Vitec, Inc. - Cleveland, OH
Manufacturer, Service Company
ISO 9001: 2008 certified manufacturer of vibration, temperature & process monitors. Products include continuous vibration monitors, 3 channels & 4 channels vibration monitoring systems. Services include on-site repair, calibration & application engineering services.
vitecinc.thomasnet.com/category/monitoring-...

Vibration Monitors Products
	2110 Monitoring System 438D Vibration Switches (inch/sec) 438R Vibration Switches With Remote Transducer More

PCB Piezotronics, Inc. - Depew, NY
Distributor, Manufacturer, Custom Manufacturer
Full supply of prepolarized condenser microphones and preamplifiers. Powered by a 2-20 mA signal conditioner and standard coaxial cables. The prepolarized designs can also be used with the same constant current source used for ICP® accelerometers, thereby minimizing set-up time. IEC 61094 compliant prepolarized condenser microphones are built around the ICP® sensor technology. Also offers the traditional externally polarized microphones that run off of a 200V power supply.
www.pcb.com/TM_Acoustics.asp

Elliott Group - Locations
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000 certified. Manufacturer of vibration monitors or monitoring systems. Control systems are designed to control turbomachinery systems from the control room or remote location. Controls can be used to display operating data, view/change controller settings, view & adjust alarm/trip settings, view the alarm/trip log, monitor & adjust oil system operation, generate & print trend information, download archived information & print reports & records of system performance. Additional applications include surge control, temperature monitoring, steam turbine governor control & overspeed trip protection.
Brand Names: ELLIOTT
www.elliott-turbo.com/controls.asp

Schenck Balancing & Diagnostic Systems - Deer Park, NY
Manufacturer
Manufacturers portable vibration analyzers (PFT), field balancers & multi-channel monitoring systems to analyze, troubleshoot & correct overall machine vibration & bearing condition. Hardware & software packages & a complete line of accelerometers, transducers.
www.schenck-usa.com

Jamieson Equipment Co., Inc. - Buford, GA
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
Distributor of vibration monitors. Features include LED indicators, adjustable trip-point alarm, compact, rugged & can be installed anywhere. Vibration monitors have 18 VDC to 30 VDC or 115 VAC input voltage. Vibration monitors are used for checking over & under vibration & provide machine status at a glance. Vibration monitors are UL approved.
catalog.jamiesonequipment.com/category/moti...

Vibration Monitors Products
	Vibratory Machine Monitors

IST Instrumented Sensor Technology - Okemos, MI
Manufacturer
Manufacturer of portable & environmental vibration, temperature, & shock meters, detectors, analyzers, instruments, monitors, & recorders. Shock recorder features include built-in triaxial accelerometer, on-board memory up to 4 MB & 8 MB, sliding window overwrite mode, event type memory partition, up to 6 high-speed channels, programmable trigger schemes, automatic offset correction, precision low noise true 10 bit A/D, & vibration controller compatibility for field data replication. Optional measuring capacities include humidity, pressure, strain, & load measurement.
www.isthq.com/Products/MSR3C/tabid/601/Defa...

MTI Instruments, Inc. - Albany, NY
Manufacturer, Custom Manufacturer
Manufacturer of standard and custom vibration monitors. Available as vibration measurement systems. Vibration measurement systems are advanced vibration analysis and trim balancing tools and available with cable sets and accessories. Features 4 vibration channels, 3 speed channels, graphical user interface with touchscreen, large color front panel display, dual processor and built-in diagnostics and self-calibration functions. Capabilities include system maintenance and upgrade services, repair services and calibration services.
www.mtiinstruments.com/products/pbs-4100plu...

Electro-Sensors, Inc. - Minnetonka, MN
Manufacturer
ISO 9001:2000 certified manufacturer of industrial motion monitoring instruments including vibration monitors. Types include stand-alone vibration monitors. Vibration monitors feature measurement of actual vibration & detection of different sources of failure including power loss, motor or gearbox failure, belt slippage or breakage. Features include heavy duty sensing probes, DPDT 10 A relays, remotely mounted control units, fail-safe operations & optional 230 Vac operations. Vibration monitor unit solid state electronics are epoxy encapsulated in metal & require no calibration.
www.electro-sensors.com

Kellett Enterprises, Inc. - Greenville, SC
Manufacturer, Custom Manufacturer
Woman-owned manufacturer of standard & custom vibration isolation & noise control products including pads, shims, bumpers & shock mounts. Types of pads include vibration isolation pads, vibration absorber pads & vibration control & noise dampening pads. Materials used include recycled plastics, acrylonitrile butadiene styrene (ABS) & neoprene. Pads are available in thicknesses of 3/8 in., 1/2 in., 3/4 in. & 1 in. JIT delivery available.
antivibration.kellettent.com/viewitems/all-...

AMETEK Power Instruments - Rochester, NY
Distributor, Manufacturer, Custom Manufacturer
ISO 9001 certified manufacturer & designer of vibration monitoring systems including vibration monitors & instruments. Features include compact portable weatherproof enclosures, 8 input channels, 4 MHz. peak detectors for high resolution measurement with sub-cycle triggering, automated analysis, touch screen display & backlit keyboard. Monitors & instruments are capable of storing up to six months of data. Specifications include operating temperature 32 degrees F to 122 degrees F, humidity 5 to 95 percent non-condensing, dimensions 10 in. H x 16 in. W x 10 in. D & weight 18 lbs. Power monitors also have optional internal battery for continuous recording through power interruptions. Monitors are used for measuring power, harmonics, waveform, flicker & transients in a plant or substation.
Brand Names: Ametek, Meridian
ametek-power.preview.ametekdev.com:8000/pro...

Meggitt Sensing Systems - Wilcoxon Research - Germantown, MD
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000 & AS9100 certified manufacturer of hazardous area vibration monitoring sensors. Vibration sensors are available in various models & specifications including 100 mV/g sensitivity at plus/minus 5 percent, 1 Hz low frequency, 15.0 kHz high frequency, 18 VDC to 30 VDC voltage & 248 degrees F maximum operating temperature.
www.wilcoxon.com/vi_intrinsic.cfm

Neal Systems Inc. - Newtown, PA
Distributor
Distributor & integration of instrumentation for various process measurements, process control, data acquisition, electrical protection & connection for both general purpose & hazardous areas. Types of instruments include vibration monitoring, gas leak detection & gas analysis, hazardous area equipment for intrinsic safety & purge, process measurements for temperature, pressure & flow, liquid analysis measurements, various controllers & indicators, chart recorders, handheld calibrators, process control devices including valves & drives, surge protectors & signal conditioners. Calibration equipment & software for temperature, voltage, current & HART calibrators including replaceable modules, HART-protocol communicators & device management software. Vibration & proximity detection for rotating equipment, mechanical switches, proximity sensing, accelerometer vibration detection, impact transmitters for reciprocating compressors, data analysis displays & indicators.
Brand Names: BlueTree Wireless, Burkert, Byres Security, Chessell, Draeger, Foxboro, HI, L & J Technologies,...
www.nealsystems.com/newsite/

Capacitec, Inc. - Ayer, MA
Custom Manufacturer
ISO 9000 certified custom manufacturer of amplifiers including monitors for vibration measurement applications. Specifications of amplifiers include 0.156 in. to 0.750 in. probe OD, 2 Hz to 128 kHz frequency response, 0.010 in. to 0.197 in. measurement range, plus/minus 2 percent linearity, plus/minus 0.5 percent repeatability, 32 degrees F to 1,832 degrees F operating temperature, 3 m cable length with 3.48 mm OD & plus/minus 5VDC to plus/minus 15 VDC power supply.
www.capacitec.com/Products/Displacement-Sen...

Quality Bearings & Components - QBC - New Hyde Park, NY
Distributor
Distributor of vibration monitors. Available as vibration checkers. Features include portable, compact, built-in probe & button operation. Vibration checkers are used for vibration measurement in 10 Hz. to 1000 Hz. frequency range. Services include ball bearing cleaning, ball bearing relubrication, packaging, designing & inspection. Products are available with 1 year limited warranty. JIT delivery available.
Brand Names: Bega, Betex
www.qbcbearings.com/BuyRFQ/Bega_Monitors_TB...

I & C Sales North, Inc. - Southgate, MI
Custom Manufacturer, Manufacturers' Rep
Mfr's rep. of switches, electronic & mechanical, transmitters, proximity probes, multi-channel monitors & portable calibration shakers.
Brand Names: HI, Metrix, PMC/BETA
www.icsalesnorth.com/vibration.html

Anderson-Bolds - Cleveland, OH
Distributor, Manufacturers' Rep
Stocking distributor of velocity/acceleration vibration monitors. Specifications include velocity range up to 3 in./second, 0 G to 10 G acceleration range & 4 mA to 20 mA DC output current. Features include two adjustable trip points & solid state triacs, adjustable monitor time delays, LED setpoint indicators & NEMA 4 explosion proof enclosures with optional internal or externally mounted accelerometers. CSA Certified. FM approved.
Brand Names: Robertshaw
www.anderson-bolds.com/brands/robertshaw.ht...

Techna-Tool, Inc. - Hartland, WI
Distributor, Manufacturer, Custom Manufacturer
ISO 9001 certified manufacturer of vibration monitors. Available as non-contact tool monitoring systems. Non-contact tool monitoring systems are also used to monitor broken, dull & missing tool.
Brand Names: Techna-Check
www.techna-tool.com/index.php?id=techna_che...

Concept Controls - Calgary, AB
Distributor, Manufacturer, Service Company
Manufacturer & distributor of vibration monitors including human vibration monitors & mechanical vibration monitors. Human vibration monitors such as bio-acoustic simulators, class 1/class 2 audiometric calibration systems, human vibration systems, real-time vibration analyzers & general purpose vibration meters are available. Types of mechanical vibration monitors include real-time vibration analyzers & general purpose vibration meters. Product rentals are available.
Brand Names: Quest
gasdetectors.conceptcontrols.com/category/p...

Edelmann & Associates, Inc. - Minneapolis, MN
Distributor, Service Company
Distributor of temperature and vibration monitors. Wireless predictive condition monitoring systems for rotating equipment are available. Features include continuous monitoring of vibration, temperature and other data alerting operators to alarm conditions via email or telephone, predictive historical trends, FFTs and band alarms and automatic collection, sorting and analysis of data.
Brand Names: Goulds, ITT, ProSmart

MadgeTech, Inc. - Warner, NH
Manufacturer, Service Company
Manufacturer of vibration and shock monitors including data loggers. Available with built in accelerometers and programmable start time and automatic recording. Brake and fragility testing, aircraft turbulence measurement and machinery and assembly line monitoring applications served. Made in USA.
www.madgetech.com/data-loggers/shock.html

The Canada Company - Tulsa, OK
Distributor, Custom Manufacturer, Manufacturers' Rep, Service Company
Mfr's rep. and distributor of vibration meters including monitors. Features include power switches, BNC connectors, peak detect modes, battery powered and digital displays.
Brand Names: Metrix
control-solutions.canadaco.com/item/all-cat...

Vibration Monitors Products
	SETPOINT Machinery Protection System

Dahl-Vaughn, Inc. - Granada Hills, CA
Distributor, Custom Manufacturer, Manufacturers' Rep
Veteran owned distributor of vibration monitors, accelerometers, vibration monitoring systems & dynamic signal analyzers.
www.dahl-vaughn.com

SKF Reliability Systems - San Diego, CA
Manufacturer
Condition Monitoring Systems For Continuous On-Line & Periodic Monitoring Systems

Cole-Parmer Canada Inc. - Montreal, QC
Distributor

Crossbow Technology Inc. - San Jose, CA
Distributor, Manufacturer
Manufacturer & distributor of vibration monitors.