Proximity Transducers

Home > Supplier Discovery > Supplier Results for Proximity Transducers

Provide Feedback

Proximity Transducers Suppliers

Displaying 1 to 25 out of 52 results
to Compare Suppliers or Email
Measurement Specialties, Inc. - Hampton, VA
Manufacturer, Custom Manufacturer, Service Company
Design & manufacturer of sensor products to meet application requirements in many industries including automotive, off-road, medical, industrial, consumer, military/aerospace, test/measurement & traffic applications.
Process Control Systems, Inc. - Chaska, MN
Manufacturer of proximity transducers including signal transmitters & pulse transmitters for measuring speed & velocity. Signal transmitters convert speed into 4 mA to 20 mA or up to 10 VDC analog signal for PCS, DCS or stand alone controller. Transmitter specifications include 5 rpm to 10,000 rpm operating range, -40 degrees F to plus 140 degrees F operating temperature & signal sensing up to 10,000 ft. Applications include tach feedback loops, conveyor systems, PLC, DLC & chart recorder interface, feed rolls, pumps, industrial fans & blowers & rotary airlocks.
Brand Names: Maxigard, PCS
Smith Systems, Inc. - Brevard, NC Browse our catalog of products
Manufacturer, Custom Manufacturer
HubZone certified. Custom manufacturer of proximity switches & transducers for applications where movement of metal parts must be monitored. Proximity sensors are applied in counting, safety, control, turbine flow meters & other applications. These magnetic proximity sensor units provide no-drag flow measurement for high accuracy. Proximity sensors powered with a wide range of supply voltages & compatible with digital equipment. Two & three wire models are available.
RDP Electrosense, Inc. - Pottstown, PA Browse our catalog of products
Manufacturer, Custom Manufacturer
Manufacturer of LVDT displacement & gauging transducers. Standard models are available in various mechanical configurations in both AC & DC to DC versions with outputs of plus/minus 5 volts, 0 to 10 volts & 2 wire 4-20 ma loop powered. Improved linearity specifications of plus/minus 0.1 percent available for most models. Measuring ranges start at plus/minus 0.25 mm (0.01 inch) & go up to plus/minus 470 mm (37 inches). Options for high temperature, mild radiation & high pressure available on most models. Sealed versions for wash down or submersible applications available in similar configurations. Custom designed solutions also available.
ATI Industrial Automation - Apex, NC Browse our catalog of products
Manufacturer, Custom Manufacturer
ISO 9001 registered manufacturer of standard & custom proximity transuducers. Available as robotic collision sensors in annular displacement from +/-8 degrees to +/-13 degrees & axial displacement from 0.22 in. to 0.63 in. Features include automatic reset, repeatability, energy absorption, consistent break-away response, flexible mounting surfaces, large moment rotation, adjustable sensitivity, field-rebuildable design, field-replaceable connector block assembly & rugged design. IP 65 environmental protection rating & spring options are available. Used to prevent damage to robotic end-effectors from robot crashes.
Brand Names: Protector
Trans-Tek, Inc. - Ellington, CT
Manufacturer, Custom Manufacturer
Manufacturer of displacement & proximity transducers & sensors with operating temperature up to 400 degrees F. Types include angular & linear variable differential transformers. Accessories including power supplies, transducer indicator, oscillator/demodulators & signal conditioners are also available.
Novotechnik U.S., Inc. - Southborough, MA
ISO/TS 16949, ISO 9001 & QS 9000 certified. Manufacturer of proximity sensors including transducers for control, automotive, machine engineering, plastics, medical, hydraulic & pneumatic applications. Types also include touchless & non-contacting angle, panel mount, linear, rotary, low torque, precision, hollow-shaft, industrial grade, multi-turn & potentiometric sensors. Meets VDA 6.1, AVSQ & EAQF standards.
Schenck Balancing & Diagnostic Systems - Deer Park, NY
Manufacturers portable vibration analyzers (PFT), field balancers & multi-channel monitoring systems to analyze, troubleshoot & correct overall machine vibration & bearing condition. Hardware & software packages & a complete line of accelerometers, transducers.
1-Source Electronic Components - Yaphank, NY
Distributor, Custom Manufacturer, Service Company
Stocking distributor of analog and digital proximity transducers. Various capabilities include excess inventory consignment, electronic engineering, product designing, prototyping, contract manufacturing and software application development. RoHS compliant.
Mod-Tronic Instruments Limited - Brampton, ON
Distributor, Manufacturers' Rep
Distributor of position and proximity transducers. Various features include non-contact, vibration resistant technology, analog outputs, potentiometers, protective housings and dual cable glands. Transducers are suitable for valve position, cutting blade angles, water cannon position and for float, level and pitch and yaw measurement applications. Stock items available. Most products are made in USA.
Capacitec, Inc. - Ayer, MA
Custom Manufacturer
Custom manufacturer of non-contact displacement sensors including proximity transducers for distance, thickness, concentricity, dimensional, gap, eccentricity, position control & vibration measurements. Specifications of sensors include 0.004 in. sensor OD, accuracy up to 0.2 microns, 200 kHz frequency response & 1,000 degrees C operating temperature. Cylindrical & threaded sensors, gap measuring gages, amplifiers & electronic racks are also available.
Neal Systems Inc. - Newtown, PA
Distributor & integration of instrumentation for various process measurements, process control, data acquisition, electrical protection & connection for both general purpose & hazardous areas. Types of instruments include vibration monitoring, gas leak detection & gas analysis, hazardous area equipment for intrinsic safety & purge, process measurements for temperature, pressure & flow, liquid analysis measurements, various controllers & indicators, chart recorders, handheld calibrators, process control devices including valves & drives, surge protectors & signal conditioners. Calibration equipment & software for temperature, voltage, current & HART calibrators including replaceable modules, HART-protocol communicators & device management software. Vibration & proximity detection for rotating equipment, mechanical switches, proximity sensing, accelerometer vibration detection, impact transmitters for reciprocating compressors, data analysis displays & indicators.
Brand Names: BlueTree Wireless, Burkert, Byres Security, Chessell, Gefran, L & J Technologies, M-System, MTL,...
Senix Corp. - Hinesburg, VT
Manufacturer, Custom Manufacturer
Designer & manufacturer of proximity access controls or control systems including non-contact ultrasonic distance sensors & transducers. Specifications vary depending upon models & include -40 degrees C to +70 degrees C temperature, 12 degree to 15 degree beam angle, 50 kHz to 225 kHz ultrasonic frequency, relative humidity up to 100% & 10 VDC to 30 VDC power input. Various features include stainless steel & PVDF housings, thread body & sinking & solid state switches. Options include mounting brackets, adapters, displays & hardware. Applications include automation, OEM, multi-sensor systems, tank networks, chemical environments & indoor & protected locations.
Brand Names: Senix, ToughSonic
Ives Equipment Corp. - King of Prussia, PA
Distributor, Custom Manufacturer, Manufacturers' Rep, Service Company
Manufacturers rep. & stocking distributor of tranducers. Proximity, rotary, speed, vacuum and weight.
Davis/Inotek - Irwindale, CA
Distributor, Manufacturer, Custom Manufacturer
100,000 Test, Measurement, Process & Control Instruments. NIST Traceable Calibration & Certification, All Performed In Compliance With ISO-9002, ISO Guide 25-17025 Standards. A Complete Line Of High-End Used & Rental Test Equipment
Davis/Inotek - Fairhope, PA
Distributor, Manufacturer, Custom Manufacturer
100,000 Test, Measurement, Process & Control Instruments. NIST Traceable Calibration & Certification, All Performed In Compliance With ISO-9002, ISO Guide 25-17025 Standards. A Complete Line Of High-End Used & Rental Test Equipment
Davis/Inotek - Dallas, TX
Distributor, Manufacturer, Custom Manufacturer
100,000 Test, Measurement, Process & Control Instruments. NIST Traceable Calibration & Certification, All Performed In Compliance With ISO-9002, ISO Guide 25-17025 Standards. A Complete Line Of High-End Used & Rental Test Equipment
Siemens Hearing Instruments - Piscataway, NJ
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of pneumatic products including regulators, relays & transducers. Precision pressure regulators control air pressures in applications such as pneumatic instrument circuits, test stands, production checking fixtures, & industrial air gages. Booster relays reproduce pneumatic signals in a 1:1 ratio for applications where input isolation or increased flow capacity are required. Features on the active circuit transducer include split-ranging & trigger options. Transducers accommodating current, voltage, power; differential pressure; mass flow, load, position, proximity.
Steven Engineering - South San Francisco, CA
Distributor, Custom Manufacturer
Distributor of transducers including ultrasonic proximity transducers, air, humidity, hydraulic, linear, electrical transducers & pressure transducers. Transducers are available in different styles, sizes & configurations for single to 3-phase applications. Capabilities include bar coding, engraving, enclosure cutting & punching, enclosure modification, labeling, meter configuration, prototyping, rail assembling, rail cutting & notching, terminal block marking & wire cutting, vendor managed inventory, EDI, designing, bin stocking & engineering.
Brand Names: Data Instruments, Newport, SSAC, Turck, United Electric
Turck, Inc. - Plymouth, MN
Manufacturer, Custom Manufacturer
Worldwide manufacturer & distributor of standard & custom linear displacement transducers including LVDT, position & proximity transducers. Transducers are available in different styles & specifications.
Brand Names: EZ-track (AutomationDirect) - Cumming, GA
Distributor, Custom Manufacturer
Proximity transducers offered include rugged optical encoders & rotary encoders for use in positioning & motion control applications. Model types include standard shaft & hollow shaft versions of incremental encoders & absolute encoder models with a stainless steel shaft. All optical encoders & rotary encoders feature a reinforced aluminum diecast casing & come equipped with a 2 meter cable exit.
Brand Names: Cutler-Hammer
Siemens Corp. - Washington, DC
Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
Worldwide manufacturer of position & proximity transducers. Transducers also include liquid level transducers, pressure transducers & current-to-pneumatic transducers.
PICS INC - Malvern, PA
Manufacturer, Custom Manufacturer
Manufacturers rep. of transducers including position transducers & proximity transducers. UL & CSA certified.
Acuity Research, Inc. - Menlo Park, CA
Manufacturer, Service Company
Manufacturer Of Laser Displacement Sensors. Spans From 1/8 Inch To 54 Feet; Accuracies To 4 Microns
Gulton-Statham Transducers, Inc. - Costa Mesa, CA
Pressure Transmitters & Transducers, Position Sensors, Connectors
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified August 30, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen