ThomasNet.com

Component Assembly With Fluid Dispensing Dispensers

Home > Supplier Discovery > Supplier Results for Component Assembly With Fluid Dispensing Dispensers




Provide Feedback

Component Assembly With Fluid Dispensing Dispensers Suppliers

Displaying 1 to 11 out of 11 results
to Compare Suppliers or Email
Advertisement
Advertisement
Advertisement
Designetics - Holland, OH
Manufacturer, Custom Manufacturer, Service Company
Manufacturer & designers of component assembly with fluid dispensing dispensers. Complete line of dispensers include fluid dispensers, hand-held flow dispensers, air-actuated flow dispensers & bottle dispensers. Dispensers are compatible with flat, round, wraparound, channel, brush & specialty applicators. Bottle dispensers have 3.625 in. to 7.750 in. height, 1.250 in. to 2.420 in. dia. & 2 oz. to 16 oz. capacity. Hand-held & automatic flow dispensers feature stainless steel construction, flow levelers, adjustment screw, 1/8 in. NPT fluid port, packing attainer, 1/16 in. NPT plug, needle tip, lock nut & positive pneumatic on & off. Dispensers are used for fluid application & flow actuation.
Brand Names: Designetics
thomasnet26.rtrk.com/?scid=2219682&rl_alt=h...
Nordson EFD - East Providence, RI
Manufacturer
Manufacturer of component assembly with fluid dispensing dispensers. Products include high pressure tools, dispensing pens, dispensing robots & dispensing tools. High pressure tool dispenser tips with dia. 0.004 in. are available. Dispensing pens can dispense consistent fluid deposits in dia. of 0.007 in. Dispensing robots are available with 325 mm x 325 mm or 525 mm x 525 mm work envelopes. Bench top centrifuge, solder reflow & vacuum pickup are available.
Brand Names: MicroMark, Mikros
www.nordson.com/en-us/divisions/efd/product...
Assembly & Automation Technology, Inc. - Woburn, MA
Custom Manufacturer, Service Company
Custom manufacturer of component assembly with fluid dispensing dispensers. Fluids dispensed include adhesives, seals, lubricants, coating, insulation & a variety of other fluids. Fluid dispensing systems can be pre-programmed for multiple part styles & sizes with a panel view to adjust adhesive dispensing position, pattern & volume. Industries served range from automotive, manufacturing & packaging to electronics, appliance & medical.
www.assemblyandautomationtech.com/fluiddisp...
Dopag - Monroe, NC
Manufacturer
Manufacturer & distributor of dispensers including component assemblies for fluid dispensing. Products include pump systems, electronic metering & mixing systems, meter mix supply units, spray painting & coating systems & hot melt & cold glue adhesive systems. Manual & automated systems available. Materials handled include low, medium & high viscosity fluid materials including epoxies, urethanes, polysulfide, silicones, adhesives, sealants & coatings. Products used for encapsulating, potting, bonding, sealing, molding, filling & coating applications.
Nordson ASYMTEK - Carlsbad, CA
Manufacturer, Custom Manufacturer
ISO 9001:2008 certified manufacturer of component assembly with fluid dispensing adhesive dispensers. Systems feature digital vision system for high-speed fiducial capture, light beacon w/audible alarm, low pressure sensor, programmable fluid & valve pressure, tactile height sensor, ventilation exhaust system, controlled process heat for recipe-controlled heat management, programmable fluid & vale pressure control for closed-loop processing, & option to configure with single or dual lanes & one, two or three heat stations. Component assembly with fluid dispensing adhesive dispenser system placement accuracy is X-Y plus/minus 0.050 mm, 3 Sigma & Z accuracy of plus/minus 0.025 mm, 3 Sigma. Applications include underfill for flip, chip & chip scale packaging, chip encapsulation, dam & fill, thermal compounds, dual lane configuration, UV gaskets for LCDs, rapid heater system, laser height sensor & exterior bulk fluid reservoir. SEMI-S2, SEMI-S8, SMEMA, CE compliant.
Brand Names: Asymtek, Spectrum
Kirkco Corp. - Monroe, NC
Distributor, Manufacturer, Custom Manufacturer
Manufacturer & distributor of dispensers including component assemblies for fluid dispensing. Products include pump systems, electronic metering & mixing systems, meter mix supply units, spray painting & coating systems & hot melt & cold glue adhesive systems. Manual & automated systems available. Materials handled include low, medium & high viscosity fluid materials including epoxies, urethanes, polysulfide, silicones, adhesives, sealants & coatings. Products used for encapsulating, potting, bonding, sealing, molding, filling & coating applications.
ProMech Engineering - Taylors Falls, MN
Manufacturer, Custom Manufacturer, Service Company
Custom & special automation equipment & systems services including special projects for manufacturing process development, problem solving, cost reduction, quality improvement, product design & development. Services include coil winding, custom gauging, custom fixturing, glass working, laser soldering & trimming & metal stamping & forming. Specializing in assembly engineering & process development.
SciLog, Inc - Madison, WI
Manufacturer
Manufacturer of automated liquid dispensing, handling, metering & purification equipment/systems for process development, lab pilot plant & small scale manufacturing. Documented calculations automatically generated populate tables/graphs meeting GLP, GMP requirements. Applications including filtration/purification, metering, dispensing/filling/diluting/weight ratio, chromatography & sample preparation. Products including protein purification systems, monitoring pumps, programmable aseptic liquid/solvent dispensing systems by volume or weight, metering products to control mass-flow of nutrients into bioreactors & fermenters, pH & titration control, & chromatography systems.
New Era Pump Systems - Farmingdale, NY
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of pumps or dispensers including component assemblies for fluid dispensing. Available with infusion flow rate up to 7,635 ml/hour & holds up to 140 cc syringes. Various features of pumps include programmable, built-in pump network drivers, audible alarms, keypad interfaces, automated fluid dispensers, non-volatile memory, power failure mode & RS-232 bi-directional controls.
B. Braun OEM Division - Bethlehem, PA
Manufacturer, Custom Manufacturer
Manufacturer Of Medical & Hospital Equipment & Supplies, Packaging
Fisnar Inc. - Wayne, NJ
Manufacturer, Custom Manufacturer
Manufacturer of fluid dispensers for miniature component bench assembly, adhesives, solder paste & automatic circuit board production applications. Specifications include 110 VAC & 220 VAC voltage power supply, 24 VDC internal voltage, 70 psi to 100 psi air input pressure & 1 psi to 100 psi. Features include manual or timer operation modes, suck-back operation, foot pedal or finger switch controlled, programmable timers & vacuum pencils. CE approved.
Brand Names: Fisnar
to Compare Suppliers or Email
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified July 28, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen