Encapsulation Resins

Home > Supplier Discovery > Supplier Results for Encapsulation Resins

Provide Feedback

Encapsulation Resins Suppliers

Displaying 1 to 25 out of 63 results
to Compare Suppliers or Email
Ellsworth Adhesives - Locations Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer
Distributor of a full line of encapsulants & encapsulations resins for the complete surrounding of electronic equipment with a coating of insulative material to protect the component from environmental conditions.
Brand Names: 5 Minute Epoxy, Albion, Alloy Products, Armstrong, BD, Bennett, Black Max, Bondmaster, Bostik,...
Dymax Corp. - Torrington, CT Browse our catalog of products
ISO 9001:2008 certified manufacturer of UV encapsulation resins for microelectronic assembly. Light-curable transparent encapsulants are tough, flexible & cure in seconds upon exposure to UV light. RoHS compliant 9000 Series encapsulating materials have high ionic purity, adhesion, & resistance to humidity & thermal shock to effectively protect components. Encapsulants contain no sharp, abrasive mineral or glass fillers to abrade fine wires & their combination of low Tg & low modulus means low stress. UV curing transparent coatings are suitable for glob top & chip on board applications & are especially suited for encapsulating IC's in flex circuits. Clear & black coatings are available in a wide range of viscosities, from thin wicking to non-flowing gel.
Brand Names: Dymax, SpeedMask, Ultra-Red
Epoxies Etc. - Cranston, RI Browse our catalog of products
Manufacturer, Custom Manufacturer
ISO 9001:2008 registered manufacturer of electronic insulating compounds, including potting, casting, & encapsulation resins for such applications as protecting, insulating, & concealing circuitry, components, & devices. Industries served include electronic, electrical, automotive, & aerospace. Variety of durometers & cure schedules. Custom formulations available.
Brand Names: Deco-Coat
United Resin Corp. - Royal Oak, MI Browse our catalog of products
Manufacturer, Custom Manufacturer
Electrical potting, encapsulating, SMT, COB, fiber optic, 94VO approved, Penta-BDE free, one & two component systems, soft UL systems, high temperature (500 Degrees F), thermally conductive & insulating systems.
Master Bond, Inc. - Hackensack, NJ Browse our catalog of products
Manufacturer, Custom Manufacturer, Service Company
Manufacturer & formulator of encapsulation resins designed to protect electronic circuitry, PCBs & microelectronic assemblies from moisture, corrosive chemicals, excessive heat, vibration, mechanical impact, thermal shocks & abrasion. Application engineering & full technical support provided. Custom manufacturer of resins for encapsulation applications. Encapsulating resins include epoxy resins & urethane resins, UL listed. Thermally conductive electronic resins for encapsulation in heat sink bonding, surface mount & die attach applications insulating resins & concealing circuitry. UV encapsulation resins cure in seconds, liquid potting compounds & electronic module encapsulants.
Sartomer USA, LLC - Exton, PA
Manufacturer, Custom Manufacturer
Global supplier of monomers, oligomers & other resins used for ultraviolet & electron beam, light cured, peroxide & two-part epoxy/amine curing applications.
Brand Names: M Cure, Sartomer
Copps Industries, Inc. - Mequon, WI
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified manufacturer of standard & custom electrical encapsulation resins. Products include automotive assembly adhesives, surface mount device adhesives, motor magnet adhesives, electrically conductive adhesives, multipurpose adhesives & heat/ambient cure & high temperature potting adhesives. Heat cured & high temperature potting & encapsulation systems are available in viscosities ranging from 1100 cps to 15500 cps. Magnet adhesives are available as a soft paste. Applications include transformers, ballasts & ignition coils.
Michelman - Cincinnati, OH
Manufacturer, Custom Manufacturer, Service Company
ISO 9000 certified worldwide manufacturer of standard & custom resins including encapsulation, wet strength & water borne resins. Types include paint, coating, emulsion, dispersion, ink, adhesive, sealant, wood coating & stain resins. Coating resins are available in anionic & nonionic emulsions, solvent dispersions & in high density polyethylene, microcrystalline, paraffin, maleated polypropylene, carnauba, ethylene acrylic acid & polyethylene wax types. Specifications of non-ionic polyethylene emulsions include viscosity less than 200 cps, pH value ranging from 4.0 to 10.0 & specific gravity ranging from 0.95 g/cu. cm to 0.97 g/cu. cm.
Brand Names: Hydrosize, U-Nyte
Von Roll USA, Inc. - Schenectady, NY
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of encapsulation resins. Encapsulation resins are available for both low voltage and high voltage applications based on alkyds, acrylics, urethanes, polyesters, polyesterimides, epoxies and silicones. Encapsulation resins are used for electrical equipment and electronic equipment applications such as rotating machines and transformers.
Brand Names: Damilux
Hapco, Inc. - Hanover, MA
Manufacturer, Custom Manufacturer
Manufacturer of resins for encapsulation & molding applications. Available as liquid molding plastic resins & two-part epoxy resins. Liquid molding plastic resins such as casting resins, polyurethane resins, production-grade resins, crystal-clear casting resins, elastomeric resins, silicone rubber resins, FDA grade plastic resins, rigid plastic resins, low-shrink casting resins & ultra-alloy plastic resins are available. Types of two-part epoxy resins include all-purpose rigid casting epoxy resins, surface coating epoxy resins & epoxy laminating resins. Available in different formulations.
Brand Names: Castalloy, Hapflex, Hapsil, S-Rim, Steralloy, Tuffalloy, Ultracast, Ultraclear, Ultralloy
Creative Materials, Inc. - Ayer, MA
Manufacturer, Custom Manufacturer
ISO 9001 certified custom manufacturer of epoxy encapsulation coatings including resins. Encapsulation resins are available with 15,000 cps to 20,000 cps viscosity, 30 minutes curing time at 150 degrees C temperature, 1.21 specific gravity, 0.189 percent cure shrinkage, 121 degrees C heat distortion temperature, 9,600 psi tensile strength, less than 0.22 percent water absorption, 450 V/mil. dielectric strength, 0.03 W/VA power factor and less than 85 shore D hardness.
Northstar Polymers, LLC - Minneapolis, MN
Manufacturer, Custom Manufacturer
Manufacturer of polyurethane resins used in encapsulation applications. Formulations are used in semi-medical products, consumer commodities, material-handling parts, rollers/sprockets, concrete mold/form, defense/military, & many other specialty applications. Produce various types of polyurethane gel, foam, & non-foam solid elastomer formulations using a variety of raw materials such as MDI, TDI, H12MDI, IPDI polyether base polyols, polyester base polyols & various others. Specialty custom formulation capacity can cover the above mentioned classes of materials as well as thermoplastic polyurethane, polyurethane/urea spray coatings, polyurethane dispersions. Development of the best suited polyurethane materials for the application based on the material property requirements, process requirements, as well as quality control requirements.
Polycast Industries, Inc. - Bay Shore, NY Browse our catalog of products
Manufacturer, Custom Manufacturer
Custom manufacturer of encapsulation resins including epoxies, urethanes & silicones. Resins are available in various sizes, colors, viscosities & specific gravity.
Cotronics Corp. - Brooklyn, NY
Manufacturer, Custom Manufacturer
700 Degrees F Epoxy Adhesives, Potting Compounds, Protective Coatings Chemical & Corrosion Resistant
Heigl Adhesive Sales - Bloomington, MN
Distributor, Manufacturer, Custom Manufacturer
Distributor of encapsulation, epoxy & insulating resins including liquid potting compounds & 1 & 2 component electronic module encapsulants with low viscosity & temperature cure. Types of epoxy resins include low & medium viscosity, undiluted & silica filled room temperature epoxies, heat cure epoxies, coatings, urethanes & 2 component flame out & flame retardant casting compound. Features include low coefficient of expansion & shrinkage & thermal properties. Applications include solenoids, capacitors, transformers, castings, coils, relays, resistors, connectors, end caps, sealing filters & potting. Also available formulated liquid systems to encapsulate coils & sensors in automotive industry.
Brand Names: Hysol
ITW Insulcast - Roseland, NJ
Manufacturer of reactive silicone bonding & adhesive resins. Features include encapsulation, fast drying, pink-red color, 1 cps viscosity, specific gravity 0.83 gm/cc, acetone/alcohol solvent & 20 degree C flash point. Applications include adding adhesion of two component addition cure RTV silicones & mold making compounds & variety of substrates to which two component RTV Silicones have little or no adhesion. Ideal for metal, wood, glass, ceramics & plastics & can be applied by dipping, brushing & spraying. Industries served include electrical, utility, rail transportation, aerospace, telecommunications, product assembly, automotive, power generation & electronic.
Innovative Polymers, Inc. - Saint Johns, MI
Manufacturer of encapsulation resins & adhesives including polyurethane. Industries served include automotive, electrical/electronic equipment potting, medical, military, prototyping/product development, sculptures, sports, taxidermy, theme parks & architectural. RoHS compliant.
Zymet - East Hanover, NJ
Microelectronics Adhesives & Encapsulants. Electrically Conductive, Anisotropically Conductive, Thermally Conductive & Low Stress Adhesives For Die Attach, Substrate Attach & Flip Chip Interconnection
ITW Polymer Technologies, Insulcast Div. - Montgomeryville, PA
Manufacturer of thermally conductive & electronic resins for encapsulation. Resins are designed to protect components in heat sink bonding, surface mount & die attach applications. Resins available include enhanced thermal conductive, low stress & low coefficient of thermal expansion, UL recognized for flame class 94V-0, thermal shock resistant, conformal & dip coating, low density & room temperature curing resins. Electrical specifications include dielectric strength 455 V per mil with dielectric constant 4.2 at 1 kHz., dissipation factor 0.026 at 1 kHz. & volume resistivity 2 quadrillion ohm-cm. Physical specifications include hardness 85 durometer, tensile strength 12,000 psi, tensile elongation 3 percent, compressive strength 16000 psi, flexural strength 18000 psi & coefficient of thermal expansion 0.000075. Resins are ideal for protecting components in heat sink bonding, surface mount & die attach applications.
Cytec Industries, Inc. - Carmel, IN
Waste Water Treatment Chemicals
Cytec Engineered Materials - Winona, MN
Manufacturer Of Thermosetting Molding Compounds Including Epoxies, Phenolics, Silicones, Polyimides, Polyester & Vinyl Ester BMC's. Space Age Ablative Composites & Carbon-Carbon Materials Are Also Manufactured. Qualifying To ISO 9000 Standards
Cytec Industries, Inc. - Willow Island, WV
Ultraviolet Lighting Absorbers, Biocides, Curing Agents & Stabilizers
Alfa International - Woonsocket, RI
Manufacturer, Custom Manufacturer
Worldwide manufacturer of encapsulation & casting resins. Encapsulation resins include potting & casting resins reinforced with fiberglass for large unit encapsulation, resins that protect from moisture vapor & thermal shock, low shrinkage & high tensile resins, fire retardant, heat resistant & 2 component silicones.
ITW Polymer Technologies - Montgomeryville, PA
Manufacturer, Custom Manufacturer
Manufacturer of epoxy adhesives & resins for rubber-to-metal & glass bonding with specificatons. Other adhesives available include two-component, high impact epoxy adhesive system for bonding metal hammer heads to metal, fiberglass or wood handles. Meets ASTM & Military specifications.
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified April 21, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen