Testing Services

Home > Supplier Discovery > Supplier Results for Testing Services

Apply Qualifications

Search Within # Miles
Show companies within
miles of:
Search Within Results

Provide Feedback
to Compare Suppliers or Email
Consolidated Laboratories, Inc. - Covina, CA
Service Company
ISO 10012-1, ANCI/NCSL Z540-1-1994, & MIL-I- 45208 certified testing services. Types of tests include performing dynamics such as vibration & shock testing, pneumatic testing, hydraulic tests such as pressure & flow testing, & environmental chamber testing. Other vibration testing capabilities include sine, random, sine on random, resonance search, & fixture evaluation. Shock testing capabilities include classic half-sine & sawtooth waveforms, bench handling, crash safety, hi impact, & random drop testing services. Other testing services include acceleration, altitude, burst pressure, contact resistance, contaminated fuel, dielectric withstanding voltage, electrical/electronic evaluation, ESS testing, explosive atmosphere, fluid resistance, helium leakage, high temperature, humidity, icing, insulation resistance, life, low temperature, pressure cycling, pressure drop, proof pressure, rain, salt spray (fog), sand & dust, temperature cycling, temperature-altitude, terminal strength, thermal shock, voltage drop, washdown, & waterproof testing. Other services include fixture design & assistance in test procedure writing, as well as interpreting conflicting governing specifications.
Innovative Test Solutions, Inc. - Schenectady, NY
Service Company
Composite structural, durability & wear testing services. Industries include ceramic coatings, aircraft engine, turbine, automotive & biomedical testing. Testing capabilities include digital servo controlled electro-hydraulic testing with load up to 50,000 lbs., electro-mechanical testing small loads up to 1,000 lbs., dead weight creep-rupture testing up to 10,000 lbs., electro-dynamic shaking from 50 to 5,000 lbs., digital vibration simulating & transportation testing up to 2,200 lbs. & fretting to a maximum of 1,000 Hz, amplitude of 0.25 in. & 1,500 degrees F.
Modern Industries, Inc. (Laboratory Testing Division) - Erie, PA
Service Company
Chemical analysis of activated carbon, aggregated, asphalt, cement & concrete, metals, soil, water, waste water, water leachables, ferrous alloys, nickel alloys, coal analysis, oil analysis. Paint, trace containment testing, polymers & plastics, silicate chemistry general.
Accutek Testing Laboratory - Fairfield, OH
Service Company
Testing services for many industries including aerospace, medical, power generation & manufacturing. Mechanical testing qualifications include tensile (ounces to 60,000+ lbs.), fatigue (axial, bending, torsion, roller chain), rotating beam, hardness (micro to Brinell including Shore A), abrasion (Taber, micro motion, porous coating), torque friction, welding, abrasives. Testing can be performed to organization (ISO, ASTM, NAS, AWS, ASME) protocols. Test procedures can be customized to client product requirements. Regular microstructure evaluations up to 2000X utilizing color digital microphotography. Full time certified welding inspector on staff. Can assist with many welding processes including GTAW, GMAW, SMAW, TB, LBW. Specializing in aluminum conductor, brazing & ASME/AWS procedures. Static & dynamic medical implant testing for many types of devices including hip implant devices, knee implant devices, spine constructs & VBRs, wear testing, plates, screws, shoulders. On-site testing, medical testing specifications include ASTM, ISO & FDA.
Imagineering Finishing Technologies - South Bend, IN Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
AS 9001, ISO 14001:2004 NADCAP certified. Magnetic particle (MPI), fluorescent penetrant (FPI), & visible dye inspection. Approved supplier to most major OEM's. 2-5 Day Turnaround. AS 9000 & NADCAP accredited. Level III inspector on-site. Database of 1400+ specs. for aerospace, medical, automotive, military, nuclear & industrial applications.
AMETEK - Atlas Material Testing Solutions - Chicago, IL
Manufacturer, Service Company
Testing services. Services include natural weathering, temperature, humidity, light fastness, and photovoltaic testing. Industries served include electronics, automotive, military and aerospace and pharmaceuticals.
RNDT, Inc. Nondestructive - Johnstown, PA
Service Company
ISO 17025 certified testing & inspection services including non-destructive testing services. Services include radiography, ultrasonics, acoustic emission, magnetic particle, liquid penetrant, visual examination, level III & CWI services. Ultrasonic testing uses the transmission of high frequency sound waves into a material to detect imperfections within the material or changes in material properties. Level II & level III certified UT technicians. Certified to AAR: M-101, M-107, M-208; MIL-I-45208A, ASME Section III NCA-3800, MIL-STD-45662A & ISO-Z-540-1.
E-Labs Inc. - Fredericksburg, VA
Service Company
ISO 9000 compliant state-of-the-art drip proof testing services. Services are also available for testing dip humidity, electronic systems, climatics, salt fogs, ballistic materials, less than lethal devices, acoustic noise, pressure, thermal shock, ballistic materials, vibration, products & military & environmental simulation. Research & development, fabrication consulting, test planning & fixture designing services are also available. Applications include military, automotive, aerospace, information technology & commercial. Capabilities include 20 chambers ranging from 2.00 cu.ft. to 3,500 cu.ft. size, microprocessor controllers & products savers.
IMR Test Labs - Lansing, NY
Service Company
Materials testing services including metallurgical evaluation, mechanical testing, chemical analysis, accelerated weathering, failure analysis and fatigue testing. Other capabilities include analysis of metals, polymers, composites, coatings, corrosion products, solutions, ceramics and much more. Accredited by A2LA, Nadcap, GE S-400, Pratt & Whitney and many other major manufacturers in the aerospace, medical device, nuclear, automotive and oil and gas industries. Most routine jobs turned in 3 days or less.
Mocon - Minneapolis, MN
Manufacturer, Custom Manufacturer, Service Company
Permeation & barrier testing services for gas detection, measurement & analysis.
Hyphen - Kitchener, ON
Custom Manufacturer, Service Company
Electrical and mechanical testing services. Types include vibration, shock, drop, thermal, tensile, compression, sound, package, operating and non operating temperature, emission, electrostatic discharge and surge testing services.
SGS Herguth Laboratories, Inc. - Vallejo, CA
Manufacturer, Service Company
ISO 9001:2008 and ISO/IEC 17025:2005 certified testing services. Various fluids include antifreeze, circulating, compressor, cutting, diesel engine, extreme pressure, hydraulic, synthetic and transformer oils and electro hydraulic control (EHC), metal working, phosphate ester and transmission fluids. Various industries served include agriculture, aviation, manufacturing, marine, mining, construction, petroleum and water treatment. Meets ASTM and ANSI standards and MIL-Q9858A Spec.
Henry J. Yeager Laboratories - Lancaster, PA
Service Company
Chemical analysis & testing of metals (AA & ICP). Includes metallographic analysis of metals, failure analysis, basic sand testing, & chemical analysis of foundry materials such as limestone, sand, refractories & additives.
General Plastics Manufacturing Company - Locations
Manufacturer, Custom Manufacturer, Service Company
Materials testing services. Services include physical properties testing, flammability testing, developmental testing & testing for aerospace, nuclear & defense applications. Capabilities include compression & tensile testing, flexural & shear testing, prototype testing, hydrostatic pressure testing, materials compliance testing, peel strength testing, thermal conductivity testing, CMM inspection, pool fire simulation & impact testing.
Acoustical Systems, Inc. - Vandalia, OH Browse our capabilities profile
Custom Manufacturer, Service Company
Testing services including acoustic, environmental & noise vibration harshness (NVH) testing. Capabilities include engineering, designing, project & program management, fabricating, on-site inspection, consulting, noise abatement, installation & monitoring.
Luvak, Inc. - Boylston, MA
Service Company
An ISO/IEC 17025 & Nadcap accredited materials testing laboratory. Chemists have experience analyzing metals, alloys & other materials. Capabilities include compositional & trace element analysis of metals & other materials by direct current plasma emission spectroscopy, flame atomic absorption spectroscopy, graphite furnace atomic absorption spectroscopy & classical wet chemistry.
F2 Labs - Locations
Service Company
Compliance testing services for electronics, electromechanical and mechanical applications. Types include CE, EMC, EMI/RFI, safety, FCC and performance testing. On-site testing services also available.
Laser Product Safety, LLC - Cary, NC
Manufacturer, Service Company
Laser safety testing services. Classification services for laser, LED, UV and IR products and components to global laser/LED safety regulations. Capabilities include CDRH product reports, IEC 60825-1 reports, facility assessments, laser safety eyewear testing, product safety testing, LOCA testing, shock and vibration testing.
JG&A - Metrology Center - Detroit, MI Browse our capabilities profile
Manufacturer, Service Company
Industrial CT scanning services that allow internal and external part inspection in 3D using non-destructive testing methods. CT capabilities include cone beam, line beam and planar CT systems. Before scanning, a feasibility study is conducted to pair each project with the right CT system to ensure cost effective and reliable solutions. Along with scanning, various types of analysis can be conducted including part to CAD, part to part comparison, assembly analysis, void analysis, reverse engineering, wall thickness analysis, GD&T programming, 2D X-Ray and real time X-ray.
Magna Chek - Madison Heights, MI
Distributor, Custom Manufacturer, Service Company
ISO/IEC 17025:2005 certified non-destructive testing (NDT) including inspection services for parts & materials. Capabilities include dye penetrant, eddy current, hardness, magnetic particle, X-ray & gamma ray radiography & ultrasonic testing. Applications include castings, forgings, heat exchanger tubes, shafts, gears, connecting rods, steering arms, yokes, suspension components, aircraft structures & components, welded assemblies, pressure vessels & piping, electronic circuitry & bridge girders.
Harwood Engineering Co., Inc. - Walpole, MA
Manufacturer, Custom Manufacturer, Service Company
Device testing services, durability testing services, non-destructive testing services, physical properties testing services & pressure or fluid integrity testing services. Also hydrostatic testers, destructive testing equipment & test facilities.
Spectrochemical Testing, Inc. - Struthers, OH
Service Company
ISO/IEC 17025-1999 certified on-site testing & inspection services. Testing services include chemical, metallurgical, & physical testing. Other testing services include coating, failure & mechanical testing.
Mantec - Danielson, CT
Manufacturers' Rep
Manufacturers rep. for industrial testing services. RFI/EMI testing and environmental testing services for military and commercial applications are available. Meet MILSTD 461/462 standards.
JFP Technical Services, Inc. - Eastlake, OH
Service Company
Materials testing services. Testing services can help prevent future process breakdowns & product recalls, saving through thorough analysis & expert implementation of diverse testing procedures. Can analyze adhesive, plating & coating, circuit boards, solid state electronic, fasteners, bearings, gears, medical products, ferrous & nonferrous metals, tool, dies & tubular products among several others. Can also assist in process troubleshooting of chemical reactors & mills, forging & cold forming, heat treating, machining, roll forming & tube mills.
S & N Labs - Santa Ana, CA
Service Company
Testing services with capabilities including medical device analysis, pharmaceutical & nutraceutical testing, paint, coating & ink analysis, silicone testing, foreign object determination, arson accelerant analysis, formulation & deformulation.
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified September 3, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen