ThomasNet.com

Epoxy Potting Systems

Home > Supplier Discovery > Supplier Results for Epoxy Potting Systems




Provide Feedback

Epoxy Potting Systems Suppliers

Displaying 1 to 25 out of 34 results
to Compare Suppliers or Email
Epoxies Etc. - Cranston, RI Browse our catalog of products
Manufacturer, Custom Manufacturer
ISO 9001:2008 registered manufacturer of epoxy potting systems, including potting, encapsulating, & casting resins for aerospace, automotive, electronic & electric industries. Applications include protecting, insulating, & concealing circuitry, components, & devices. Variety of durometers & curing schedules. Custom formulations available.
www.epoxies.com/products/
Copps Industries, Inc. - Mequon, WI
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified manufacturer of standard & custom epoxy electric encapsulants & potting systems. Products include automotive assembly adhesives, surface mount device adhesives, motor magnet adhesives, electrically conductive adhesives, multipurpose adhesives & heat/ambient cure & high temperature potting adhesives. Heat cured & high temperature potting & encapsulation systems are available in viscosities ranging from 1100 cps to 15500 cps. Magnet adhesives are available as a soft paste. Applications include transformers, ballasts & ignition coils.
www.coppsindustries.com/products/electrical...
Epoxyset, Inc. - Lincoln, RI Browse our catalog of products
Manufacturer
ISO 9001:2008 certified manufacturer of epoxy potting systems & encapsulation compounds for electronic ballasts, capacitors, power supplies & relays. Types include low expansion, thermally conductive, high temperature, silicone & urethane potting & encapsulating compounds. Industries served include electrical, telecommunications, power supplies & electronic industries.
catalog.epoxyset.com/category/potting-encap...
Ellsworth Adhesives - Locations Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer
Distributor of a wide selection of epoxy potting systems.
Brand Names: Cytec, Loctite
www.ellsworth.com/Encapsulants/
Master Bond, Inc. - Hackensack, NJ Browse our catalog of products
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of epoxy potting systems & epoxy encapsulation systems to encapsulate circuit boards & semiconductors, fill containers of electronic components & infiltrate electrical coils. Application engineering & full technical support provided. Encapsulants, molding compounds, potting compounds, electrical resins & electronic compounds form a thermally conductive layer to heat sink improving heat dissipation. Gap filling, underfill compounds, glob top or daub-type compounds insulate semiconductor dies on printed circuit boards (PCB). Low viscosity resins, varnishes impregnate coils or die bonding compounds. Protection ESD, EMI & RFI.
www.masterbond.com/applications/potting-and...
United Resin Corp. - Royal Oak, MI Browse our catalog of products
Manufacturer, Custom Manufacturer
Electrical potting, encapsulating, SMT, COB, fiber optic, 94VO approved, Penta-BDE free, one & two component systems, soft UL systems, high temperature (500 Degrees F), thermally conductive & insulating systems.
www.unitedresincorp.com
Accurate Plastics, Inc. - Yonkers, NY Browse our catalog of products
Manufacturer, Custom Manufacturer
ISO 9001:2008 certified manufacturer of standard & custom thermoset epoxy potting systems. Available as plastic laminate sheets, laminate pre-cut panels, laminate tubing, laminate round rods, laminate molded rods & angles. Types of thermoset epoxy potting systems include NEMA grade G10/FR4 or G10/non FR4 glass cloth reinforced epoxy & NEMA grade G11/FR5 or G11/non FR5 glass cloth reinforced epoxy potting systems.
Brand Names: Epoxyglas
accurateplastics.acculam.com/
Adhesive Systems Technology - New Hope, MN
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of metering, mixing & dispensing machinery & potting & encapsultion equipment. Dispensers for adhesives, sealants & gaskets & potting, encapsulation & molding compounds, in epoxy, polyurethane, acrylic, silicone, polysulphide & urethane.
www.ast-corp.net/industrial_applications_po...
Nyatex Adhesive & Chemical Co. - Howell, MI
Manufacturer, Custom Manufacturer
ISO 9000:2008 certified. Manufacturer of epoxy compounds, adhesives, resins, laminates & potting systems for construction applications. Types of assembly adhesives include heat-seal, epoxy, hot melt & wood working adhesives. Heat seal adhesives can be applied to cellulose & various substrates. Epoxy adhesives have adhesion to a variety of substrates & can be used in applications requiring solvent & abrasion resistance. Hot melt adhesives have tack & high temperature resistance & can be used for carton sealing applications. Water resistant wood working glue can be used to bond cellulose, fabrics & porous surfaces. Clear & hard films for instrument panels & tool handles are also available.
www.nyatex.com/light-assembly-adhesives.htm...
SP&S - Valencia, CA
Distributor, Manufacturer, Custom Manufacturer
ISO 9001:2008 manufacturer & distributor of standard & custom specialty polymers including adhesives, coatings, sealants, encapsulants, mold-making materials & tooling materials. Products include casting compounds, conformal coatings, electrical potting materials, foams & syntactics, laminating resins, anti-foams/de-foamers, mold releases, primers release agents, structural potting materials, tooling resins, tooling board materials, thermally/electrically conductive materials, colorant, pigments & dyes. Materials are available in different packaging options including syringes, cartridges, squeeze bottles, jars & cans, brush-in-lid containers, pails, drums, totes & lined containers. Services include contract manufacturing, assembling, packaging, filling, kitting & consulting. Markets served include aerospace, automotive, electronics, industrial manufacturing firms, laboratories, universities & governmental departments. Materials meet Military Specs., federal specifications & MIL-I-45208 & MIL-STD-45662 standards. JIT delivery available.
www.spolymers.com/index.html
Polycast Industries, Inc. - Bay Shore, NY Browse our catalog of products
Manufacturer, Custom Manufacturer
Custom manufacturer of thermal & electrical conductive epoxy potting systems. Epoxy potting systems are available in various sizes & configurations with specifications including 5 cps to 250,000 cps viscosity & 0.95 to 3.63 specific gravity. Epoxy potting systems are flame retardant & thermal shock & chemical resistant.
www.polycastindustries.com/
Cotronics Corp. - Brooklyn, NY
Manufacturer, Custom Manufacturer
700 Degrees F Epoxy Adhesives, Potting Compounds, Protective Coatings Chemical & Corrosion Resistant
www.cotronics.com
Magnolia Plastics, Inc. - Chamblee, GA
Manufacturer, Custom Manufacturer
Custom manufacturer of epoxy potting systems. Specifications of epoxy potting systems include 1.5, 1.6 & 1. 8 specific gravity, 40,000 cps viscosity, flash point less than 100 degrees C & 0.14 percent water absorption. Epoxy potting systems are suitable for industrial, commercial, automotive, aerospace & building & construction applications. Meets ASTM standards.
A.S.A.P. Technologies, Inc. - Buford, GA
Distributor
Minority-owned ISO 9001:2000 certified & AS 9120:2002 certified distributor of epoxy potting systems & potting compound dispensers. Epoxy systems include applicator gun & cartridges.
Brand Names: Dev-Tube
Jesco Products Company, Inc - Sterling Heights, MI
Manufacturer, Custom Manufacturer
Manufacturer of meter, mix, dispense & pumping equipment including fluid flow valves & process verification systems for manual or robotic application of adhesives, sealers & fluids of all types. Lubricating & fluid fill systems.
Crosslink Technology Inc. - Buffalo, NY
Manufacturer, Custom Manufacturer
Formulated Epoxy & Polyurethane Materials For Casting/Encapsulating Electrical/Electronic Assemblies As Well As Mechanical Devices. Low Shrinkage Materials For Ferrite Cores & Pressure Sensitive Electronics. ISO 9002
All-Pro Fasteners - Arlington, TX
Distributor, Manufacturer, Custom Manufacturer
ISO 9001:2008 certified. Manufacturer & distributor of standard & custom rod & yoke ends, screw eyes & epoxy potting systems. Testing capabilities include tensile, proof-load, hardness, torque shear, failure analysis, hydrogen embrittlement, magnetic permeability, rotational capacity & fatigue, adhesion & bend testing. Materials used include aluminum, stainless steel, Inconel®, Monel®, Hastelloy®, silicone bronze & Monel®. Other capabilities include kitting, assembly, custom labeling & barcoding. Industries served include OEM (original equipment manufacturer), MRO (maintenance, repair & overhaul), tower & pole, petrochemical, structural steel, metal building, water utility & wind energy. Meet ANSI/ASME, ASTM & military specifications. JIT delivery
GS Polymers, Inc. - Mira Loma, CA
Manufacturer, Custom Manufacturer
Worldwide custom manufacturer of epoxy adhesive casting & potting systems. Two part epoxy casting system has shelf life of 6 months, gel time of 90 min. & cure time of 24 hours. Potting systems are available in cartridges.
Ashby Cross Co., Inc. - Newburyport, MA
Manufacturer, Custom Manufacturer
Manufacturer of dispensing systems for potting abrasive materials including epoxies. Types including double acting piston meter mix system for high production throughput & single acting piston meter-mix system for production potting with materials having high concentration of fillers, bench-top dispensers for proportioning, mixing & dispensing 2-part adhesives. Variable ratio metering & mix system, gear meter-mix systems & dual barrel cartridge dispensers are also available..
ITW Insulcast - Roseland, NJ
Manufacturer
Manufacturer of heat cured one-component epoxy compounds in semi-rigid, rigid & flexible. Features include clear, black, flame retardant, thixotropic, thermally & electrically conductive. Rigid epoxies application include protect components in heat sink bonding, surface mount, die attaching & top coating over components on micro-circuitry. Flexible epoxies are for coil impregnation & potting applications requiring low viscosity, minimal thermal stress & coating applications. Industries served include electrical, rail transportation, aerospace, telecommunications, automotive, power generation & electronic. Meets ASTM & Military specification.
R.C. Davis Co., Inc. - Farmingdale, NY
Manufacturer
Epoxies & coatings are manufactured exclusively for heavy duty industrial & commercial applications. Specialty epoxy products for heavy forklift traffic, wet surface/cold temperature applications. Oil/grease saturated areas, expansion joint repairs, chemical erosion, non-slip surfaces.
John Greer & Associates - San Diego, CA
Distributor, Manufacturer
Distributor of compounds a semi-rigid epoxy available in clear amber or black & a flexible urethane elastomer available only in black. Both are designed to protect circuitry from shock, impact, vibrations & the elements. Flexible urethane elastomer is also widely used for potting of underwater cables, terminals, and oceanographic equipment.
Innovative Resin Systems, Inc. - Wayne, NJ
Custom Manufacturer
Custom Formulator And Manufacturer Of Structural Adhesives, Coatings, Pottings And Encapsulating Compounds.
GC Electronics, Inc. - Rockford, IL
Manufacturer, Custom Manufacturer
Custom manufacturer of potting materials & systems including thermally conductive potting epoxy & adhesives. Specifications of potting adhesives include minus 40 degrees C to plus 150 degrees C operating temperature, 430 V/mil dielectric strength, 7.34 btu thermal conductivity & 1:1 mix ratio. Potting adhesives are also available with black casting resin formulation & abrasive aluminum oxide fillers. Potting adhesives are suitable for industrial & commercial applications. RoHS compliant.
Brand Names: GC Electronics
American Epoxy & Metal, Inc. - Bronx, NY
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of epoxy potting systems & rod products including enclosures, cases, cups, boxes & tubes. Available in NEMA Grade G10 epoxy, NEMA Grade G11 epoxy & NEMA Grade XPC & XX paper phenolic material. Round enclosures are fabricated from epoxy filled & unfilled tubing. Features include chemical resistance & high flexural deformation temperatures ranging from 150 degree C to 160 degree C. Meet Mil-I-24768/27 GEE-F, Mil-I24768/28 GEB-F & Mil-I-24768 / 12 PBM, / 11 PBG, / 10 PBE specifications.
to Compare Suppliers or Email
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified April 25, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen