Mocon - Minneapolis, MN
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of oxygen analyzers. Specifications of analyzers include 19 in. W x 14.25 in. D x 5.25 in. H dimension, 1/4 in. tube fitting connections, 32 degrees F to 104 degrees F operating temperature, 0 to 95 percent operating humidity, 90 to 230 VAC, 50 to 60 Hz power supply, response time up to 5 seconds, plus/minus 1 percent drift & full scale repeatability, 3.4 in. x 4.5 in. graphical displays, one programmable 4 mA to 20 mA analog output & measuring range up to 20,000 ppm. Features include FID detectors, automatic calibration intervals, programmable relays & electronic backpressure regulators, internal multipoint option & multilevel concentration & fault alarms.
Brand Names: Mocon
www.mocon.com/headspace.php#02

Michell Instruments, Inc. - Rowley, MA
Manufacturer
Manufacturer of sensors, instruments & analyzers for the measurement of oxygen at both trace (ppm) levels & percentage oxygen concentrations, well suited for both clean environments as well as harsh & hostile applications. Products are based on the special MSRS zirconium oxide technology & thermo paramagnetic oxygen sensor.
catalog.michell.com/category/oxygen-analyze...

Oxygen Analyzers Products
	XTP600 Series Oxygen Analyzers XZR500 Series Oxygen Analyzers XZR400TS Touch-Screen Oxygen Analyzers

EdgeTech - Marlborough, MA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of standard & custom oxygen analyzers. Products include oxygen transmitters, explosion-proof oxygen transmitters, oxygen sampling systems, portable oxygen transmitters, loop powered two wire oxygen transmitters & oxygen/dew point analyzers. Oxygen analyzers can measure oxygen in trace & percentage levels. Available in different configurations. Products are NIST traceable & ANSI/NCSL Z540-1 compliant.
Brand Names: EdgeTech
www.edgetech.com/moisture-humidity/gallery/...

Oxigraf, Inc. - Mountain View, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 13485 certified manufacturer of analyzers for measuring oxygen up to 100 percent . Oxygen analyzers respond in less than one second. Oxygen analyzers are available in various models with specifications including -10 degrees C to plus 50 degrees C operating temperature, -20 degrees C to plus 60 degrees C storage temperature, -10 degrees C to plus 50 degrees C gas inlet temperature, 70 kPa to 115 kPa cell pressure, 5 minutes warm-up time for full accuracy, non-condensing humidity up to 95 percent, plus /-0.2 percent & plus /-0.5 percent accuracy, plus /-0.1 percent & plus /-0.03 percent short term stability, plus /-0.2 percent cross sensitivity, 0.6 VDC & 2.5 A sensor power supply, 4 mA to 20 mA analog output, 95 VAC to 250 VAC input voltage & 47 Hz to 63 Hz external power supply. Features include laser diode oxygen sensor, gas sampling pump, pressure sensor, flow controller, LED display, touch panel controls for alarm, flow & calibration functions, keypads & analog & digital RS-232 outputs. Oxygen analyzers are available with regulators, valves, batteries & carrying case. FDA approved.
oxigraf.thomasnet.com/viewitems/oxygen-anal...

Oxygen Analyzers Products
	Aerospace Oxygen Analyzers Tabletop Oxygen Analyzers NEMA 4X Oxygen Analyzers

ENMET Corporation - Ann Arbor, MI
Manufacturer, Service Company
Manufacturer of oxygen analyzers. Types of analyzers include portable gas detectors, personal gas detectors, multi-gas portable detectors, 4-gas portable detectors, sensors/transmitters, explosion-proof sensor/transmitters &1-3 channel oxygen monitors. Single point hazardous gas monitors/alarms, gas sampling monitors, process compressed air lines monitors, wet well monitors, respiratory air line monitors & multi-sensor transportable analyzers are available. Specifications of portable gas detectors with integral pumps include detection ranges from 0.9 ppm to 1000 ppm. Analyzers can be customized as per specifications.
Brand Names: Mark II, Matrix, ProAir, RECON, SPECTRUM
catalog.enmet.com/category/all-categories

Oxygen Analyzers Products
	RECON/4 - Multi Gas Portable Detector for CO, H2S, O2 and LEL AM-5175 Single Point Hazardous Gas Monitor/Alarm for Ambient Air GSM-60 Gas Sampling Monitor with Internal Pump and Sensors More

AMETEK Process Instruments - Pittsburgh, PA
Manufacturer
ISO 9001:2008 certified manufacturer of oxygen analyzers for non-combustion applications & oxygen & carbon monoxide analyzers for flue gas conditioning systems. Oxygen analyzers for non-combustion applications include analyzers for inert gas analyzers & analyzers for semiconductor thermal processing. Oxygen & carbon monoxide analyzers include stack mount transmitters & zirconium oxide self-contained analyzers. Services include systems integration, web enabled remote services & site survey analysis. Training services include product operation & maintenance training. 24 hour phone support & 24 hour on-site support for emergency services are also available.
Brand Names: ASOMA, Chandler Engineering, Dycor, Process Instruments, Thermox, Trace Analytical, Western Research
www.ametekpi.com/brands/thermox.aspx

Nova Analytical Systems, Inc. - Niagara Falls, NY
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of wall mounted continuous process & portable analyzers including oxygen indicators. Various analyzers operate on 115/220 VAC & 50/60 Hz power supply & have 4 mA to 20 mA current output. Panel mounted analyzers are available with 5 seconds to 8 seconds response time, corrosion-resistant NEMA 4, 4X, 7 & 12 enclosures, control cabinet, open slides, weather resistant & suitcase cabinets, microprocessor control, built in sample pump or pressure regulator, sensors, modular layout & stainless steel probes.
Brand Names: Nova
novagas.rtrk.com/?scid=2763697&rl_alt=http%...

Oxygen Analyzers Products
	Oxygen Analyzers (O2) Portable Analyzer for PPM Oxygen and Dew Point - 3255 Multigas Analyzers More

AMETEK Thermox/Land - Pittsburgh, PA
Manufacturer
ISO 9001:2008 certified manufacturer of oxygen analyzers for non-combustion applications & oxygen & carbon monoxide analyzers for flue gas conditioning systems. Oxygen analyzers for non-combustion applications include analyzers for inert gas analyzers & analyzers for semiconductor thermal processing. Oxygen & carbon monoxide analyzers include stack mount transmitters & zirconium oxide self-contained analyzers. Services include systems integration, web enabled remote services & site survey analysis. Training services include product operation & maintenance training. 24 hour phone support & 24 hour on-site support for emergency services are also available.
Brand Names: Thermox
www.ametekpi.com/applications.aspx

Nyad, Inc. - Concord, CA
Manufacturer, Service Company
Manufacturer of percent oxygen analyzers & monitors. Types of oxygen analyzers include OEM, NEMA 4 & 7X rated & rack & panel mounted analyzers. Specifications include response time less than 15 seconds, -4 degrees F to +113 degrees F operating temperature & 100 cc/minute to 250 cc/minute sample flow. Various features include microprocessor based controllers, dual adjustment alarm contacts, electrochemical sensors, four-digit LCD displays & non-volatile data memory. Oxygen analyzers are suitable for medical, chemical processing, aerospace, semiconductor & heat treating applications. Five year warranty.
catalog.nyad.com/product/all-categories/ser...

Oxygen Analyzers Products
	Series 200PN Percent Oxygen Analyzers

Quantek Instruments - Grafton, MA
Manufacturer
Manufacturer of benchtop & handheld battery-operated, portable oxygen analyzers used for the measurement of residual oxygen in gas-flushed (CAP/MAP) food packages. Food applications such as meats, fresh produce, pasta, nuts, snack foods, dairy products and coffee. Can also be used for applications where the oxygen level is very high (50 to 100%), without overloading the sensor. It is unaffected by trace hydrocarbons or high levels of CO2, which can poison other types of sensors. Range--0.1 to 100% oxygen.
www.quantekinstruments.com/category/product...

MSC Industrial Supply Co. - Melville, NY
Distributor, Custom Manufacturer
Supplier of 450,000 products from 2,500 mfrs.: cutting/machine/hand/power tools, MRO supplies, abrasives, fasteners, precision instruments, machinery, electrical supplies, safety equipment, HVAC, welding, hose, tubing, fittings, material handling, pumps, power transmission, janitorial; same day shipping
www.mscdirect.com

Ryan Herco Flow Solutions - Locations
Distributor
Worldwide distributor of dissolved oxygen analyzers. Products include water proof simple to use meter, water proof extended range meter & portable meter. Used to measure DO, pH, conductivity, TDS, salinity & temperature. Features include bonded membrane caps, waterproof housing & extension cables. Capabilities include automatic temperature compensation ranging from 32 degrees F to 86 degrees F. Accessories include DO & pH/conductivity meters, applicable buffers, calibration standards, reagent tablets, rinse solutions, cups, caps, batteries & neckstrap. Markets served include water, health, electronics, chemicals & waste. ISO 9000 compliant.
Brand Names: Hanna
webcat.rhfs.com/categorylist.aspx?catID=F47...

Terra Universal, Inc. - Fullerton, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Manufacturer of critical environment enclosures & control modules, including oxygen analyzers.
www.terrauniversal.com/glove-boxes/trace-ox...

Control Instruments Corp. - Fairfield, NJ
Manufacturer
Manufacturer of analyzers for monitoring the rising & falling concentrations of oxygen. Features include highly stable, rugged design, low maintenance, excellent repeatability & immunity to cross interference.
www.controlinstruments.com/products

Linde LLC - Murray Hill, NJ
Distributor, Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000 certified manufacturer & distributor of oxygen analyzers. Oxygen analyzers have oxygen sensor & are used for homecare & nursing home applications.
Brand Names: LifeGas
www.lindeus.com/en/index.html

Endress+Hauser - Greenwood, IN
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000/IEC17025 certified custom manufacturer of conductivity analyzers including corrosion resistant transmitters. Types of conductivity transmitters include conductivity, redox, oxygen & pH transmitters. Transmitters are available in 5.67 in. x 5.67 in. x 6.26 in. to 6.85 in. x 6.85 in. x 5.71 in. dimension. Transmitters are made from plastic or stainless housing with EPDM seals. Transmitters are suitable for chemical processes, foodstuff technology, pharmaceutical industry & hazardous applications. Meets ATEX, FM, CSA & NEPSI standards.
www.us.endress.com/oxygen

Thermo Fisher Scientific - Waltham, MA
Manufacturer, Custom Manufacturer
Manufacturer of dissolved oxygen analyzers for monitoring in various low & trace level applications. Features include PTFE membrane caps for sensor refurbishment & sensitive galvanic sensors.
www.thermoscientific.com/ecomm/servlet/prod...

Keco Engineered Controls - Lakewood, NJ
Distributor
Distributor of analyzers including carbon dioxide, chlorine & oxygen analyzers. ORP analyzers, pH analyzers, water quality analyzers, hardness analyzers, conductivity analyzers, residual analyzers, dissolved oxygen analyzers, silica analyzers, hydrazine analyzers, phosphate analyzers, effluent flow analyzers & turbidity analyzers are also available.
Brand Names: Emerson Process Management, Honeywell, Rosemount Analytical, Signet, Yokogawa
www.kecocontrols.com/products.htm

Baseline-MOCON, Inc. - Lyons, CO
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified manufacturer of standard & custom oxygen analyzers/indicators/monitors. Total carbon analyzers & non-methane hydrocarbon analyzers are available. Total carbon analyzers range in measuring capacities from 0.1 ppm to 100 ppm. Total carbon flame ionization analyzers feature electronic back pressure regulator with sample bypass system & automatic calibration. Non-methane hydrocarbon analyzers are available in +/-1% repeatability full scale response with flame ionization detector. Total carbon analyzers & non-methane hydrocarbon analyzers are UL® approved, CE certified & ETL listed.
Brand Names: Baseline
products.baseline-mocon.com/category/hydroc...

Sierra Monitor Corp. - Milpitas, CA
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified manufacturer of gas detection sensors including battery operated personal oxygen deficiency analyzers. Oxygen sensors read percent oxygen in the presence of any diluent including humidity. When the percent oxygen falls below 19.5 percent, red LED turns on to provide visual indication of the alarm augmented by an audible alarm. Accessories include an external earphone for use in noisy environments. Options include remote sensor to check confined environments for oxygen deficiency.
www.sierramonitor.com/gas/sentry/sentry_gas...

ECOM America, Ltd. - Gainesville, GA
Manufacturer
Manufacturer of carbon monoxide & oxygen analyzers. Products include heavy-duty portable emissions analyzers, compact portable combustion analyzers, handheld gas analyzers, vehicle emission testing systems (VETS), stationary equipment emission analyzers & rack mounted analyzers. Meet EPA standards. Products are available with 1 year warranty.
Brand Names: Ecom
www.ecomusa.com/emission_analyzers_products...

MST, Inc. - Hicksville, OH
Manufacturer
Manufacturer of carbon monoxide & oxygen analyzers including airline monitoring systems. Analyzers features continuous monitoring of carbon monoxide. Analyzers are weather resistance. Monitors ambient air in factories, parking garages, boiler rooms & in areas where single point gas detection is required. Dimensions include 10 3/4 in. W x 9 3/4 in. H x 7 in. D, weighs less than 7 lbs., maximum operating pressure of 100 psi & accuracy of plus/minus 5 percent of reading. Custom airline monitoring systems available. One year warranty. CSA® approved & OSHA compliant.
www.modsafe.com/airline%20monitoring.htm

Whayne Supply Co. - Locations
Distributor, Service Company
Distributor of oxygen analyzers. Specifications of oxygen analyzers include minus 202 degrees F to plus 158 degrees F operating temperature, 7,000 psig pressure ratings, 120 VAC, 50/60 Hz & 1 W power supply, 99 percent RH non-condensing humidity & 19 in. W x 6 in. D x 5.25 in. H maximum enclosure size. Oxygen analyzers are available with four digit LCD display, microprocessor based controllers, adjustable alarm contacts & electromechanical sensors. Oxygen analyzers are suitable for industrial & commercial applications.
www.whayne.com/equipment/Pages/OtherManufac...

Enpro, Inc. - Addison, IL
Distributor, Manufacturers' Rep, Service Company
Mfr's rep. & distributor of analyzers for oxygen & flue gas applications. Capabilities include audit, instrument calibration, onsite sampling, oil analysis, training, troubleshooting, repair, maintenance & rental. 24/7 service.
Brand Names: Teledyne
www.enproinc.com

Mil-Ram Technology, Inc. - Fremont, CA
Manufacturer, Custom Manufacturer
ISO 9001:2008 UL registered custom manufacturer of oxygen & ozone gas analyzers. Specifications of analyzers include 12 VDC rechargeable sealed lead-acid battery, 16 characters x 2 lines LCD display & regenerated 4 mA to 20mA transmitter output. Features of analyzers include electrochemical, catalytic, infrared or PID toxic, combustible & oxygen sensors, on board sample pump, programmable alarm relays & operator interface.
Brand Names: Mil-Ram
www.mil-ram.com/public/literature_page.html