Environmental Simulation Laboratories

Home > Supplier Discovery > Supplier Results for Environmental Simulation Laboratories

Provide Feedback

Environmental Simulation Laboratories Suppliers

Displaying 1 to 21 out of 21 results
to Compare Suppliers or Email
Consolidated Laboratories, Inc. - Covina, CA
Service Company
ISO 10012-1, ANCI/NCSL Z540-1-1994, & MIL-I- 45208 certified environmental silmulation testing laboratories for both commercial & aerospace customers. Types of tests include performing dynamics such as vibration & shock testing, pneumatic testing, hydraulic tests such as pressure & flow testing, & environmental chamber testing. Other vibration testing capabilities include sine, random, sine on random, resonance search, & fixture evaluation. Shock testing capabilities include classic half-sine & sawtooth waveforms, bench handling, crash safety, hi impact, & random drop testing services. Other testing services include acceleration, altitude, burst pressure, contact resistance, contaminated fuel, dielectric withstanding voltage, electrical/electronic evaluation, ESS testing, explosive atmosphere, fluid resistance, helium leakage, high temperature, humidity, icing, insulation resistance, life, low temperature, pressure cycling, pressure drop, proof pressure, rain, salt spray (fog), sand & dust, temperature cycling, temperature-altitude, terminal strength, thermal shock, voltage drop, washdown, & waterproof testing. Other services include fixture design & assistance in test procedure writing, as well as interpreting conflicting governing specifications.
Wyle - El Segundo, CA
Distributor, Service Company
ISO 9001:2000, ISO 9001:2008 environmental qualification testing laboratories. seismic, LOCA and HELB testing available, including thermal and radiation aging, functional monitoring, modal analysis and testing, and fixture design and fabrication. Utilizes triaxial, long stroke and biaxial high force seismic simulators.
IMR Test Labs - Lansing, NY
Service Company
Cyclic corrosion labs offering a wide range of environmental simulation testing services to specifications including ASTM, AA, DBL, DIN, Ford, GM/GMW, GS, HES, ISO, MIL, SAE, TL and VDA specifications. Accredited by Nadcap & A2LA, as well as a wide range of OEMs. Testing offered includes: salt spray/fog, temperature & humidity, water fog, cyclic corrosion, CASS, SO2 or CO2/SO2 exposure, taber abrasion, chip resistance, tape adhesion, peel testing, QUV/UV exposures and electrical resistitivity testing.
Cascade TEK - Locations Browse our catalog of products
Manufacturer, Custom Manufacturer, Service Company
A2LA Accredited for environmental simulation laboratories. Locations in Oregon and Colorado. Performing a wide variety of tests to include vibration, shock, thermal shock, salt-fog, altitude, temp/humidity, sand & dust testing, IP/NEMA Ingress protection & UV exposure. ISTA Certified for package testing: compression, transportation simulation, drop, transportation simulation, bouce, pallet temp/humidity conditioning and icline impact.
Cincinnati Sub-Zero Products, Inc. - Locations
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard and custom-designed environmental/ climatic test chambers including: benchtop, reach-in, walk-in & drive-in test chambers, industrial freezers, laboratory & medical equipment. Environmental test chambers include temperature, humidity, vibration, stability, altitude, HALT/HASS, sand & dust, and thermal shock chambers. Industrial freezing systems include ultra low industrial freezers, refrigeration, cold rooms, controls & software. Services include test chambers maintenance programs, control upgrades, refrigeration retrofits, test chamber calibration, start-up & training, replacement parts & repair services. Medical division manufactures patient temperature management systems, therapeutic cold & heat therapy units, cold spray units, warming & cooling blankets, cooling vests, cardiovascular cooling & heating systems & hypothermia treatment systems. Test Services division is an A2LA accredited test laboratory providing environmental testing services including temperature, humidity, vibration, thermal shock, HALT & HASS, altitude & corrosion testing. ISO/IEC 17025 compliant.
Climatic Testing Systems, Inc. - Warminster, PA
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of environmental simulation laboratories including drive-in vehicle test chambers. Drive-in vehicle test chambers such as vehicle performance test chambers, vehicle soak chambers, vehicle emissions test chambers, 4-post chambers, noise and vibration test chambers and corrosion test chambers are available. Drive-in chambers are available with real-time testing software. Drive-in chambers feature multi-screw compressor package with economizer, bypass circulation air flow and automatic exhaust extraction pressure control. Capabilities include designing, installation, maintenance and turnkey manufacturing
Datasyst Engineering & Testing Services - Delafield, WI
Service Company
A2LA & ISO 17025 certified testing laboratory, providing manufacturers product testing & development for mechanical & electrical assemblies & components. Vibration testing, shock testing, strain & stress testing, load and fatigue testing, environmental testing, seismic testing, mechanical testing & green technologies testing.
Tandex Test Labs, Inc. - Irwindale, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 & AS9100-B certified environmental simulation research & testing laboratories. Capabilities include forming, marking, analysis, screening, inspection, assembly, evaluation, packaging, bonding, sealing, trimming & verification. Suitable for military, biomedical, defense, aerospace, commercial, medical & industrial applications. ITAR registered.
Environ Laboratories, LLC - Minneapolis, MN
Service Company
Environmental laboratory simulation, EMI, EMC, HALT, HAST, environmental tests: temperature, humidity, altitude, rain, freezing rain, salt fog, salt spray, fatigue, solar, fungus, tensile, explosive atmosphere, sand, dust, hydraulics, pneumatics, FAA fire, flammability, chemical & fluid susceptibility tests, MIL STD 461, MIL STD 810, RTCA/DO160, ISO 17025, Rolls-Royce accreditation.
L-3 Communications Cincinnati Electronics - Mason, OH
Manufacturer, Service Company
Laboratories for environmental simulation testing services. Testing capabilities include climatic testing, environmental test screening, vibration & shock testing.
Donaldson, Garrett & Associates, Inc. - Macon, GA
Service Company
Environmental site assessment & sampling. Phase 1 environmental site assessments for commercial, industrial or large land parcel transactions, wetland delineation. Sampling services include gathering surface soil, surface water, sediment & soil gas samples, groundwater level monitoring, sampling of existing wells & borings.
Clark Testing Group - Jefferson Hills, PA
Custom Manufacturer, Service Company
ISO 9001:2000, ISO 9002 & ISO/IEC 17025:2005 certified worldwide environmental simulation & stress screening laboratories. Capacity includes ability to test equipment at a wide range of temperatures & humidity levels to comply with equipment specifications including IEEE & most commercial/military standards, & environmental chambers with a wide range of dimensions to handle a variety of equipment sizes. Capacities also include state-of-the-art recording equipment that can monitor tests with long duration periods. Applications include use in light & heavy industries, refineries, power industry, aluminum, steel & environmental consulting firms.
Element Materials Technology - Saint Paul, MN
Service Company
ISO 9001:2008, ISO/IEC 17025:2005 & ISO/IEC 17020 certified, A2LA & NADCAP accredited environmental simulation laboratories. Materials handled include metals, alloys & nonmetals. Climatics & environmental simulation services are available. Capabilities include accelerated weathering testing, altitude testing & simulation, flame, fire & flammability testing, hail impact testing, HALT/HASS testing, humidity testing, salt fog & salt spray testing, space simulation & temperature & thermal testing are available.
Erickson Industries, Inc. - River Falls, WI
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom laboratories for environmental simulation, research & testing. Industries served include pharmaceutical companies, university research laboratories & government installations. Spray on plastic coating services also available. Meet UL, FM, US, NSA, UDA & CSA specifications.
ATL Of South Florida - Fort Lauderdale, FL
Service Company
ISO/IEC 17205: 2005 certified testing services. Products tested include curtain walls, windows, skylights, doors, shutters, wind abatement systems, garage doors, wall systems, balcony rails, louvers, roof mounted equipment and enclosures, roof tile and roof assemblies/.
Anderson Laboratories, Inc. - Greendale, WI
Service Company
A2LA accredited ISO/IEC 17025:2005 certified environmental simulation laboratories. Environmental simulation testing capabilities include CASS testing, crevice corrosion evaluation, fog testing, humidity testing, rubber deterioration testing, salt spray testing & temperature cycling. Highly accelerated humidity stress testing (HAHST), highly accelerated life testing (HALT) & highly accelerated stress screening (HASS) services are available. Tests for analyzing abrasion, corrosion, durability, performance, reliability, strain, stress & wear in different products can be performed.
Global Testing Services, Inc. - Kokomo, IN
Custom Manufacturer, Service Company
ISO 17025 accredited test lab performing a full scope of qualification screening & testing.
Cincinnati Sub Zero Testing Division - Sterling Heights, MI
Manufacturer, Custom Manufacturer, Service Company
Environmental test laboratory offering a variety of simulation services. Services include vibration, shock, temperature cycling, humidity, altitude, climatic, and corrosion testing, as well as environmental stress screening.
Applied Consumer Services, Inc. - Hialeah Gardens, FL
Service Company
Research, testing, experimental & environmental simulation laboratories. Laboratory services, product development, formulation/deformulation & food analysis services are available. Capabilities include thin layer chromatography, gas chromatography/flame ionization detection, mass spectroscopy, distillation & rotary evaporator concentration, infrared/ultraviolet/visible spectroscopy, atomic absorption spectroscopy, energy dispersion spectroscopy & X-ray diffraction. Testing services such as air quality testing, material testing, consumer product testing, flammability testing, shelf-life testing, textile/carpet testing, forensic investigation testing & herbal product testing are available. Laboratory certifications include USP, ACSI, GLP, DEA & FDA. ISO 9001:2000 compliant.
GASL, Inc. - Ronkonkoma, NY
Custom Manufacturer, Service Company
Services in combustion testing & materials testing, turbine burner development, including hypersonic applications, commercial & alternative energy, MEMS development, prototype manufacturing & flight test vehicles. ISO 9001:2000 AS 9100 registered R&D, engineering,
Servicor Cleanrooms - Tualatin, OR
Manufacturer, Custom Manufacturer
Modular, Movable Cleanrooms For Ultra-Clean Laboratory Applications. Expandable, Relocatable Configurations. Advanced Designs For Efficient Use & Process Flexibility. Leasing Available. Also Manufacturing Clean Air Mini-Environments, Laminar Flow Workstations & Wall Systems. Manufacturer Of Custom Access Strip Systems, Plastic Curtains & Panels
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified August 22, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen