Xetex, Inc. - Minneapolis, MN
Manufacturer, Service Company
Manufacturer of heat recovery systems including heat exchangers. Various features include epoxy coated finish, aluminum flat plate construction, double wall cabinets, modular design, fiberglass insulation, stainless steel welded frames, DX coils, plenum blowers, isolators, gas-fired heaters, compressors, valves and axial fans, packaged, roof and indoor mounted design and energy recovery wheels. One year warranty.
www.xetexinc.com/heat_xchangers_units

Dry Coolers, Inc. - Oxford, MI
Manufacturer, Custom Manufacturer
ISO 9001: 2000 certified manufacturer of heat recovery systems including heat transfer equipment & heat treating equipment. Types include induced draft cooler, engine cooler, forced draft cooler, & custom designed fuel cell cooler. Cools by passing air over fluids in finned tubes. Maintains temperature to within 5 degrees F of dry bulb ambient. Applications include isolating oils from cooling water.
drycoolers.com/

Sigma Thermal - Marietta, GA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom heat recovery systems, energy recovery systems & waste heat economizers. Combustion air pre-heat systems & closed loop systems are available. Components of combustion air pre-heat systems include air to air heat exchangers, modified burners, combustion air ductwork & exhaust gas ductwork. Closed loop systems are used to capture waste energy & transfer to different users.
www.sigmathermal.com/waste-heat-recovery

Penn Separator Corp. - Brookville, PA
Manufacturer, Custom Manufacturer
Manufacturer of energy saving devices, exhaust heads, exhaust silencers, mist separators for steam, air & other gases venting to atmosphere. ASME certified welding shop.
www.pennseparator.com/pbs24.htm

Wisconsin Oven Corp. - East Troy, WI
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of heat recovery systems including ovens. Heat recovery systems are available in 23.5 ft. L x 12 ft. W x 12.5 ft. H overall dimension with 22 ft. L x 8 ft. W x 8 ft. H chamber, 20.0 hp recirculation blower power, 21,700 cfm recirculation blower pressure, 1,600,000 btu/hour heat capacity, 1,408 cu. ft. volume & 10,100 lbs. weight. Heat processing equipment is suitable for adhesive, composite, epoxy, powder & varnish curing, aging aluminum billet preheating, baking, finishing, heat treating, maintenance, hydrogen embrittlement relief, homogenizing & bonding applications.
www.wisoven.com/batch-ovens

Corbett Industries, Inc. - Waldwick, NJ
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of heat recovery systems, air to air heat recovery systems, waste heat recovery systems incinerators & waste heat recovery systems. Volatiles used as incinerator fuel to eliminate fumes for EPA compliance. Custom designed, horizontal configurations for low profile roof mount applications, vertical configurations for smaller footprint on ground installations & variable frequency drives & pressure controls.
www.corbettind.com/furn.html

Boilersupplies.com - Mc Donough, GA
Distributor, Custom Manufacturer
Distributor of boiler & heating supplies, relief, control, gate, globe, & solenoid valves. Liquid level gauges & glass. Boiler pumps, heat exchangers. Handhole & manhole gaskets. Burner controls. Blow down valves.
Brand Names: American Standard, Bell & Gossett, Old Dominion, Reco
www.boilersupplies.com/madden/heat-recovery...

Fin Tube Products, Inc. - Wadsworth, OH
Manufacturer, Custom Manufacturer
Custom manufacturer of miniature finned tubing for use in heat recovery systems. Miniature finned tubing is available in diameters from 1/4 in. to 0.015 in. with fin counts up to 142 fins per inch. Construction include helically wounded & soldered fins. Services include in-house atmospheric brazing, nickel chromium cladding & custom bending services.
fintube.rtrk.com/?scid=2922736&rl_alt=http%...

Schust Engineering, Inc. - Auburn, IN
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer & designer of heat recovery systems. Products include baghouses, air cleaning devices, VOC destruction systems, acid gas neutralization systems, cyclones, general industrial ventilation systems, air pollution control systems & dust collecting filters. Wet & dry scrubbers, cartridge dust & fabric collectors, activated carbon filtration systems & thermal oxidizers are also available. Meets AISC, ACGIH, AMCA, ANSI, MACT, NFPA, OSHA & SMACNA standards.
www.schustengineering.com/

Turnbull Specialties, Ltd. - Cowansville, QC
Manufacturer, Custom Manufacturer
Custom manufacturer & designer of heat recovery systems including heaters & coils. Heaters & coils can be designed & fabricated to custom specifications. Heaters are available in capacities ranging from 20,000 btu/hour to 3,000,000 btu/hour with TEFC motors, steel cores, steel spiral wound fins & steel or stainless steel fan blades. Steam, air, oil, glycol & hot or chilled water operated coils are thermal shock, freezing & water hammer resistant & are available with corrosion resistant steel & stainless steel cores, steel fins & minimum 14 ga. steel or stainless steel welded airtight casings.
www.turnbullcoils.com/index.html

Heat Exchange & Transfer, Inc. - Carnegie, PA
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of heat recovery systems. Types of systems include fuel oil heat transfer systems, thermal fluid vaporizers, water/glycol circulating transfer systems, cooling systems, thermal fluid heat transfer systems, temperature control loop systems, steam heated temperature control units, liquid circulating hot oil systems & hot oil system accessories. Heat recovery systems are available in standard & custom models for applications including jacketed vessels, rolls, mixers, dryers, platen presses, exchangers, tanks, molds, dies, extruders, ovens & heat tracing. Meets NEMA & ASME standards.
heat-inc.thomasnet.com/category/heat-transf...

ComEnCo Systems, Inc. - Davison, MI
Custom Manufacturer, Service Company
Custom manufacturer of fuel saving heat energy recovery systems in plate, tube & shell models. Heat recovery systems are welded with 304, 316 or 347 stainless steel & are available with 2,000 degrees F temperature. Heat recovery systems are used to avoid leakage or cross contamination. Various applications include electronics, foundry core molding, coating, soil remediation, wire enameling, food processing & automotive paint systems. NFPA, FM, CSA, UL, CE & AGA compliant.
www.comenco.com/heatrecoverysystems.html

Super Radiator Coils - Locations
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom heat transfer equipment including heat exchangers & coils. Features include fin material thickness range from 0.006 in. to 0.045 in. & tube material thickness range from 0.12 in. to 0.109 in. & fin spacing to resist dust & dirt build-up. Protective coatings include acrylic, lacquer & hot dip galvanizing. Fin enhancements include bead turbulators, spring turbulators & riffled tubing. Applications include chemical storage, electronics, pharmaceutical storage, clean rooms, exhausters & medical storage. Meet ASME, UL, CSA, ETL, SME, CRN & CE standards. JIT delivery.
www.srcoils.com/products.php

Berg Chilling Systems, Inc. - Oak Park, IL
Custom Manufacturer, Service Company
ISO 9001:2008 certified custom manufacturer of heat recovery systems including ice skating rinks. Specifications of heat recovery systems include 15 refrigeration tons to 300 refrigeration tons cooling capacities, 270 btu/hour to 846 btu/hour heating capacity, 460/575/230/380 V, 50/60 Hz power supply, 120 V single phase control voltage & 20 hp to 120 hp compressor. Heat recovery systems include liquid chiller circuits, microprocessor controllers, electrical panels, air & water chiller vessels, water cooled condenser, HFC refrigerants, suction & gas cooled motor, pumping stations & heavy gauge structured steel tube with welded construction frames. CSA certified. UL listed.
www.berg-group.com/HeatExchangers.htm

Doucette Industries, Inc. - York, PA
Manufacturer
ISO 9001:2008 certified manufacturer of energy management systems & waste heat energy recovery systems such as desuperheaters & liquid to liquid heat exchangers. Desuperheaters are available for air conditioning, chiller & heat pump systems from 5 tons to 200 tons. Heat recovery units are designed to heat domestic hot water up to plus 140 degrees F. Desuperheaters can be installed on all makes & designs of air conditioning units, heat pumps & liquid water chillers. Applications include restaurants, hotels, apartments, schools, hospitals, universities, government installations, office buildings & industrial processes.
heatexchangers.doucetteindustries.com/categ...

Heat Recovery Systems Products
	Aquefier Series Heat Recovery Units (1.5 to 5 tons) DC Series Chemically Cleanable Commerical Desuperheaters (5 to 100 tons) CADS Series Ammonia Desuperheaters (25 to 325 tons) More

Kerr Pump & Supply Co. - Oak Park, MI
Distributor, Manufacturer
ISO 9001:2000 certified manufacturer & distributor of computer designed skid mounted package systems like heat exchangers, pumps, blowers & vacuum equipment. Packages for cooling tower systems, chilled water systems, closed loop hot water generation systems, compressor cooling, induction cooling systems, blower systems for pressure & vacuum service, & heat exchanger cleaning are available. On-site repair & installation service of pumps also available. Industries served include automotive, manufacturing, & pharmaceuticals.
Brand Names: Alfa Laval, Thermal Transfer, Wheatley, Xchanger
pumps.kerrpump.com/category/all-categories

Heat Recovery Systems Products
	Spiral Heat Exchanger

Baelz North America - MARIETTA, GA
Distributor
Distributor of bellow seal control valves & actuators, both 2-way & 3-way, for leak-free long life in high temperature service such as thermal oil & other high temperature liquid applications. Also manufactures ejector valves & actuators that provide loop temperature control without secondary circulation pumps, both 3-way & 4-way, for hot water & steam control systems. Steam systems include condensate & blow down waste heat recovery packages. Also distributes complete temperature control & automation skid packages for all control valves & associated control systems.
www.baelzna.com

American Heating Co., Inc. - Clifton, NJ
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of heat recovery systems including heaters, coils, economizers & heat exchangers. Heat recovery systems are suitable for asphalt, bio-diesel, crude oil storage, oil refineries, chemical & food processing plants, chemical tank storage & barges & shipping vessels.
www.americanheatingco.com/index.html

Spiral Manufacturing Co., Inc. - Minneapolis, MN
Manufacturer, Custom Manufacturer
Manufacturer of heat recovery systems used extensively by installers of heating & ventilating duct to produce sheet metal assemblies.
www.spiralmfg.com/prod.htm

Berner International Corp. - Air Curtains/Air Doors - New Castle, PA
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of heat recovery systems. Heat recovery systems are suitable for plant, warehouse, factory, car wash, commercial & outdoor applications. Patio & door heaters are also available.
Brand Names: Berner
www.berner.com/all.php5?sec=products&top=2&...

AEC, Inc. - Schaumburg, IL
Manufacturer, Service Company
Manufacturer of heat recovery systems and equipment. A wide range of chilling, temperature control (heat/cool), reservoir pump tank equipment & systems for plastics and other processors are available. Products include pharmaceuticals heat exchangers, heat transfer equipment, heat transfer instrumentation and systems & heat treating equipment.
aec-central-chiller.aecinternet.com/

Munters Corporation - Dehumidification Division - Amesbury, MA
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified custom manufacturer of heat recovery systems. Heat recovery systems are available with economizer cooling options, bypass damper prevention & cycle option controls. Heat recovery systems are suitable for industrial & commercial applications.
www.munters.us/en/us/Products--Services/Deh...

Wellman Furnaces, Inc. - Shelbyville, IN
Manufacturer, Custom Manufacturer, Service Company
ISO 9000 certified custom manufacturer of heat processing equipment & heat recovery systems including roller hearth, vacuum, rotary hearth, mesh belt, radiant coil & bell furnaces. Roller hearth furnaces include direct-fired & atmosphere furnaces for temperatures to 2100 degrees F (1150 degrees C). Fuel-fired or electrically heated designs are available. These furnaces are suitable for lamination annealing, tube annealing & other processes like reheating molybdenum & tungsten sheets for rolling. Features a pulse-fired combustion system.
www.wellmanfurnaces.com/industrialfurnaces....

Kaeser Compressors, Inc. - Fredericksburg, VA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 and 14001:2004 certified. Custom manufacturer of heat recovery systems including air to air and air to water heat exchangers.
us.kaeser.com/Products_and_Solutions/Rotary...

Fulton - Pulaski, NY
Manufacturer
Manufacturer of auxiliary steam equipment including heat recovery systems. Applications include controlling quality, pressure, storage capacity & enthalpy (heat content or temperature) of steam. Custom designed skid mounted heat recovery systems are also available.
www.fulton.com/products/ancillary-equipment...