ThomasNet.com

Instrumentation Amplifiers

Home > Supplier Discovery > Supplier Results for Instrumentation Amplifiers




Provide Feedback

Instrumentation Amplifiers Suppliers

Displaying 1 to 25 out of 44 results
to Compare Suppliers or Email
Advertisement
Advertisement
Advertisement
Alligator Technologies - Costa Mesa, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of USB controlled instrumentation amplifiers & signal conditioning for data acquisition systems. Instrumentation amplifiers are programmable in gain steps from 1 to 1000 & available as small conveniently packaged and powered units or as OEM subsystems for use in test and measurement systems. Control software and API are included. Welcomes design requests from OEM subsystem customers with custom requirements. Welcomes design requests from OEM subsystem customers with custom requirements.
www.alligatortech.com
Mini-Circuits - Brooklyn, NY Browse our catalog of products
Manufacturer, Custom Manufacturer
Hundreds of Amplifiers ready to ship, DC-21 GHz, including MMIC's, flat gain, dual matched, low noise, high dynamic range, broadband, or high power (up to 100W) models. Find exactly what you need with a Yoni live test data search, including hundreds more custom products. All prematched to 50 Ohms, as small as 0.12 in. square, with detailed data & performance curves. Certified ISO 9001, RHoS & environmental compliance ISO 14001, & aerospace AS 9100 certified.
www.minicircuits.com/products/Amplifiers.sh...
RDP Electrosense, Inc. - Pottstown, PA
Manufacturer, Custom Manufacturer
Custom manufacturer of instrumentation amplifiers. Amplifiers are available in various models with 12 V to 36 V supply voltage, 5 kHz transducer excitation, plus/minus 4 V to plus/minus 10 V output voltage, 0.007 to 500 amplifier grain range, 30 mV to 4,000 mV signal input range, plus/minus 0.1 percent linearity error, 0 Hz to 500 Hz output ripple, plus/minus 130 k ohms input impedance, plus/minus 5 V approximate zero adjustment range, 14 degrees F to 140 degrees F operating temperature, 0.12 in. to 0.26 in. cable gland cable sizes & 9.2 oz. to 64 oz. weight.
www.rdpe.com/us/men-ele.htm
T & C Power Conversion, Inc. - Rochester, NY
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom control & instrument or instrumentation amplifiers. Specifications vary upon models & include 50 W to 4,000 W power, 10 kHz to 20 MHz operating frequency, 100 VAC to 240 VAC voltage, 50/60 Hz power supply, 3 A to 15 A current, 8.25 in. x 5.25 in. x 12.8 in. to 36.5 in. x 21 in. x 20.5 in. dimension, 80% humidity & ambient temperature up to 40 degrees C. Various features include front panel meter displays, reverse & load power, graphic user interface (GUI) software, process presets, analog & digital interfaces, step up transformers, optional rack mount brackets & CE certified universal power supplies. Applications include medical, industrial & laboratory.
www.tcpowerconversion.com/pages/all
Advanced Test Equipment Rentals - San Diego, CA
Distributor, Service Company
ISO 9001:2008 and HUBZone certified. Distributor of instrument and instrumentation control amplifiers. Various features include interference filters, current meters, auto over temperature, external interlock circuitry, digital display monitors and broad bandwidth. Rental services available. Meets IEC standards.
www.atecorp.com/category/amplifiers.aspx
Mod-Tronic Instruments Limited - Brampton, ON
Distributor, Manufacturers' Rep
Distributor of instrumentation amplifiers. Available with zero and span adjustments. Stock items available. Most products are made in USA.
Brand Names: Absolute Process Instruments, Sineax
www.mod-tronic.com/API_CB_signal_conditione...
Capacitec, Inc. - Ayer, MA
Custom Manufacturer
Custom manufacturer of amplifiers for instrumentation & OEM applications. Specifications of amplifiers include plus/minus 15 VDC power supply & 1 percent linearity. Sensor probes, electronic racks & clock driver cards are also available. CE approved.
www.capacitec.com/Products/Displacement-Sen...
Meggitt Sensing Systems - Wilcoxon Research - Germantown, MD
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000 & ISO 14001:2004 certified manufacturer of standard & custom instrumentation & control amplifiers. Available as seismic accelerometer & power amplifier system & ultra-quiet, ultra low frequency seismic accelerometer. Seismic accelerometer & power amplifier system are available in 149 degrees F maximum temperature & ultra-quiet, ultra low frequency seismic accelerometers in 10 V/g sensitivity, +/-10% tolerance, 0.05 Hz low frequency & 0.5 kHz high frequency.
www.wilcoxon.com/vi_index.cfm
Pacific Instruments Inc. - Concord, CA
Manufacturer, Service Company
Manufacturer of wideband differential instrumentation amplifiers. Specifications include 115/230 VAC, 100 mA and 47 Hz to 400 Hz power supply, 100 kHz bandwidth, 300 V common mode, 50 megohms input impedance and +/-10% accuracy. Various features include 2 or 6-pole selectable filters, voltage substitution calibration, dual floating outputs, variable gain multipliers, switch selectable, low pass filters and rear mounted connector panels. Amplifiers are used for data acquisition, analog recording, line and galvanometer driving, data filtering and signal isolation. One year warranty.
www.pacificinstruments.com/Products/Signal%...
Pentek Inc. - Digital Signal Processing - Upper Saddle River, NJ Browse our catalog of products
Manufacturer
Manufacturer of amplifiers for instrumentation applications. Types of amplifiers include system synchronization and distribution amplifiers, high-speed system synchronization and distribution amplifiers and clock synchronization and distribution amplifiers. Available in different form factors such as PCIe, 3U/6U cPCI, PMC/XMC, AMC and 3U VPX and in various configuration models.
www.pentek.com/products/ProductsBy.cfm
PCB Piezotronics, Inc. - Depew, NY
Distributor, Manufacturer, Custom Manufacturer
Full supply of prepolarized condenser microphones and preamplifiers. Powered by a 2-20 mA signal conditioner and standard coaxial cables. The prepolarized designs can also be used with the same constant current source used for ICP® accelerometers, thereby minimizing set-up time. IEC 61094 compliant prepolarized condenser microphones are built around the ICP® sensor technology. Also offers the traditional externally polarized microphones that run off of a 200V power supply.
Exloc Instruments, Inc. - Warrenton, VA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer & designers of amplifiers including DC amplifiers, instrument & control amplifiers, instrumentation amplifiers, & isolation amplifiers. Types include trip amplifiers used with isolating barriers. Approved for use in classified hazardous locations involving flammable atmospheres.
Powertron - Port Washington, NY
Manufacturer, Custom Manufacturer
Instrumentation amplifiers. Power Amplifiers. Output power: 100W to 3000W. Output Volts: 0-22.5V rms into optional output. Transformers up to 6000V rms. Output Frequency: 10 Hz - 4.5 MHz.
Honeywell Sensing and Control - Test & Measurement Sensors - Columbus, OH
Manufacturer
ISO 9001, TS 16949, AS 9100 & Six Sigma certified custom manufacturer of instruments including in-line amplifiers with plastic cases. In-line amplifiers are available in various models with specifications including 60 mA to 90 mA current draw, 13.5 VDC to 36 VDC supply voltage & minus 5 degrees F to plus 200 degrees F operating temperature. In-line amplifiers are used with strain gauge & piezoelectric transducers.
Steven Engineering - South San Francisco, CA
Distributor, Custom Manufacturer
Distributor of industrial process components including amplifiers used in instrumentation & instrument control applications. Types include PNP amplifiers, ISO amplifiers, tuning amplifiers, modular amplifiers, remote setting amplifiers, PNP amplifiers with cable power tuning, amplifiers, on/off amplifiers, 2 channel amplifiers, speaker amplifiers, ultrasonic sensor swing amplifiers & signal detection amplifiers. Amplifiers are available in different styles, sizes & configurations. Same day shipment & JIT delivery available.
Brand Names: Crouzet, Federal Signal, ISSC, Skan-A-Matic, Square D
Linear Technology Corp. - Milpitas, CA
Manufacturer
Manufacturer of integrated circuits.
Communication Power Corp. - Brentwood, NY
Manufacturer, Service Company
Linear High Power Amplifiers; Combiners: In Phase, Quadrature, Broadband. Frequency: 500 KHz - 2.5 GHz. Applications: Broadcast Communications Systems, EW/ECM Systems, TWT Replacements, RFI/EMI Testing, NMR Spectroscopy, Industrial Heating, Ultrasonic Systems, MR Imaging
C-Wave - Redondo Beach, CA
Manufacturers' Rep
Manufacturers Rep. for electronic test & components.
Brand Names: CPI
ACT/Techkor - Middletown, PA
Distributor, Manufacturer, Custom Manufacturer
Manufacturer Of Precision Signal Conditioning & Measurement Products
Vectronics - Starkville, MS
Distributor, Manufacturer, Custom Manufacturer
Complete Electronic Contract Manufacturing Services, Engineering Assistance, Standard & Custom Electronic Enclosures, Wiring Harness, Wiring, PC Boards, Surface Mounting, Thru-Hole Assembly, Components Assembly & Wiring, Testing, Packaging
Optimal Engineering Systems, Inc. - Van Nuys, CA
Manufacturer
Manufacturer of analog signal conditioners configurable as differential line receiver & driver, & instrumentation amplifiers. Analog signal conditioners are also configurable as adjustable gain & offset amplifiers, first & second degree active low pass, & differential & common mode noise rejection filters, & integrators. Analog signal conditioner card features include four independent channels, LED power indicators, spare pins installed on connectors, components placed on the pin sockets, size dimensions of 5.625 in. x 5.000 in., & footprint compatibility with embedded controller & data acquisition cards.
Analog Digital Technology, Inc/dba: ADTECH - Pittsford, NY
Manufacturer
Instrumentation, Isolation Amplifiers, Signal Converters/Temperature Transmitters, Alarms
American Microsemiconductor, Inc. - Madison, NJ
Distributor, Manufacturer, Service Company
Manufacturer of instrumentation amplifiers. Types include precision, low power & low distortion instrumentation amplifiers. Specifications of amplifiers vary depending upon models & include 12 microampere to 100 picoampere maximum bias current, 650 mW to 1.5 W maximum power, 8 to 16 pins & maximum operating temperature up to 85 degrees C. JIT delivery. Same day shipping.
Interface, Inc. - Scottsdale, AZ
Manufacturer, Custom Manufacturer
Custom manufacturer of instrumentation amplifiers including amplified load cells. Amplified load cells are available with 4 mA to 20 mA current & plus/minus 10 V voltage, 200 Hz bandwidth, 15 degrees F to 115 degrees F temperature, minus 20 degrees F to plus 185 degrees F operating temperature, 11 VDC to 28 VDC supply voltage, plus/minus 10 span adjustment, 5,000 megaohms insulation resistance, plus/minus 0.25 in. eccentric & side load sensitivity & minus 10 degrees C to plus 45 degrees C compensated temperature. Amplified load cells are suitable for automotive, medical, oil, aerospace & material testing industries.
Mini-Circuits Distribution Center - Branson, MO
Manufacturer
Hundreds of Amplifiers ready to ship, DC-20 GHz, including MMIC's, flat gain, dual matched, low noise, high dynamic range, broadband, or high power (up to 100W) models. Find exactly what you need with a Yoni live test data search, including hundreds more custom products. All prematched to 50 Ohms, as small as 0.12 in. square, with detailed data & performance curves. Certified ISO 9001, RHoS & environmental compliance ISO 14001, & aerospace AS 9100 certified.
to Compare Suppliers or Email
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified April 18, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen