Ellsworth Adhesives - Locations
Distributor, Manufacturer, Custom Manufacturer
Distributor of a full line of encapsulants & encapsulations resins for potting electrical components.
Brand Names: 5 Minute Epoxy, Albion, Alloy Products, Armstrong, BD, Bennett, Black Max, Bondmaster, Bostik,...
www.ellsworth.com/Encapsulants/

Dymax Corp. - Torrington, CT
Manufacturer
ISO 9001:2008 certified manufacturer of light-curable electrical potting compounds that cure tack free in seconds upon exposure to UV/Visible light. Each potting material is engineered to bond different substrates, offering tenacious adhesion to plastics & metals. LED protection potting materials are also available to enhance LED performance. UV potting resins reduce waste from off-ratio mixing & are free from isocyanates & heavy metals. Processing in seconds eliminates fixtures, jigs, racks, & ovens to increase space & lower total inventory costs. The materials are suitable for shallow potting & sealing of connectors, inductors, detectors, capacitors, RF circuits, relay screws, sensors, tamper proofing, & PCB encapsulation.
www.dymax.com/products/electronic/potting_m...

United Resin Corp. - Royal Oak, MI
Manufacturer, Custom Manufacturer
Electrical potting, encapsulating, SMT, COB, fiber optic, 94VO approved, Penta-BDE free, one & two component systems, soft UL systems, high temperature (500 Degrees F), thermally conductive & insulating systems.
www.unitedresincorp.com

Copps Industries, Inc. - Mequon, WI
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified manufacturer of standard & custom epoxy electrical encapsulation & potting. Products include automotive assembly adhesives, surface mount device adhesives, motor magnet adhesives, electrically conductive adhesives, multipurpose adhesives & heat/ambient cure & high temperature potting adhesives. Heat cured & high temperature potting & encapsulation systems are available in viscosities ranging from 1100 cps to 15500 cps. Magnet adhesives are available as a soft paste. Applications include transformers, ballasts & ignition coils.
www.coppsindustries.com/products/electrical...

SpecCoat - Fremont, CA
Custom Manufacturer, Service Company
ISO 9001:2008 certified applicator specializing in encapsulation or potting of printed circuit boards. Silicones, polyurethanes & acrylics are available for all applications acting as a barrier against moisture, dust & most environmental contaminants. Also offered is brushing for small production quantities of printed wiring assemblies, touch-ups or when only selected sites require thorough coating. Quick turnaround as well as pick-up & delivery service available.
www.speccoat.com/potting.html

Althor Products, LLC - Windsor Locks, CT
Distributor, Manufacturer, Custom Manufacturer
Manufacturer & distributor of potting & encapsulation equipment, potting materials & electrical potting such as plastic potting boxes made from black ABS. Dimensions range from7/16 L x 7/16 W x 3/8 H in. to 3 15/16 L x 2 3/8 W x 1 H in. Specially designed to encapsulate electronic component assemblies to give protection from environmental hazards.
www.althor.com/

Von Roll USA, Inc. - Schenectady, NY
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of insulation materials and products including electrical potting. Available as two-component potting. Two-component potting is used for electrical and electronic applications. Other products such as resins, varnishes, UV-curing coatings, UV-curing glues and adhesive systems are also available.
Brand Names: Damilux
www.vonroll.com/en/resins-and-varnishes.htm...

RPC Electronics - Highland Heights, OH
Custom Manufacturer, Service Company
Custom manufacturer of electrical potting. Types of electrical potting include epoxy & thermoplastic potting. Other products such as cable assemblies, wire harnesses, chassis boxes, panels, enclosures, sensor assemblies & electromechanical assemblies can be fabricated. Capabilities include prototyping, turnkey manufacturing, testing, assembly, integration, packaging & shipping. Electronic design engineering services, contract manufacturing services, materials management outsourcing services, supply chain management services, fulfillment services & new product introduction services are available. Electronic products are UL® certified.
www.rpcelectronics.com/Mech_Assem_Out_Serv....

Robert McKeown Co., Inc. - Branchburg, NJ
Distributor, Manufacturer, Custom Manufacturer, Service Company
Veteran owned. ISO 9001:2008 certified. Stocking distributor & custom fabricator of electrical potting compounds or materials including silicone & gel encapsulants. Specifications of encapsulants vary depending upon types & include 0.95 to 2.13 specific gravity, 24 durometer to 87 durometer hardness, 425 cPs to 66,700 cPs viscosity. Encapsulants are available in various colors including translucent, black, red, clear & gray & are used for protecting circuit boards & electronic assemblies.
Brand Names: Dow Corning, Sylgard
products.robertmckeown.com/category/potting...

Electrical Potting Products
	Potting/Encapsulants

EECMI - Waukesha, WI
Custom Manufacturer, Service Company
Custom manufacturer of electrical potting. Additional services include packaging, marking, kitting, soldering, repair, refurbishing & assembly services.
www.eecmi.com/index.html

GS Polymers, Inc. - Mira Loma, CA
Manufacturer, Custom Manufacturer
Worldwide custom manufacturer of electrical potting materials. Features of potting compounds include polyurethane cure system, mix ratio ranging from 1A:1B to 1A:2B by volume, gel time ranging from 3 min. to 2 hours & cure conditions ranging from 1 hour to 24 hours at room temperature & heat cure. Optically clear soft & hard, water, UV & impact resistant potting compounds are also available.

Michigan Adhesive Manufacturing Inc. - Spring Lake, MI
Manufacturer
Manufacturer of sealants & adhesives.

Avant-Garde Technology, Inc. - Jamison, PA
Manufacturer, Custom Manufacturer, Service Company
Material selection & high-vacuum encapsulation with equipment capable of maintaining 1 torr or better of vacuum. Encapsulation materials have withstood rigorous tests, from space travel to being boiled in sulfuric acid for two weeks. Electrical potting & encapsulation services.

Magnolia Plastics, Inc. - Chamblee, GA
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified custom manufacturer of electrical potting materials & compounds. Specifications of potting compounds include 1.5, 1.6 & 1.8 specific gravity, 40,000 cps viscosity, flash point less than 100 degrees C & 0.14 percent water absorption. Potting compounds are suitable for industrial, commercial, automotive, aerospace & building & construction applications. Meets ASTM standards.

Electronic Design Inc. - Sheboygan Falls, WI
Manufacturer, Service Company
ISO certified manufacturer providing electronic control designing services. Products include Electrical Potting. Each unit has an electronic design that uses an epoxy resin for electical potting.

PVA Tepla America, Inc. - Corona, CA
Distributor, Manufacturer, Service Company
ISO 9001:2008 registered potting services for electrical or electronic devices. Capabilities include protection from moisture, high/low temperatures & physical & electrical stress. CE certified.

American Epoxy & Metal, Inc. - Bronx, NY
Manufacturer, Custom Manufacturer, Service Company
Electrical potting services. Materials handled include NEMA grade G10 epoxy, NEMA grade G11 epoxy, NEMA grade XPC/XX paper phenolics & epoxy silica filled & unfilled tubes.

A.S.A.P. Technologies, Inc. - Buford, GA
Distributor
Minority-owned ISO 9001:2000 certified & AS 9120:2002 certified distributor of electrical potting including 2-part RTV silicone potting & encapsulating compounds, fast curing compounds & sealants. Potting compounds are available in general purpose pourable, high & low temperature pourable, primer less adhesion pourable, paste & gel formulations. Potting compounds are designed to protect connectors, switches, components & coils from dust, moisture & shock. Used in aerospace, electrical & mechanical applications. Potting compounds are FDA compliant. Meet Mil-S-23586 specifications.

GC Electronics, Inc. - Rockford, IL
Manufacturer, Custom Manufacturer
Custom manufacturer of potting materials & systems including thermally conductive potting epoxy & adhesives. Specifications of potting adhesives include minus 40 degrees C to plus 150 degrees C operating temperature, 430 V/mil dielectric strength, 7.34 btu thermal conductivity & 1:1 mix ratio. Potting adhesives are also available with black casting resin formulation & abrasive aluminum oxide fillers. Potting adhesives are suitable for industrial & commercial applications. RoHS compliant.
Brand Names: GC Electronics

Graco, Inc. - Minneapolis, MN
Manufacturer, Custom Manufacturer
ISO 9001:2000 & ISO 14001:2004 certified manufacturer of fluid handling equipment & components such as pumps & pump packages, proportioners, meters & controls, gas & electric airless sprayers, applicators, guns & accessories. Accessories include in-line filters, coalescers, washers, fluid management systems, hoses, hose reels, fluid heaters, cleaning kits, mixers, conductive gloves, valves, pressure tanks & cups. Hot melt pumps & packages include heated rams, hot melt tanks, compensators & regulators. Pumps include centrifugal, diaphragm, fuel transfer, piston, electric pumps, air operated pumps & dispensing pumps & electric oil dispensing systems. Applications include finishing, construction, insulation, sealants & adhesives spraying, aerospace, marine, offshore, food processing, automotive, electronic, process equipment, foam spraying, coatings, lubrication equipment, contractor equipment & sanitary equipment. Design, engineering & technical support available.

Glotrax Polymers Inc. - Warkworth, ON
Distributor, Manufacturer
Manufacturer & distributor of potting compounds & encapsulants. Potting compounds & encapsulants are epoxy-based formulations that form a protective shield around the components they encase. Designed for various, bonding, potting & encapsulating applications where insulation is required. Available in a variety of viscosities, such a two-part, flowable, non-corrosive, environmental & chemical resistance.

Epoxy Formulations Inc. - Denver, CO
Manufacturer, Custom Manufacturer
Custom manufacturer of epoxy potting compounds including electrical potting compounds for electrical potting applications. Specifications of electrical potting compounds include mixed density ranging from 12.8 lbs./gal. to 13.0 lbs./gal., 24 hours cure cycle, 40 minutes to 150 minutes gel time, 20 minutes to 70 minutes working time & 7,500 cps to 12,000 cps mixed viscosity. Features include 180 degrees C temperature ratings, 1/8 in. flame retardancy & thermal shock resistance. Meets ASTM standards.

Jem Electronics - Franklin, MA
Manufacturer, Custom Manufacturer
Lean manufacturing capable ISO 9001:2000 & TS 16949 certified potting services including electrical potting. Potting can be performed on silicone-based materials used in high voltage applications & two-part epoxy compounds. Capabilities include semi-automated crimping, automated wire & cable processing, engineering design, fiber optic cables stocking, power cords stocking, injection molding, semi-automated coaxial cable stripping, wire & cable stripping, soldering, sonic welding, testing, mass production, prototyping, logistics planning & inventory management. Markets served include automotive, telecommunications, military, recreation, consumer electronics, medical, computer, semiconductor & federal government. On time delivery available. UL® & CSA® registered.