, centrifugal blowers & multiple fuel options including natural gas, propane, hot water & steam. Suitable for controlling moisture & contaminant levels for construction finishing & various other applications. Other rental services include air conditioners, spot coolers, chillers, air handlers, fans, dehumidifiers & air filtration units. 24 hour service available nationwide.
Brand Names: Frost Fighter, Ground Heaters, L. B. White, TEMP-AIR, TEMP-HEAT, Wacker
Heat Exchange & Transfer, Inc. - Carnegie, PA
Manufacturer, Custom Manufacturer
Custom manufacturer of direct gas fired thermal fluid heaters for heating oil & water. Heaters are available with features including pre-piped skids with foamglass insulation, safety & temperature controls & operating temperature up to 750 degrees F. Capabilities of heaters include heating capacity from 400,000 to 20 mm btu/hr. Heaters are available in vertical & horizontal configurations including helical, nested & staggered coil designs. Meets ASME standards.
Product Catalog
Berner International Corp. - Air Curtains/Air Doors - New Castle, PA
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of direct-fired heaters for plant, warehouse & factory applications. Specifications of direct-fired heaters include 1 1/2 hp & 2 hp motors, 1,750 rpm fan speed, 6,500 cfm & 7,900 cfm air flow & 5 in. to 8 in. inlet gas pressure. Direct-fired heaters are available with ignition & control transformers, interrupted pilots, lock & vent valves, gas pressure switches, magnetic starters, limit switches & rear inlet guards.
Brand Names: Berner
ComEnCo Systems, Inc. - Berkeley, CA
Custom Manufacturer, Service Company
Custom manufacturer of direct & indirect fired air heaters. Suitable for heating re-circulation air for automotive paint curing ovens. NFPA, FM, CSA, UL, CE & AGA compliant.
Mobile Air Inc. - Locations
Distributor, Service Company
Rental services for direct-fired heaters used in offices & computer & server rooms. Specifications of direct-fired heaters include 400,000 btu/hour to 4,000,000 btu/hour capacity, 2,000 cfm to 16,000 cfm flowrate, 120 V to 480 V voltage, 15 A to 30 A current, 1 1/4 in. NPT maximum gas connection size, 95 lbs. to 570 lbs. weight & 22 in. x 44 in. x 6.5 in. to 73 in. x 41 in. x 44 in. dimension. New & used equipment also available.
American Heating Co., Inc. - Clifton, NJ
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of direct-fired heaters. Available in 0.6 mm btu/hour to 200 mm btu/hour capacity & three phase, 60 hp, 460 V power supply. Various features include coils, safety controls, burners, circulating systems, switches, lights, interlocks, motor starters, inlets & outlets, internal insulation & controllers. Direct-fired heaters are suitable for biodiesel plants & storage terminals, roofing plants, chemical & petrochemical plants & oil storage terminals.
Thermal Fluid Systems - Kennesaw, GA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom water heaters including direct fired, electric water, hot air, gas fired & indirect heaters. Features include 3 pass flue gas arrangement & cylindrical coils. Fluid temperature ranges from 20 degrees F to 100 degrees F between the inlet & outlet heaters. Also available fuel, gas, oil or waste fuel fired thermal fluid heaters & heating systems with with capacities ranging from 500000 btu/ hr. to to 50 million btu/hr & electric hot oil heaters with power ratings from 10 kW to over 5 mW.
Brand Names: Konus
Product Catalog
Ameritemp Ltd. - Johnsburg, IL
Distributor, Service Company
Distributor of direct-fired heaters. Direct-fired heaters are available in models with heat outputs of 500,000 Btu/h & 1,000,000 Btu/h. Depending on model, specifications include 5.7 gal./hr LPG, 5 therms/hr NG or 10.73 gal./hr LPG, 10 therms/hr NG maximum gas consumption, 4600 CFM or 5250 CFM & 42 in. x 20 in. x 30 in. & 48 in. x 22 in. x 33 in. dimensions. Features include cold rolled steel construction coated with 2 stage enamel paint, 100 percent stainless steel ring type burner with electronic ignition & large
Direct-Fired Heaters Product Catalog:
Portable Forced Air Heaters
Ameri-Temp Heater Models AT500 & AT1000
Parker Boiler Co. - Los Angeles, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of direct-fired & thermal fluid or thermal liquid heaters. Specifications of heaters include 126,000 btu to 6,250,000 btu capacity, 1 5/16 in. OD steel tube, 0.133 in. header thickness & 350 degrees F to 650 degrees F temperature. Heaters are available with burners, steel frames, headers & bent tubes. Heaters are suitable for chemical plants, plastic molding, asphalt, oil & adhesive heating, laundry & food processing applications.
Solaronics, Inc. - Rochester, MI
Manufacturer, Custom Manufacturer
Manufacturer of direct-fired heaters: gas-fired high intensity infrared heaters & DOORJET gas-fired door heaters for industrial & commercial use.
Carrier Rental Systems - Farmington, CT
Service Company
Rental services for heaters. Specifications of heaters include size ranging from 15 kW to 360 kW. Applications include comfort heating, construction site heating, moisture removal, temporary heating system & climate control.
SC Fastening Systems - Oakwood Village, OH
Distributor, Service Company
Distributor of direct-fired heaters. Other products include OEM hardware & industrial supplies. Industries served include mechanical contractors, sheet metal fabricators, HVAC companies, dunnage rack manufacturers & truck body manufacturers.
Direct-Fired Heaters Product Catalog:
Portable Diesel Direct-Fired Heater - HeatStar
Lincoln Associates - Marietta, GA
Manufacturers' Rep
Manufacturers rep. of of heating, ventilation, air conditioning & refrigeration equipment for industrial & commercial applications.
Direct-Fired Heaters Product Catalog:
Applied Air Direct Fired Systems
Abell Combustion, Inc. - Kimberton, PA
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
Manufacturers rep & stocking distributor of heat treating equipment & heat processing equipment including air & direct-fired heaters. Direct-fired heaters include automatic door switch, 1MM BTUH, natural gas or propane, 8,000 CFM, 110V/l/60 power requirements. Other products include make-up air units, air rotation units, door heaters, construction heaters.
Glenro, Inc. - Paterson, NJ
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom heaters including direct fired, oil fired, preheating oil & electric preheating oil heaters. Electric infrared heaters emit infrared heat at medium & long wavelengths. Electric heaters are available with power output at 4800 W per sq. ft. at temperatures up to 1500 degree F. Gas infrared heaters are available with temperature ratings up to 1600 degree F & 56,000 BTU per sq. ft. of radiant surface.
Trane - California District - City of Industry, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of make-up air direct-fired heaters for floor mount or ceiling suspension. Available with 1,600 cfm to 64,000 cfm nominal airflow & 275 Mbh to 7975 Mbh gas input. Heaters are available in horizontal & vertical configurations with horizontal or top or down flow discharge. Heaters are piped, wired & waterproofed.
Brand Names: Trane
Hurst Boiler & Welding Co., Inc. - Coolidge, GA
Manufacturer, Custom Manufacturer, Service Company
Recuperative thermal oxidizers heats gases to the point of oxidation, then discharges them through a heat recovery system. Produces a full range of steam producing air-vapor oxidizing thermal oxidizers where heat recovery is accomplished by the generation of steam, using a single-pass boiler, sized for efficiency. The thermal oxidizer (direct-fired air heater) eliminates problems with waste gases & vapor steams that have odors, voc's & other noxious properties.
S.K. Bowling/Paint Perfect - Wilson, NC
Distributor, Manufacturer, Custom Manufacturer
Custom manufacturer of direct-fired & make-up air heaters for paint spray booth applications. Heating systems are designed for a wide range of operations including spray mode at 70 degrees & curing at temperature of 160 degrees. Burners can raise outside temperatures 140 degrees. Outside & inside installation options are available. ETL listed. Made in USA.
Multitherm LLC - Malvern, PA
Manufacturer, Custom Manufacturer
Custom manufacturer & distributor of direct-fired heaters including heat exchangers. Heat exchangers are available with 3/4 in. to 1 1/4 in. OD tubes, 4 in. to 20 in. shell sizes, 3 to 165 number of U-tubes & 15/16 in. to 1 9/16 in. triangular pitches. Features include threaded or flanged shell side connections inlets & outlets, carbon steel, brass or stainless steel baffles, carbon steel, stainless steel & naval brass tube sheet, shells, rear heads, gaskets & U tube bundles. Heat exchangers are made from copper tubes, cupro-nickel, carbon steel, stainless steel & admiralty brass.
Brand Names: MultiTherm, MultiTherm IG-1, MultiTherm OG-1, MultiTherm PSC Plus
to Compare Suppliers
Back to top
© 2012 Thomas Publishing Company. All rights reserved. See Terms and Conditions or Privacy Statement. Website Last Modified June 4, 2012.
print screen
Sign Up | Log In | Product News | Promote Your Business