Taco, Inc. - Cranston, RI
Manufacturer, Custom Manufacturer
ISO 9001:2008 certified custom manufacturer of vertical pumps for industrial applications including domestic water flow & cooling towers. Specifications of industrial pumps include 2500 gpm maximum flow, 175 psi to 300 psi maximum operating pressure & 250 degrees F operating temperature. Features of industrial pumps include machined mounting surface with tapped holes, casing drain, replaceable optional wear ring, pump support bracket, external seals, throttle bushing, seal flush lines, pressure tapping on suction & discharge & aluminum coupling. Meets ASTM standards.
Brand Names: Pro Fit, Taco
www.taco-hvac.com/en/products/Water+Circula...

CAT PUMPS® High Pressure Pumps & Systems - Minneapolis, MN
Custom Manufacturer
Manufacturer of triplex piston & plunger pumps. Piston pumps feature UNI-FLOW design for smooth low pulsation flow & strong suction. Bare-shaft pumps up to 60 GPM, 1500 PSI or custom piston pumping systems.
www.catpumps.com/custom-pumping-systems.asp

Flow Pumps Products
	Plunger Pumps - Brass Manifolds with Buna Seals and O-Rings Plunger Pumps - Nickel Aluminum Bronze Manifolds with Buna Seals and O-Rings Plunger Pumps - 316 Stainless Steel Manifolds with Buna Seals and O-Rings More

K/M Specialty Pumps and Systems, Inc. - Chandler, IN
Distributor, Service Company
Distributor of flow pumps. Types of pumps include piston, chemical metering, dewatering, grease, end suction, inline, sump, sewage, regenerative turbine, rotary lobe positive displacement, vertical, self priming, trash, sewage grinder, non-clog & air operated diaphragm pumps. Pumps are made from stainless steel, cast iron, aluminum, bronze, Hastelloy®, acetal, polypropylene & polyvinyl difluoride.
Brand Names: ARO, Alfa Laval, American Turbine, American-Marsh Pumps, Aurora, Barnes/Crown, EBARA Fluid...
pumps.kmspecialty.com/category/pumps

Flow Pumps Products
	MTH Single Stage Turbine Pumps MTH High Pressure Multi-stage Turbine Pumps MTH Single Stage Close-Coupled Turbine Pumps More

AB Industrial - West Chester, PA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer & distributor of flow pumps. ANSI, slurry, end suction, machine tool, horizontal, self primer, vertical, mag-drive.
Brand Names: Armstrong, Aurora, B&G, Corcoran, Dean, Deming, Durco, Flowserve, G&L, Gorman-Rupp, Goulds,...
www.abpump.com/pumps.php

Tri-Rotor, Inc. - Torrington, CT
Manufacturer
Producer of adjustable flow pumps suitable for pumping a wide variety of materials. Pumps feature maximum flow rates of 30, 88, 90, 100 and 240 GPM. They feature both clockwise and counterclockwise rotations that are reversible in the field. Supported materials include heat transfer oil, machine coolant, bitumen, lacquer, polyvinyl alcohol, vacuum pump oil, sodium silicate and propylene glycol.
Brand Names: Tri-Rotor
trirotor.rtrk.com/?scid=650935&rl_alt=http%...

Flow Pumps Products
	Foot Mounted Rotary Piston Pump, Up to 30 GPM - Series 20 Rotary Piston Pump, up to 40 GPM - Series 40

Union Standard/Union Confectionery - Bronx, NY
Distributor
Distributor of new & used flow pumps. Flow pumps are air operated & mounted on wheels.
Brand Names: Graco
www.unionmachinery.com/Product.asp?pid=4304

TR Engineering, Inc. - Scotts Valley, CA
Manufacturer
Manufacturer & designer of standard & custom variable flow & displacement hand pumps. Types of hand pumps also include modular, stainless steel, self-contained, single & double piston & aluminum hand pumps. System capabilities include design & fabrication of hydraulic power supplies & cylinders & computer-controlled automatic testing equipment. Made in the USA.
www.trengineering.com/special-products.htm

Horner Industrial Group - Indianapolis, IN
Distributor, Manufacturer, Custom Manufacturer, Service Company
Distributor of flow pumps.
hornerindustrial.rtrk.com/?scid=1980827&rl_...

Weir Minerals - Madison, WI
Manufacturer
Manufacturer of flow & displacement pumps. Types of pumps include horizontal, slurry, axial flow, submersible, vertical, self priming, diesel, pontoon, dewatering, centrifugal, process, piston, diaphragm, hydraulic, crankshaft driven, hose, vertical, turbine, hydrocarbon, water, acid, chemical, sulphur, specialty & nuclear pumps. Industries served include mining & mineral processing, mine dewatering, sand & gravel, chemical & fertilizers, power generation, pipeline transport, water & waste water & general.
Brand Names: Begemann Pumps, Floway, GEHO, Hazleton, Lewis Pumps, Multiflo, Warman
www.weirminerals.com/products.aspx

Dickow Pump Co. - Marietta, GA
Manufacturer, Service Company
ISO 9001 certified manufacturer of variable flow pumps. Types of pumps include magnetic coupled process, hot oil circulation, side channel & ANSI & vertical sealless & metal bellows mechanical seals pumps, multistage centrifugal, side channel & heavy duty process shaft sealed pumps.
Brand Names: Dickow
dickow.thomasnet.com/category/all-categorie...

Flow Pumps Products
	Metal Bellows Mechanical Seals Pumps with Shaft Sealing Multistage Centrifugal Pumps with Shaft Sealing Heavy Duty Pump according to API 610, 10th Ed. Series NCR

Hartell Pumps - Ivyland, PA
Manufacturer, Custom Manufacturer
Custom manufacturer of special flow pumps. Types of flow pumps include condensate removal pumps, waste water removal pumps, ice machine replacement pumps & magnetic drive circulating pumps.
www.hartell.com/corp/details/0,10294,CLI1_D...

Flow Pumps Products
	KT3 Series Pumps KT-15 Series Pumps KL-20 Series Pumps More

Vaccon Co., Inc. - Medway, MA
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom variable flow pumps including adjustable air powered vacuum pumps with vacuum flow rates of up to 120 SCFM & vacuum levels of up to 25 in. Hg. Features of variable flow pumps include non-clogging straight through venturi design with vacuum & exhaust in-line port. Applications include handling porous materials & operation in contaminated situations, picking & placing concrete block, packaging materials coated with fine powder & industrial air driven vacuum cleaners to remove liquid/solid mixtures from sump areas.
www.vaccon.com/Products.aspx

KSB, Inc. - Henrico, VA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of pumps & pump systems for water, wastewater, industry, energy, power, nuclear, & mining applications. Pump types include: canned motor pumps, mag-drive pumps, centrifugal pumps, wet well pumps, dry well pumps, high pressure pumps, positive displacement pumps, pump controls & monitoring systems, ultra high pressure pumps, ready-to-connect pump sets, circulator pumps. Service & spare parts: field service, regional repair services, spare parts.
www.ksbusa.com

Moyno, Inc. - Springfield, OH
Manufacturer
Manufacturer of Moyno® progressing cavity pumps for flow. Pumps can handle clean, clear liquids and shear-sensitive fluids as well as viscous, corrosive, abrasive, solids-laden slurries and sludges. Pumps deliver an accurate, repeatable, steady flow, even under low flow conditions and can handle viscosities over 1,000,000 cps. Pumps are available with capacities to 2,500 GPM and pressures to 2,100 PSI. Low-maintenance drive trains are available with gear-joint, open or sealed pin-type universal joints for extended service life.
Brand Names: Moyno
www.moyno.com/products-we-offer/all-product...

Friatec N.A., Engineered Products, LLC - Odessa, FL
Manufacturer, Custom Manufacturer
Manufacturer of flow pumps. Types of flow pumps include horizontal pumps, vertical pumps, self priming pumps, axial flow pumps, liquid ring vacuum pumps & solar power pumps. Materials used include cast iron, stainless steel, high alloys, titanium, polypropylene, polyethylene, PVDF, ETFE & ceramics. Applications include acids, caustics, bleaches, sulfuric acid production, phosphoric acid, sodium hydroxide & chlorine production, pickling lines, dip painting/galvanizing, fertilizer production, corrosive waste waters & corrosive/abrasive liquids. Available with 18 or 12 months warranty.
Brand Names: Friatec
www.friatecna.net/pumps.html

Cleaning Deburring Finishing, Inc. (CDF) - Quakertown, PA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Stocking distributor of high pressure & high flow pumps.
www.cdfindustries.com/pump.html

Coker Pump & Equipment Co. - Locations
Distributor, Custom Manufacturer
Distributor of engineered pump units with wide flow range. Flows range from 240gpm-25,000gpm. Markets include food processing, bio-tech, mining, pulp & paper, wastewater, chemical, aggregate, semi-conductor, pharmaceutical & all related manufacturing industries.
www.cokerpump.com/index.php?option=com_cont...

REPACO (Refrigeration Package Corp.) - Evansville, IN
Manufacturer, Custom Manufacturer
Manufacturer of packaged chillers pumping packages & systems tailored to customer needs. Custom designed pumping systems for cooling towers, process chillers, air conditioning systems, circulation & process loops or other fluid pumping applications. Systems can include single or multiple pumps, duplexed pumps, flow control & diverting valves, variable speed pump drives, circulating tanks, air separators, expansion tanks, PLC control systems & instrumentation. Engineering staff is available to to assist with unique application requirements & with the selection of the proper equipment configuration, tank & pump arrangement & control integration for the package best suited to meet application requirements. Custom engineered equipment uses readily available components.
repaco.net/pumptank.htm

Alemite Corp. - Fort Mill, SC
Manufacturer
ISO/TS 16949:2009 certified manufacturer of pumping systems, pumps & flow pumps. Types of pumps include grease pumps, oil pumps, undercoating pumps, diaphragm pumps, electric transfer pumps, chemical & material handling pumps & hydraulic pumps. Grease pumps such as high pressure grease pumps, manual grease pumps, pneumatic grease pumps & portable electric pumps are available. Types of oil pumps include medium pressure oil pumps, manual oil pumps & pneumatic oil pumps. Manual grease pumps such as bucket & loader-pumps are available.
www.alemite.com/catalog/details.aspx?identi...

Century Fasteners & Machine Company, Inc. - Niles, IL
Manufacturer, Custom Manufacturer
Woman-owned. Manufacturer and custom manufacturer of flow pumps. Various types include quart stroke, safety, rotary drum, lever action, siphon, PVC and heavy duty pumps. Vendor management programs (VMI) available. On-time delivery.

PumpMan, Inc. - Baldwin Park, CA
Manufacturer, Service Company
Repair & rebuilding services for centrifugal pumps including self-priming & axial flow pumps. Capabilities include troubleshooting, disassembly & reassembly, inspection, non-destructive testing, precise measuring, sandblasting, parts cleaning, shaft alignments, re-installation, redesign, upgrading & parts fabrication. 24/7 emergency service. On-time delivery.
www.pumpman.com/centrifugal-pump-repair.htm

Orr & Orr, Inc. - Bedford Park, IL
Distributor, Manufacturer, Custom Manufacturer
Distributor of flow & transfer pumps made from iron. Pumps are available with telescopic suction tubes, steel suction pipes, inlet tube strainers & filters & die cast heads. Pumps fits 15 gal. to 55 gal. drum capacity.
truck-hardware.orrorr.com/viewitems/all-cat...

Flow Pumps Products
	High-Flow Booster Pump

Tape Industrial Sales, Inc. - Louisville, KY
Distributor, Service Company
Distributor of high pressure or high flow pumps. Markets served include industrial & automotive.
Brand Names: Graco
www.tapeindustrial.com/pages/high_flow_pump...

Stoermer-Anderson, Inc. - Locations
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
Rep. of flow pumps & fuel oil pumps for cooling towers & HVAC systems. Factory authorized spare parts also available. Services include repair & maintenance of pumps. Applications include manufacturing industries, factories, & chemical units.
Brand Names: Armstrong
www.stoermer-anderson.com/products.html

U.S. Plastic Corp. - Lima, OH
Distributor, Custom Manufacturer
Producer of variable flow chemical transfer pumps with flow rates ranging from 120 milliliters to 2.2 liters (4.2 ounces to 0.6 gallons) per minute that pump fluids with a viscosity to 200 centipoises. Suction lift is 10 feet wet and 4 inches dry. Temperatures of fluids range from -40 degrees F to 200 degrees F (-40 degrees C to 93 degrees C). Direct-drive engineering provides maximum motor power to the pump. Many other pumps are available.
www.usplastic.com/catalog/default.aspx?cati...