Water From Fuel Separators

Home > Supplier Discovery > Supplier Results for Water From Fuel Separators

Provide Feedback

Water From Fuel Separators Suppliers

Displaying 1 to 25 out of 33 results
to Compare Suppliers or Email
RCI Technologies - San Dimas, CA Browse our catalog of products
Distributor, Manufacturer
Manufacturer & distributor of liquid level purification systems including water from fuel & oil from water centrifugal separators. Products includes universal fuel purifiers, portable tank cleaning units, automatic fuel recirculating systems, water sensor kits & heating elements. Fuel purifier removes 99.9% water & 95% to 98% of dust, dirt & other normal & natural contaminates found in diesel fuel. Green Clean Certified. Made in USA.
Parker Hannifin - Velcon Filtration Division - Colorado Springs, CO
Manufacturer, Custom Manufacturer
ISO 9001:2000 certified custom manufacturer of water from fuel separators for removing water & dirt from fuels. Separators are available in various models & configurations. Specifications of separators include 3 1/16 in. to 6 in. OD, 1 15/16 in. to 4 1/8 in. ID mounting ends, 3 1/2 in. ID opposite ends, 200 mesh size & PTFE coated screens with internal aluminum clips, 5 pH to 9 pH operating range & 200 degrees F maximum operating temperature. Features include Buna-NŽ gaskets, aluminum end caps & tubes, uniform & variable flow control hole patterns, silicon treated resin impregnated papers with protective aluminum outer aluminum jackets.
Brand Names: Velcon
Becker & Associates, Inc. - East Dundee, IL Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer
Distributor of separators for water from fuel. Separators feature light weight aluminum construction, compact, water level sight gauge, manual air vent & drain valve, inside housing have coalescer cartridge, water separator canister & monitor. Specifications include height range from 18 1/4 in. to 33 3/4 in., flow rate range from 10 gpm to 100 gpm, inlet dia. 1 1/2 in. & 2 in. & outlet dia. 1 1/2 in. & 2 in. State-of-the-art filtration system designed to prevent water contaminants from entering aircraft during refueling. Meet Military Spec.
Brand Names: Beach, Becker, Determan Brownie, Digicept Emcee, Enraf, Enterprise Brass Works, FRAM, FUELMASTER,...
CentraSep Centrifuges - Indianapolis, IN
Manufacturer, Custom Manufacturer
Manufacturer of centrifugal fluid separators. Centrifugal coolant, oil from water, liquid-liquid, liquid-solid, oil reclaiming & waste treatment separators. Systems can regularly extract solid particulate down to 5 micron, sometimes to the nano-particle level. Rotor speeds of 3000 rpm and 6.34 gallon solid holding capacity. Industrial, commercial and institutional applications in various industries including pharmaceutical , aerospace, chemical, fuels and water treatment.
Harco Mfg. Co. - Newberg, OR
Manufacturer, Custom Manufacturer
Custom manufacturer of water from fuel separators. Critical & residential grade engine exhaust silencers, spark arrestors & arresting silencers, oil from water separators, heat exchangers & space heaters are also available.
Shaw Development, LLC - Bonita Springs, FL
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 and ISO 14001:2004 certified manufacturer of standard and custom fuel from water and water from fuel separators. Available in 10 micron filter rating and 45 GPH maximum flow rate. Capabilities include design and engineering, computational fluid dynamics (CFD) analysis, prototyping and testing.
Fueltec Systems LLC - Granite Falls, NC
Manufacturer of water from fuel separators. Products include industrial & mobile tank cleaning systems, automated fuel polishing systems & on-board fuel polishing systems. Suitable for diesel, gasoline, & E-10 fuels.
General Industries, Inc. - Goldsboro, NC Browse our catalog of productsCAD Drawings
Manufacturer, Custom Manufacturer
Manufacturer of standard & custom fuel from water & water from fuel separators. Oil water separators in underground & above ground models in horizontal shape with single wall & double wall can be fabricated. Features include 70 mils polyurethane coating & capacities up to 50,000 gal. Meets ULŽ58 & ULŽ2215 standards & EPA phase I/II discharge requirements. Products are available with 1 year standard warranty & 30 year warranty against corrosion.
Brand Names: AquaSweep
Presto Sales & Service - Deer Park, NY
Distributor of water from fuel separators. Controls fuel flow & separates water & other elements. Can handle maximum temperatures up to 122 degrees F & maximum flow rates up to 15 GPH. Features include 1/4 in. FPT I/O.
Allied Group, Inc. - Mendham, NJ
Manufacturer, Custom Manufacturer
Manufacturer of standard and custom water from fuel separators and water from oil separators. Available as fiberglass liquid/liquid separator filters designed for fuel water separation, oil water separation and other hydrocarbon/water separation. Filter applications include diesel/water separation, transformer oils, vacuum dehydration and oil/water separation.
Dieselcraft Fluid Engineering - Auburn, CA
Distributor, Manufacturer
Manufacturer & distributor of separators including water from fuel & water from oil separators. Available in sizes of 3 in. x 8 in., 5 in. x 12 in. & 5 in. x 16 in. sizes. Length of separator is engineered to give the maximum residence time for power rating or flow rate capacity. Separators are used to separate water & contaminants from the fuels & oils.
Story Electric Co., Inc. - Paducah, KY
Distributor of water separators. Industries served include fleet and marine.
Brand Names: Ametek, Baldwin Filters, Dahl
Hydro Quip, Inc. - Seekonk, MA Browse our catalog of products
Manufacturer, Custom Manufacturer
Manufacturer of a complete line of above & below ground oil water separators for the removal of free & dispersed non-emulsified oil & oil settleable solids from waste streams manufactured to API standards. Also the removal of oil contaminants, fuel & gas. Constructed of carbon steel, stainless steel or fiberglass & available in a range of sizes from 2 GPM to 3000 GPM. Features of both above & below ground oil water separators include non-plugging, very high surface area, operating temperatures up to 212 degrees F, 99.99 percent removal of free & dispersed oil, 20 micron size or larger, high flow rates, no moving parts, no power consumption or consumable wearing elements, no chemicals, absorbent or filter cartridges to remove, replace, or dispose. Above ground separator features include compact size, solids storage capability & optional integral oil storage & is a special purpose prefabricated parallel corrugated plate, rectangular, gravity displacement type separator. Below ground separator features include service & maintenance of coalescing media & removal of sludge from outside, no confined spaces & shallow burial depth & is a special purpose prefabricated parallel corrugated plate gravity displacement type oil/water separator designed to remove free & dispersed non-emulsified oil & sellable solids. Meets EPA Method 413.2 & European Standard EN 858-1. Manufacturing procedures fulfill N 858-1 performance standards. HD Q-PAC for the coalescing media in oil/water separators. Private labeling available.
The Titus Company - Morgantown, PA
Distributor, Manufacturer, Manufacturers' Rep, Service Company
Distributor of water from oil separators. Various applications include naval, nuclear, chemical, petrochemical, pharmaceutical, manufacturing and food and beverage. 24/7 emergency services available.
Brand Names: Boge, Palatek, Sullivan-Palatek
SmartFlow Technologies - Apex, NC
Manufacturer, Service Company
Manufacturer of tangential or cross flow filtration systems including separators for removing fuel from water or water from fuel. Specifications of filtration systems vary depending upon models & include 1 L to 100,000 L filtration capacity, 2 L polysulfone & 5 L to 500 L stainless steel jacketed tanks, four-diaphragm piston pump, 15 lpm to 200 lpm pump capacity, 4 lpm to 250 lpm feed pump, 16 lpm to 3,600 lpm recirculation pump, 0.5 hp motor, 3/4 in. & 1 in. terminal columns, magnetic flowmeter with local & remote display on video recorder & 4 mA to 20 mA analog output, 316L stainless steel & re-sealable silicone tubing, 1/2 in. to 6 in. retentate loop size & 208/380 VAC, 15 A, three phase, 50/60 Hz power supply.
Admiral Filter Company - Sandyston, NJ
Manufacturer, Service Company
Woman owned manufacturer of water from oil & water from fuel separators. Products such as fuel filter separators & oily water separators are available. Industrial vessel repair services are available. Meet MIL-I-45208 & NAVSEA standards.
Brand Names: OWS
Algae-X International - Fort Myers, FL
Custom manufacturer of separators for removing water, sludge & suspended particulates from fuel & oil. Separators are available with brass fill plugs, air purge & drain ball valves, filter replacement elements, stainless steel mounting hardware & optional compound gauges & water sensor alarm kits.
Brand Names: Algae-X
Stanadyne Corp. - Windsor, CT
Distributor, Manufacturer, Custom Manufacturer
ISO 14001:2004, ISO 9001:2000, ISO/TS 16949:2002 certified worldwide manufacturer & distributor of diesel fuel filtration systems including fuel from water & water from fuel filters. Products include see-through water bowls, electric heaters, hand & electric priming pumps, electric lifts & transfer pumps. Markets served include agricultural, construction, industrial & commercial vehicles.
Koehler Instrument Co., Inc. - Bohemia, NY
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of separators including fuel from water, oil from water, oil from liquid, water from fuel & water from oil separators. Products include water separability testers & demulsibility apparatus. Water separability testers feature movable digital stirrer with microprocessor control, illuminated heating bath, microprocessor temperature control with digital display & built-in protection against over temperature & low liquid level hazards, optional sensor for direct measurement of sample temperature & built in drain for draining of bath medium. Demulsibility apparatus are used for testing the ability of medium to high viscosity oils to separate from water when water contamination & turbulence are present. Demulsibility apparatus meet ASTM D2711 & DIN 51353 standards. Products made in the USA.
Baron USA, Inc. - Cookeville, TN
Custom manufacturer of water from fuel separators including oil contaminant separators & low vacuum oil degasifiers for purification of hydraulic, turbine & lubricating oils. Available with programmable logic controller (PLC) one-touch automated controls & vacuum dehydration systems. Suitable for electrical & compressor seal oils, circulating oil systems & vacuum pumps.
Mastry Marine & Industrial Supply, Inc. - Saint Petersburg, FL
Distributor of fuel from water & water from fuel separators. Available as fuel filters/water separators. Used for the separation of separates damaging free water & contaminates from gasoline, diesel, heating oil & kerosene.
Brand Names: Yanmar
TSI-Enquip Inc. - Tulsa, OK
Manufacturer, Custom Manufacturer
Manufacturer of water from fuel separators which can be applied to many applications & numerous configurations involving spill protection or liquid separation. The displacement type separator design allows catastrophic release of oil to be contained in the separator. A full 360 degrees wrap outer shell constructed of 1/4 in. thick carbon steel is added to meet secondary containment regulations.
Specific Equipment Co. - Houston, TX
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of filter separators including water from fuel separators. Filter separators are available in coalescing filter type in simplex & duplex configurations suitable for removing free & emulsified water & solids from diesel & turbine fuel. Features include fabricated steel shell with removable end cover, inlet & outlet connections, manual drain, vent & block valves, water level indicator glass, internal element supports & seals. Solids removing capabilities include up to 5 micron sizes from fuel. Options include differential pressure alarm & gauges. Applications include diesel engines & liquid fueled gas turbines.
Group Dekko Inc. - Garrett, IN
Custom Manufacturer, Service Company
Electrical wire harnesses, specialty heater wire, heating solutions, wire winding technologies, metal fabrications, powder coating, injection molding, profile extrusion, contract manufacturing and assembly, architectural lighting, fluid controls, and more recently, LED lighting
Sexton & Peake, Inc. - Columbia, MD
Distributor, Custom Manufacturer, Manufacturers' Rep, Service Company
Distributor of filters.
Brand Names: ALSOP, Allen, Ametek, Baldwin, Balston, Briggs & Stratton, Dahl, Ernst, Graymills, HARMSCO,...
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified September 1, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen