Home > Supplier Discovery > Supplier Results for Gimbals

Provide Feedback

Gimbals Suppliers

Displaying 1 to 20 out of 20 results
to Compare Suppliers or Email
Artcraft Plating & Finishing Co., Inc. - Burbank, CA
Manufacturer, Service Company
Electroplating & electroforming services specializing in selective plating; available for most non-metalics ranging from plastics & woods to wax & fiberglass. Plating services include nickel, automotive, military specification, copper & gold. Exotic finishes are also available. Offerings include mold making, part manufacturing & plating for concept cars & restorations. Capabilities also include rapid prototyping & EMI/RFI shielding. ISO 9001:2000 compliant.
Aerotech, Inc. - Pittsburgh, PA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified manufacturer of optical alignment equipment & systems. Custom manufacturing of gimbals & optical mounts that provide ultra-precise angular position, rate & acceleration for development & production testing of a wide range of systems. Typical applications include missile seeker test & calibration, LIDAR, electro-optic sensor & FLIR testing, airborne target tracking, optical testing of space-based sensors in a vacuum & angular testing of inertial sensors such as gyros, MEMS, accelerometers & inertial reference units.
Herber Aircraft Service, Inc. - El Segundo, CA
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
AS 9100 certified custom manufacturer & distributor of welded bellows sealed gimbals. Gimbals are made from Inconel®, CRES steel, titanium & aluminum.
Brand Names: Eaton
Wire Cut Co., Inc. - Buena Park, CA Browse our catalog of products
Manufacturer, Custom Manufacturer, Service Company
EN/JISQ/AS9100:2004 certified & NADCAP approved manufacturer of gimbals utilizing EDM machining & drilling. EDM machining capabilities include tolerances held to plus or minus 0.0002 in., sizes up to 16 in. x 27 in., 24 in. thick & weights up to 2500 lbs. EDM drilling services include small hole (0.008 in.), high speed & micro hole drilling. Fine finishing, polishing & deburring available.
Aero Trades Manufacturing Corp. - Mineola, NY
Manufacturer, Custom Manufacturer
Gimbals. Complete facility for hydroforming, precision sheet metal fabrication, stampings, joining, dip brazed assemblies, spot welding, water jet cutting, deep drawn metal spinning for the aerospace & military industries.
Juno Lighting Group - Des Plaines, IL
Manufacturer, Custom Manufacturer
Manufacturer of lighting products including gimbals. Open back gimbals, front lamping gimbals and flared gimbals are available.
Ibex Engineering - Newbury Park, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified custom manufacturer of positioning stages including gimbals. Goniometer, gantries & assemblies are also available. Capabilities include designing, engineering & fabricating. Various markets served include medical device, aerospace, biomedical, pharmaceutical, semiconductor, disk drive & data storage, national labs, genomics, metrology, microscopy, drug discovery, life sciences, solar & flat panels.
Wescam - Healdsburg, CA
Manufacturer, Custom Manufacturer, Service Company
Electro-Optical Systems
Servos & Simulation, Incorporated - Longwood, FL
Manufacturer, Service Company
Manufacturer of gimbal systems. Capabilities include design and engineering of motion control systems and simulation systems for various industries such as aerospace, entertainment, and scientific industries.
C.F. Motion, Inc. - Largo, FL
For Robotic Joints
Sagebrush Technology, Inc. - Albuquerque, NM
Manufacturer Of Gimbals & Pan/tilt Positioners.
PVP Advanced EO Systems, Inc. - Tustin, CA
Manufacturer, Custom Manufacturer
Manufacturer of tracking systems including pan & tilt gimbals. Features include ethernet accessibility & direct drive servo motor. Specifications include 0.1 to 100 degrees per second azimuth velocity & 0.1 to 60 degrees per second elevation velocity, acceleration range 100 degrees per sq. second in azimuth & 60 degrees per sq. second in elevation, 18 bits electrical encoder resolution, position accuracy 0.005 degrees & 360 degrees continuous azimuth rotation. Tracking systems are resistant to humidity, salt fog, solar, blowing sand & dust & blowing rain & operate between minus 40 degrees C & plus 70 degrees C temperate. Applications include operating mobile & stationery installations. Meet Military specifications.
Cameron - Houston, TX
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer & distributor of riser systems including gimbals used to reduce shock & to evenly distribute loads on the spider & riser sections. Gimbals are equipped with six bearings, maximum angle of deflection is 5 degrees & has load rating to 850,000 lbs. Gimbal load rating can be adjusted to meet specific requirements by increasing the number of bearings.
Brand Names: Cameron
BEI Precision Systems & Space Div. - Maumelle, AR
Precision Optical Encoders Along With Rate & Position Servo Systems For The Military & Aerospace
MDC Vacuum Products, LLC - Hayward, CA
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified custom manufacturer of load-lock gimbals. Specifications of gimbals include 10 percent horizontal tilt, 1/8 in. axial displacement, minus 20 degrees C to plus 200 degrees C bakeup temperature, 25 lbs. maximum load rating & 2 lbs. weight. Features of gimbals include micrometer actuators with position lock, formed bellows seal, magnetic transporter extension kit, horizontal orientation, side to side parallel axis displacement, stainless steel formed bellows adapter & flange & anodized aluminum construction. Load-lock gimbals are suitable for alignment of magnetically coupled transporters used with circular & rectangular entry load-lock systems.
Mad Lab Industries - Naperville, IL
Manufacturer of gimbals. 2 and 3-axis gimbals.
Link Gear & Machine Company - Baltimore, MD Browse our capabilities profile
Custom Manufacturer, Service Company
Custom manufacturer of journal gimbals. Products such as gears, machine parts, sprockets, gear couplings & cams can also be fabricated. Materials used include steel, stainless steel, high carbon steel alloys, cast iron, bronze alloys, brass & aluminum. Capabilities include CNC machining, milling, turning, facing, profiling, drilling, tapping, reaming, counterboring, countersinking, pocketing, keyway broaching, threading & inspection. Secondary services include cylindrical grinding, surface grinding, honing, keyseating, assembly, heat treating & plating.
Airometric Systems Corp. - Glen Cove, NY
Service Company
Engineering, Design, Concept Development Services; Tracking Systems, Velocity/Position Servo Controls, Robotics, Simulators, Multi-Axis Gimbal Systems
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified September 2, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen