Non-Destructive Testing (NDT) Services

Home > Supplier Discovery > Supplier Results for Non-Destructive Testing (NDT) Services

Apply Qualifications

Search Within # Miles
Show companies within
miles of:
Search Within Results

Provide Feedback
to Compare Suppliers or Email
Mitchell Laboratories - Pico Rivera, CA
Service Company
FAA and NADCAP certified non-destructive testing (NDT) services. Capabilities include ultrasonic inspection, eddy current inspection, penetrant inspection, magnetic particle inspection, radiography and phased array/linear array inspection. Capabilities also include Level III engineering, process engineering, consulting and training.
Pacific Magnetic & Penetrant Co. Inc. - North Hollywood, CA
Manufacturer, Service Company
Testing services for the aerospace industry. Other services include chemical processing, passivation, pre-penetrant etch, chemical cleaning and mechanical cleaning. High humidity, salt spray, and copper sulfate passivity testing also available.
JANX - Locations
Service Company
Non-destructive (NDT) testing services. Services include gamma & X-ray radiographic inspection, wet, dry & fluorescent magnetic particle inspection, dye penetrant inspection, double joint rack & internal crawler X-ray inspection, ground penetrating radar (GPR) for rebar location, shear wave ultrasonic flaw detection & hardness testing. Plastic fusion testing & qualification, demagnetizing, visual inspection, film duplication, positive material identification (PMI), ferrite testing, sonic leak testing, automatic corrosion scanning & mapping & stress corrosion crack location & sizing services are available.
RNDT, Inc. Nondestructive - Johnstown, PA
Service Company
ISO 17025 certified testing & inspection services including non-destructive testing services. Services include radiography, ultrasonics, acoustic emission, magnetic particle, liquid penetrant, visual examination, level III & CWI services. Ultrasonic testing uses the transmission of high frequency sound waves into a material to detect imperfections within the material or changes in material properties. Level II & level III certified UT technicians. Certified to AAR: M-101, M-107, M-208; MIL-I-45208A, ASME Section III NCA-3800, MIL-STD-45662A & ISO-Z-540-1.
Imagineering Finishing Technologies - South Bend, IN Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
AS 9001, ISO 14001:2004 NADCAP certified. Magnetic particle (MPI), fluorescent penetrant (FPI), & visible dye inspection. Approved supplier to most major OEM's. 2-5 Day Turnaround. AS 9000 & NADCAP accredited. Level III inspector on-site. Database of 1400+ specs. for aerospace, medical, automotive, military, nuclear & industrial applications.
Team Industrial Services - Alvin, TX
Manufacturer, Service Company
ISO 9001:2008, ISO 14001:2004, ISO 17025 non-destructive (NDT) testing services. Liquid penetrant, magnetic particle, radiographic, ultrasonic, visual & remote visual inspection, electromagnetic testing, positive material identification & vendor quality assurance services are also available. Industries served include aerospace, automotive, military, metals, pharmaceutical & cement manufacturing, water & wastewater, gas processing & LNG, refining, pulp & paper & power generation.
MISTRAS Services - Kent, WA
Manufacturer, Service Company
Non-destructive (NDT) testing services. Capabilities include designing, digital imaging, engineering and inspection. CE certified.
NDT Specialists, Inc. - Oak Creek, WI
Service Company
Testing services including non-destructive testing. Non-destructive testing methods include radiography, digital radiography, ultrasonic testing, liquid penetrant testing, magnetic particle testing, corrosion erosion, visual examination, acoustic emission & eddy current testing. Testing services are suitable to detect discontinuities formed in the casting process including shrinkage, gas holes, gas porosity, sand inclusions cracks hot tears & misruns, locating discontinuities in weldments, searching for flaws & defects, detecting if food products are contaminated, locate missing pieces of equipment in a product or locating contamination of a foreign product.
Brand Names: Zyglo
PH TOOL Reference Standards - Telford, PA
Manufacturer, Custom Manufacturer, Service Company
Non-destructive testing (NDT) calibrating services. Capabilities include recalibration reminder service on blocks to be recertified on a regular calibration frequency.
Consolidated Special Inspections, LLC - North Charleston, SC
Manufacturer, Service Company
Non-destructive testing (NDT). Fully certified inspectors capable of performing magnetic particle inspections (both visible and fluorescent), dye penetrant inspections (solvent removable and water washable), visual inspections (direct and remote viewing), ultrasonic inspections (longitudinal and shear wave), and metallurgical analyses (impact, hardness, and comparator).
Patriot Weld Inspection, LLC. - Hersey, MI
Service Company
Non-destructive (NDT) and materials testing services. Capabilities include boiler installation and repair, welder testing and certification, inspection, ultrasound weld and flaw detection, corrosion or erosion survey/analysis and vendor surveillance. Meets AWS CWI, ASNT Level 3, API 1104, AWS D 1.1 and D 1.5, API and ASME standards.
JB Testing, Inc. - Blaine, MN Browse our capabilities profile
Service Company
Non-destructive (NDT) testing services. Additional services include magnetic particle inspection, liquid penetrant inspection, radiography, metallography, hardness testing, pressure testing, tensile testing, ultrasonic flaw detection, and eddy current detection. Suitable for aerospace, military, automotive, medical, and other industries. Meets ASTM specifications.
Testing Engineers - San Leandro, CA
Service Company
Non-destructive testing services including radiography (x-ray) inspection, dye-penetrant, mag-particle & ultrasonic testing. Applications include everything from ship hulls to fire-damaged electronics. Dye-penetrant & mag-particle testing are used extensively by manufacturers for quality control, particularly on large steel fabrications. Radiography is utilized to detect flaws in critical welded joints & in machined assemblies.
Alloyweld Inspection Co., Inc. - Bensenville, IL
Service Company
Magnetic particle (Magnaflux), liquid penetrant (Zyglo), contact & immersion ultrasonics, pressure, visual/microscopic, x-ray; film/Fuji digital computed x-ray is available for inspection of bar stock, welds, forgings & castings.
Accu-Chek, Inc. - Corydon, IN Browse our capabilities profile
Distributor, Service Company
ISO/IEC 17025 accredited non-desctructive testing services. All IMTE's are calibrated using written procedures & standardized data sheets. All work is performed by trained technicians & is continually monitored by both internal and external ISO 17025 auditors.
Modern Industries, Inc. (Laboratory Testing Division) - Erie, PA
Service Company
Nondestructive testing including magnetic particle inspection, liquid & liquid dye penetrant, level III certified personnel, field service, multidirectional magnetization to 6000 A, high production multi-shift operation with capacity to 12 ft. Long.
A-Scan Laboratories, Inc. - Carson, CA
Service Company
Non-destructive(NDT), radiographic, ultrasonic and X-Ray testing services. Inspection, qualification and training services also available. Nadcap certified.
Quad City Testing Laboratory, Inc. - Davenport, IA
Service Company
Nondestructive testing services including visual, liquid penetrant, magnetic particle, radiography, ultrasonic, hardness, dielectric, leak testing & eddy current. Services are available at facility or on-site, seven days a week 24 hours a day. Nondestructive testing training & Level III services are also available at training facilities or at customer's plant. Additional capabilities include safety inspections for cranes, materials & personnel lifting equipment. Industries served include aerospace, petrochemical, fabrication, steel erection, utility (nuclear & fossil), military, pipeline, pulp & paper, & ordnance.
JG&A - Metrology Center - Detroit, MI Browse our capabilities profile
Manufacturer, Service Company
Industrial CT scanning services that allow internal and external part inspection in 3D using non-destructive testing methods. CT capabilities include cone beam, line beam and planar CT systems. Before scanning, a feasibility study is conducted to pair each project with the right CT system to ensure cost effective and reliable solutions. Along with scanning, various types of analysis can be conducted including part to CAD, part to part comparison, assembly analysis, void analysis, reverse engineering, wall thickness analysis, GD&T programming, 2D X-Ray and real time X-ray.
Magna Chek - Madison Heights, MI
Distributor, Custom Manufacturer, Service Company
ISO/IEC 17025:2005 certified non-destructive testing (NDT) including inspection services for parts & materials. Capabilities include dye penetrant, eddy current, hardness, magnetic particle, X-ray & gamma ray radiography & ultrasonic testing. Applications include castings, forgings, heat exchanger tubes, shafts, gears, connecting rods, steering arms, yokes, suspension components, aircraft structures & components, welded assemblies, pressure vessels & piping, electronic circuitry & bridge girders.
Jan-Kens Enameling Co., Inc. - Monrovia, CA Browse our capabilities profile
Custom Manufacturer, Service Company
NADCAP accredited non-destructive testing services. Magnetic particle inspection & penetrant inspection services are available. Aerospace components can be tested. Capabilities include refurbishment & prototyping. Meet ASTM-E-1417 & ASTM-E-1444 standards.
Pilkington Metal Finishing - Salt Lake City, UT
Custom Manufacturer, Service Company
Nadcap certified. ISO 9001:2008 registered non-destructive testing (NDT) services including materials & penetrant testing for aerospace applications. Capabilities include anodizing, cleaning, annealing, coating, deburring, degreasing, finishing, hardening, heat treating, inspection, painting, passivating, warehousing, graining, masking, stress relieving, printing, recovery & refurbishing. Meets AAMA, AMS, ASTM, BAC & NAS specifications. ITAR certified. RoHS & ATF compliant.
Inspec, Inc. - Canton, MI Browse our catalog of products
Distributor, Custom Manufacturer, Service Company
ISO/IEC 17025:2005 certified laboratory with 24/7 services & emergency hotline. Complete range of measurement products & services, servicing all industries, in-house or on-site support. Perform calibration & repair services for CMMs, optical comparators, hardness testers, tool pre-setters, tensile testers, machine tools, vision systems, & surface plates. Also, prep, set-up, install & move equipment - across the room or across the country. Hand & precision tool services include calibration, repair & sale of calipers, gage blocks, digital/dial indicators, micrometers, indicators, height gages, height masters, ring gages, plug gages, torque wrenches, scales, digital multimeters, oscilloscopes, durometers, ovens, force gages, pressure gages, weights, viscometers, torque calibrators, load cells & contracers. Supplying part programming & training, part sorting, part verification to CAD or print, contract inspection & layout, scanning, reverse engineering & on-site measurement support services. Sell all new & pre-owned measurement equipment & tools. With an equipment showroom in house that displays all pre-owned equipment for sale. Offer thermocouples, temperature controls, timers & counters, recorders, custom panels & infrared sensors.
Straton Industries, Inc. - Stratford, CT
Manufacturer, Custom Manufacturer, Service Company
Veteran owned ISO 9001:2000 certified non-destructive testing services. OD & ID grinding of bores, journals, actuators, carrier assemblies, shafts, housings, pistons & machining of brake flanges are available. Testing services are available for components including carriers, flanges, gear boxes, hydraulic shafts, landing gear casings, pistons & rotors. AS 9000 compliant.
Peters' Heat Treating, Inc. - Meadville, PA Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008 certified non-destructive (NDT) testing services for metallurgical applications. Services include heat treating, annealing, induction annealing, vacuum annealing, conventional hardening, case hardening, vacuum hardening, atmosphere hardening, induction hardening, nitriding, gas nitriding, carburizing, ferritic nitro carburizing, vacuum aging, vacuum solution treating, black oxide coating, shot blasting & cryogenic treating. Metallurgical services & consulting services are available.
to Compare Suppliers or Email

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified September 2, 2014.

Thomas Register® and Thomas Regional® are part of

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen