ThomasNet.com

Compliance Testing Services

Home > Supplier - Product/Service Results: Compliance Testing Services

Narrow Your Search

Search Within Results
Search Within # Miles
Show companies within
miles of:

Expand Your Search





Provide Feedback

Compliance Testing Services Suppliers

Displaying 1 to 25 out of 79 results
to Compare Suppliers
Rhein Tech Laboratories, Inc. - Herndon, VA
Service Company
ISO/IEC 17025: 2005 certified compliance testing services. Wireless radio frequency device testing, CE mark testing, military & defense aerospace electromagnetic compatibility (EMC) testing, electrical/electronic products safety testing, radio frequency on-site survey analysis & shielding effectiveness, penetration depth, reflection & scattering testing services are available. Services also include EMC/EMI design evaluation/mitigation, radar cross section & high range resolution measurement, energy efficiency testing & homologation/certification services. Products tested are ULŽ & NRTL, FCC & CSAŽ approved.
Quality Systems Integrated Corporation - San Diego, CA
Distributor, Manufacturer, Custom Manufacturer
ISO 9001:2000 certified compliance testing services. Capabilities include component selection, rework engineering & systems development. Other services include product development, printed circuit board (PCB) testing & destruction, PCB inspection & assembly, microwave & RF contract manufacturing, private label & turnkey manufacturing, aerospace instrumentation, rapid prototyping engineering, global testing & compliance, electronic designing, lead-free & analytical equipment assembly & consulting services.
Element Materials Technology - St. Paul, MN
Service Company
ISO 9001:2008, ISO/IEC 17025:2005 & ISO/IEC 17020 certified, A2LA & NADCAP accredited compliance testing services. CPSIA testing & ROHS testing are available. Materials tested include metals, alloys & nonmetals. Compliance testing is evaluation of materials, products & systems to ensure compliance with specified standard or set of standards. Meet RoHS standards.
Magnetic Component Engineering, Inc. - Torrance, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 & AS 9100 Rev C certified product compliance testing services for physical properties of magnets, magnetic materials & magnetic components. Testing services include BH curves, chemical analysis, mechanical tests, flux density & total flux tests, humidity chamber age tests, autoclave age tests, conventional age testing, pressure cooker testing & salt spray testing. Certificate of compliance/conformance is available for the tested products. Markets served include aerospace/defense, medical, industrial, research labs, semi-conductor & telecommunications.
General Plastics Manufacturing Company - Tacoma, WA
Manufacturer, Custom Manufacturer, Service Company
Materials compliance testing services for aerospace applications. Capabilities also include CMM inspection, flammability testing, flexural & shear testing, compression & tensile testing, prototype testing, hydrostatic pressure testing, materials compliance testing, peel strength testing, thermal conductivity testing & impact testing.
RNDT, Inc. Nondestructive - Johnstown, PA
Service Company
ISO 17025 certified testing & inspection services including non-destructive testing services. Services include radiography, ultrasonics, acoustic emission, magnetic particle, liquid penetrant, visual examination, level III & CWI services. Ultrasonic testing uses the transmission of high frequency sound waves into a material to detect imperfections within the material or changes in material properties. Level II & level III certified UT technicians. Certified to AAR: M-101, M-107, M-208; MIL-I-45208A, ASME Section III NCA-3800, MIL-STD-45662A & ISO-Z-540-1.
Wyle - El Segundo, CA
Distributor, Service Company
ISO 9001:2000, ISO 9001:2008 & AS9100B certified compliance testing services. Services are available to numerous standards including NEBS, ANSI/UL, ASTM, Bellcore, CE, DOT, ETSI, FCC, IEC, IEEE, SAE & other domestic & international requirements.
Darter Plastics, Inc. - Becker, MN
Manufacturer, Custom Manufacturer, Service Company
ISO & UL compliance metal testing services for aluminum, hardened steel & steel. Capabilities include hot stamping up to 4 in. x 10 in., injection mold design, manufacturing, offshore tooling, 2D & 3D CAD modeling, prototyping, engineering, documentation, inspection & technical support. JIT delivery.
Capabilities
DDL a TCP Reliable Co. - Edison, NJ
Service Company
ISO 9001:2008 certified compliance testing services. Services such as package testing, electrosurgical testing, packaging materials testing, customized package testing, thermal performance testing, sustainable packaging testing, product testing, consumer product package testing & mechanical testing are available. Meet ANSI, AAMI, ASTM, CENELEC, EIA, ETS, IEC, ISO, JIS, NAVMAT, NEMA, SAE, JEDEC & TAPPI standards.
Datasyst Engineering & Testing Services - Delafield, WI
Service Company
A2LA & ISO 17025 certified testing laboratory, providing manufacturers product testing & development for mechanical & electrical assemblies & components. Vibration testing, shock testing, strain & stress testing, load and fatigue testing, environmental testing, seismic testing, mechanical testing & green technologies testing.
Testing Engineers - San Leandro, CA
Service Company
ISO/IEC 17025:2005 certified compliance, component failure & composite testing services. Capabilities include field inspection, laboratory, consulting & non-destructive testing services. AASHTO, AWS, I.C.C. & DSA accredited & affiliated.
NCEE Labs - Lincoln, NE
Manufacturer, Service Company
ISO 17025 accredited, product compliance testing services including environmental testing. Capabilities include electromagnetic compatibility specializing in emissions testing of unintentional as well as intentional radiators for wireless testing needs, environmental including temperature & humidity testing, salt fog, ingress protection, dust, shock & vibration & altitude, safety testing to international standards & X-ray capabilities to assist with troubleshooting in production & quality assurance. Testing services are available for information technology, office, agricultural, pressure, semi-conductor fabrication laboratory test & measuring equipment, small consumer electronics, household appliances, audio/video components & irrigation systems & transmitters, receivers & wireless devices.
Korlipara Engineering - Melville, NY
Custom Manufacturer, Service Company
Compliance testing services. Environmental consultants offering environmental engineering services, environment management services, & environmental investigations. Environmental investigations include environmental audits, hazardous waste management, & phase I & II studies
Focus Compliance & Validation - Knoxville, TN
Service Company
Trial burn & test planning & management services. Assist client in planning & conducting performance test programs. Develop a comprehensive test plan including sampling, analysis & monitoring methods. Implement appropriate quality assurance & quality control procedures. Assist client in obtaining permits such as developing RCRA, TSCA & air permit applications, & responding to questions from regulatory agencies. Complete services are provided to implement test program & provide complete and accurate test reports.
Anderson Laboratories, Inc. - Greendale, WI
Service Company
A2LA accredited ISO/IEC 17025:2005 certified compliance testing services. Chemical analysis, mechanical testing, failure analysis, metallography, weld performance & procedure qualification, environmental analysis & specialty testing services are available. Chemical analysis capabilities include material/contaminant identification, combustion analysis, spectroscopy & X-ray fluorescence. Mechanical tests for parameters such as bend, compression, impact, hardness, load, tensile strength, elongation/reduction & yield strength of materials can be performed. Environmental simulation analysis includes CASS testing, corrosion evaluation, fog testing, humidity testing, salt spray testing & temperature cycling.
Capabilities
Bacon Engineering Limited - Toronto, ON CAN
Custom Manufacturer, Service Company
Combustion and emissions testing services. Test capabilities include NOx, SOx, and CO2 emissions.
SMS Technologies Inc. - San Diego, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000, ISO/TS 16949, QS-9000, & AS-9100 certified testing services including x-ray testing services, microwave testing services, electronics testing services, & compliance testing services. Available testing services include various in-house services, development of test programs & fixtures. Capabilities include in-circuit test, functional test, RF test, X-ray inspection, flying probe, boundary scan, & environmental stress screening. Markets served include military, computer & peripherals, medical, telecommunications, automotive, industrial, & consumer products industry. FDA registered, IPC-A-610 compliant, & NSA & COMSEC approved.
American Testing Laboratory, LLC - South Hackensack, NJ
Service Company
International testing & compliance services to test for compliance to ANSI/BIFMA, ASTM, ISTA, DOT, CPSC, TAPPI or any government, military or industrial test standard. Specific testing programs can be tailored to meet specific needs. Industries served include office equipment, aerospace, defense, pharmaceutical, automotive & commercial.
Cashins & Associates, Inc. - Wakefield, MA
Service Company
Compliance air testing services, including OSHA compliance testing. Capabilities include indoor air quality consulting, site assessment, HVAC systems and building configuration inspection, audit, air monitoring, mold and moisture evaluation, health and safety programs, ventilation system evaluation, industrial hygiene air sampling, building material inspection, safety and health training, certified industrial hygienist consulting, noise monitoring and asbestos and hazardous material inspection and consulting.
Bechtol Engineering & Testing, Inc. - Deland, FL
Service Company
Compliance testing services such as geotechnical engineering services & environmental engineering & testing services. Geotechnical engineering services include landfill/solid waste facility evaluation & permitting. Environmental engineering & testing services such as landfill/solid waste compliance monitoring are available.
Jasper Compliance Services - Walterboro, SC
Service Company
Environmental & regulatory compliance consulting services including compliance testing services. Compliance testing services are available for handling, storage & disposal of hazardous or non-hazardous wastes, radioactive wastes & laboratory chemical wastes. Other services such as waste management consulting & program development services, air shipping services, transportation services, waste minimization consulting services, personnel protection programs & training services, supplemental staffing services & outsourcing services are also available.
Percept Technology Labs - Boulder, CO
Service Company
Compliance testing services.
Motorola Product Testing Services - Lawrenceville, GA
Service Company
Product safety & environmental stress testing, product certification,reliability, electromagnetic compatibility & immunity testing, battery pack & cell performance testing, lithium-ion transportation & regulatory compliance testing services.
Eclipse Compliance Testing - Solon, OH
Service Company
Eclipse Compliance Testing provides Regulatory Compliance Testing Services to test and evaluate electronic gaming devices and related systems. We can evaluate devices and systems for any regulatory standard, identify issues, and author reports on our findings.
ACC Antietam Compliance - Myersville, MD
Service Company
CE marking service for machines exported to Europe, in compliance with safety requirements established by the European Union. Services include on site electrical, EMC & EMI testing, on site technical & engineering assistance, documentation review & verification, design review, & CE type examinations. CE mark conformity assessment programs include hazard analysis & safety review, preparation of technical construction files, testing & third party reporting, & completion of a Declaration of Conformity. Applications include general product safety & product liability, & product specific directives such as packaging equipment, machinery, electromagnetic compatibility, personal protective equipment, medical devices, pressure vessels, pressure equipment, & gas appliances.
to Compare Suppliers
Back to top
© 2012 Thomas Publishing Company. All rights reserved. See Terms and Conditions or Privacy Statement. Website Last Modified June 4, 2012.
print screen
Sign Up | Log In | Product News | Promote Your Business