Wilks Enterprise, Inc. - East Norwalk, CT
Distributor, Manufacturer
Manufacturer of easy-to-use portable infrared analyzers for on-site measurement of fats, oil and grease in water, wastewater, and soil. Used worldwide to analyze produced water on oil platforms, monitor industrial wastewater effluents, measure FOG discharge levels, and soil remediation site clean-ups.
www.wilksir.com/oilgrease-analyzers

Arjay Engineering Ltd. - Oakville, ON
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified custom manufacturer & designer of oil-in-water monitors & analyzers. Features include 316 stainless steel housings for harsh environment, non contacting optics, UV absorbing flow plate to sheen the water over a large surface area & warning alarm for impending lamp replacement. Specifications include operating temperature range from 10 degrees C to 50 degrees C & power input of 24 VDC or 110 VAC or 220 VAC. Capabilities include measuring the concentration (in parts per million or percentage) of petroleum oil dissolved or emulsified oil in water & reading the water 50 times per second with an averaged display update every one second. Multi point calibration is also available to customize response curves. Meet UL, CSA & CE standards.
www.arjayeng.com/arjayeng_oil_and_water.htm

Inventive Systems, Inc. - Lexington Park, MD
Manufacturer
Manufacturer of detectors including oil-in-water monitors. Specifications of oil-in-water monitors include maximum operating fluid temperature of 116 degrees C, 115 VAC to 220 VAC & 50 Hz to 60 Hz power supply, 10 A 220 VAC alarm output, 0 psi to 50 psi pressure, 2 ppm to 550 ppm measuring range, plus/minus 2 ppm to plus/minus 100 ppm accuracy & repeatability, & 10 seconds to 30 seconds, adjustable alarm delay. Materials include stainless steel, bronze, & aluminum.
oilalarm.oilinwater.org/category/oil-in-wat...

Oil-In-Water Analyzers Products
	Oil in Water Monitor Oil in Water Monitor - Weather Proof Oil in Water Monitor - Explosion Proof

Buck Scientific, Inc. - East Norwalk, CT
Manufacturer
Manufacturer of hydrocarbon infrared analyzers & detectors for analyzing petroleum hydrocarbons in oil-in-water, soil & sludge samples. Specifications of analyzers include 14 in. W x 11 in. D x 10 in. H dimensions, wavelength fixed at 3.42 microns with 0.04 microns bandwidth & 115/230 VAC, 50/60 Hz & 80 W power supply. Features of analyzers include digital readouts in concentration mode, accommodating 10 mm, 50 mm or 100 mm quartz cells to 1 ppm or lower detection levels, built-in scale, peltier cooled detectors & optional output recorders.
www.bucksci.com/atomic-absorption-spectroph...

Horiba Instruments, Inc. - Irvine, CA
Manufacturer
Worldwide manufacturer of oil content analyzers & oil-in-water analyzers. Fully automated & standard style analyzers are available.
www.horiba.com/us/en/application/material-p...

JM Canty, Ltd - Buffalo, NY
Manufacturer, Service Company
Manufactures lab & online particle analysis. Image analysis system gives a 2-dimensional analysis of size & color to allow for detailed analysis.

Algae-X International - Fort Myers, FL
Manufacturer
Custom manufacturer of filtration controllers including oil-in-water analyzers for fuel conditioning systems. Analyzers are available with flow rates ranging from 150 gph to 5,160 gph. Features include remote monitoring, signal alarm functions & control of filtration systems with multiple tanks.
Brand Names: Algae-X

Analytical Systems Int'l. KECO R&D - Houston, TX
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of continuous online oil-in-water analyzers. Features include quantitative measurement of ppb w ppm w through saturation levels. Features include patented Sample Transfer Stripped S.T.S. (membrane technology) which provides an ultra dry & clean sample to the analyzer insuring greatly reduced maintenance requirements, push button liquid validation, LCD display, continuous analysis & RS 232/485 communications.

Koehler Instrument Co., Inc. - Bohemia, NY
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of oil-in-water analyzers including demulsibility baths. Features microprocessor digital temperature control with LED display & bath medium of 9 gal. (38.5 L) water. Specifications include maximum temperature of 212 degrees F (100 degrees C), voltage ratings up to 240 V & frequencies of 50 Hz./60 Hz. Services include testing services, calibration, documentation, training, preventive instrument maintenance & emergency repair. Meets ASTM D2711 & DIN 51353 standards. Products made in the USA.

Micromeritics Instruments Corp. - Norcross, GA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000 certified custom manufacturer of analyzers & analyzer systems. Analyzers are available for evaluation of porosity, material density, surface area & particle size. Analyzers are suitable for pharmaceuticals, cosmetics, paints, pigments, food products, high-tech ceramics, textiles, geological materials & polymers. Meets CE & ASTM standards.

Peak Process Controls - Newmarket, ON
Manufacturer, Manufacturers' Rep
Manufacturers rep. of oil-in-water analyzers. Oil-in-water analyzers feature closed & non-contact flow cell. Oil-in-water analyzers are suitable for offshore oil platforms & FPSO vessels, bilge montioring on board ships, cooling water, boiler condensate, cooling, storm & process waters.
Brand Names: Sigrist

Arm-Tex Corp. - Waco, TX
Distributor, Custom Manufacturer
Distributor of oil-in-water analyzers.
Brand Names: Civacon

Electrowave USA - Houston, TX
Manufacturer
Monitoring & Control Systems For The Oil & Gas Industries

A2 Technologies, LLC - Danbury, CT
Manufacturer
Manufacturer of oil-in-water analyzers. Specifications of analyzers vary depending upon models & include interchangeable external reflectance & single-reflection diamond ATR sampling heads, interferometer with 4 cm-1 maximum resolution, 4000 cm-1 to 650 cm-1 frequency range, 95% non-condensing humidity, external computer display, -10 degrees C to +50 degrees C temperature range, 10 minutes warm up time, 2 minutes response time & 100/120/240 VAC, 50/60 Hz power supply. Sample types include polymers, oils, gels, grease, pastes, dairy, acids, gasoline, diesel, liquids, wine, foodstuffs, powders, solids & soil. Various applications include turbine oil, hydraulic fluid, gear & crank case oil, fuel, food adulteration, soil analysis, QA/QC, petrochemical blending, regulatory compliance & recycling. ISO compliant.
Brand Names: Flexscan, ML, PAL