ThomasNet.com

Aircraft Engine Parts in Southern California

Home > Supplier Discovery > Supplier Results for Aircraft Engine Parts




Provide Feedback

Aircraft Engine Parts Suppliers serving Southern California

Displaying 1 to 25 out of 40 results
to Compare Suppliers or EmailServing
Southern California
Located in
Southern California
Advertisement
Advertisement
Advertisement
KL Steven Co. - Rio Rancho, NM (Serving Southern California) Browse our capabilities profile
Custom Manufacturer
Manufacturer of fabricated and CNC machined parts and components for use in aircraft engines. Parts are approved for use by GE Aircraft Engines, Elano Corporation and Hamilton Sundstrand. Products include alternator rotors for aircraft and helicopter jet engines made of A-286, 347 stainless steel, 321 stainless steel, Inconel and 17-4 PH alloys hardened to 47 Rockwell. Also offers splines with a 32 micro finish that are deburred to produce a uniform .005 to .010 radius on all edges.
www.klsteven.com/precision-cnc-machining-se...
Fedtech, Inc. - Saint Paul, MN (Serving Southern California) Browse our catalog of products
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of aircraft engine parts including afterburners. Materials include aluminum, stainless steel, armor plate, tantalum, titanium, tool steel, carbon steel, fiberglass, graphite, brass, bronze, copper, zinc, nylon, plastics, polycarbonate, rubber, cork, felt, foam, gum rubber, neoprene, silicone, urethane, vinyl & nickel alloys. Capabilities include laser cutting tolerances to plus/minus .003, CAD/CAM capabilities, repeatability of plus/minus .001 & abrasive water jet cutting to 12 inch thickness. Services include welding, drilling, tapping, deburring, PEM stud insertion, custom assembly, machining, finishing, heat treating & forming. JIT delivery available.
www.fedtech.com/industries.html
Swiss Wire EDM - Costa Mesa, CA
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2000, AS 9100C & NADCAP certified manufacturer of aircraft engine parts including jet engine parts. Capabilities include cutting of aircraft engine parts up to 48 in. thick, angles up to 30 degrees & corner radii less than 0.001 in. & can process components up to 4,000 lbs. & 60 in. dia. Jet engine parts include 36 in. dia. by 19 in. thick turbine discs. Wire & ram electrical discharge machining (EDM) can be done on conductive materials & exotic metals including aluminum, steel, copper, tungsten-carbide, graphite, titanium & molybdenum. Prototype & production parts are also available.
www.swedm.com/capabilities/capabilities.htm...
LIGI Tool & Engineering, Inc. - Deerfield Beach, FL (Serving Southern California) Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of aircraft engine parts. Aluminum, brass, carbide, copper, magnesium, tungsten, InconelŪ, InvarŪ, KovarŪ, molybdenum, MonelŪ, platinum, niobium and various other metals used. Available in sizes up to 19.5 in. L x 14.5 in. W x 15 in. H with +/-0.0001 in. tolerance. Emergency and rush services available. ITAR registered. On-time delivery.
Bender U.S. - Vernon, CA
Custom Manufacturer, Service Company
ISO 9001 certified machining, repair services & custom fabrication of aircraft engine parts. Additional services include welding, resurfacing, boring, 40 ton lifting capacity, turning to 15 ft. dia., milling to 15 ft. dia., grinding to 30 in. dia. ID & to 10 ft. dia. x 30 ft. OD., 20,000 lbs. balancing capacity & 100,000 lbs. portable balancing capacity. Thermal spraying services also available. Emergency field service available 24/7.
www.benderus.com/Machining/machining.html
C & H Machine - Escondido, CA Browse our capabilities profile
Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of aircraft engine parts. Capabilities include design, reverse engineering, prototyping, CNC machining, assembly, milling, turning, wire EDM, sinker EDM, hole popping, grinding, welding, electropolishing & passivation. Products are AS9003 compliant.
www.c-hmachine.com/aerospace-machining
KLH Industries, Inc. - Germantown, WI (Serving Southern California)
Manufacturer, Custom Manufacturer, Service Company
AS9100/ISO 9001 certified manufacturer of aircraft hardware, accessories and parts. Precision machining capabilities include CNC turning, milling and surface grinding; wire EDM, micro hole EDM drilling and waterjet cutting.
www.klhindustries.com/markets/aerospace-mac...
Holz Rubber Company, Inc. - Lodi, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
Custom manufacturer of rubber products and parts for aerospace and defense applications. Specializes in expansion joints and custom-molded solutions. Capabilities include compression, transfer, and injection molding, bonding, and insert sourcing. Also offers other products including pump parts, traction pads, rubber lining, and rolls. Industries served include mining, agriculture, oil and gas, material handling, food processing, power generation, pollution control, wastewater treatment, and HVAC.
holzrubber.com/about-us/
TORIN Products, Inc. - Columbus, NE (Serving Southern California)
Manufacturer, Custom Manufacturer, Service Company
ISO 9001:2008, AS9100-C, ISO 13485:2003, ITAR Registered contract manufacturer of a large variety of aerospace, aircraft & military/defense machined components & turned parts. Able to manufacture everything from prototype to Kanban blanket orders, at any volume to the highest quality & tolerance standards. Screw machine product types include: adapters, adjusting nuts, end caps, bodies, bushings, cones, contacts, rings, ferrules, firing pins, header shells, hex nuts, housings, guides, lever pins, locating pins, needle valves, ports, pistons, pivot pins, plugs, brobes, retainers, retaining rings, rod actuators, rollers, screw housings, shafts, sleeves, sliders, spacers, spring pins, stems, studs, terminals, valve bodies & washers. Secondary capabilities include centerless grinding & cylindrical grinding, CNC & conventional milling, thread rolling, drilling, chuckers, honing & assembly. Tight tolerance capabilities include: +/-.0002 on lengths. Capable of diameters up to 1 5/8 in. & lengths of 5 in. Materials machined include: aluminum, brass, bronze, beryllium copper, Greek ascoloy, hastelloy, inconel, titanium, kovar, 303, 304, 316, 347, 416, 420, 440, 17-4 PH stainless steels. SPC data can be furnished on customer request.
www.torin.com
F & B Mfg, LLC - Phoenix, AZ (Serving Southern California)
Manufacturer, Custom Manufacturer, Service Company
Hydroforming up to 32" blank capacity, 400-1000 ton "large deep draw" presses, CNC machining & sheet metal fabrication. Total support capabilities. Complete engineering & tool room. ISO 9001:2008 & AS9100 Rev C certified.
www.fbmfg.com
M P Aero LLC - Van Nuys, CA Browse our capabilities profile
Custom Manufacturer, Service Company
Manufacturer of aircraft accessories, engine parts & supplies. Capabilities include cap angle repairing, fabrication, installation, machining up to 40 in. x 120 in., abrasive waterjet cutting & welding.
www.mpaero.com/index.html
Herber Aircraft Service, Inc. - El Segundo, CA
Distributor, Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
AS 9100 certified custom distributor of aircraft accessories parts & supplies including harnesses, hoses, clamps, couplings, dampers, ducts, fittings, flanges, fluid delivery systems, gaskets, mounts, sealing systems & valves. Repair & overhaul services are also available. Applications include military, aviation & industrial.
herberaircraft.rtrk.com/?scid=1629003&rl_al...
SPIROL International Corporation - Locations
Distributor, Manufacturer, Custom Manufacturer
Certified manufacturing to ISO/TS 16949:2009, AS 9100 Rev B, NADCAP AS7108 & NADCAP AC7116/4. Single shims, thin spacers, laminated & edge bonded shims, pump shims, specialty washers & other flat components used for spacing & wear. Fast delivery. No tooling charges.
www.spirolshims.com/precision.html
Borla Performance Industries, Inc. - Oxnard, CA
Manufacturer, Custom Manufacturer
Exhaust Systems; Tube Bending & Fabricating
Aeromax Industries, Inc. - Canoga Park, CA
Distributor, Manufacturer
Aircraft, Engine, Helicopter Spare Parts
California Hydroforming Co., Inc. - City Of Industry, CA
Manufacturer, Custom Manufacturer, Service Company
Hydroforming, Deep Drawing
Century Precision Engineering - Gardena, CA
Manufacturer, Custom Manufacturer, Service Company
Precision Machined Using Bare Metals, Forgings, Castings
Senior Flexonics, Inc., Jet Products Div. - San Diego, CA
Manufacturer, Custom Manufacturer, Service Company
Aicraft Rings
Tele Air International - Oxnard, CA
Manufacturer, Custom Manufacturer
Manufacturer of aircraft engine parts.
Mackenzie Aircraft Parts - Vista, CA
Distributor
Distributor Of Surplus & Hard-to-find Aircraft Parts & Components.
Alpha Machining Products - San Diego, CA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer of screw machine products, tools & fixtures. Prototype & production, precision machining, engineering services.
Valley Precision Metal Products - Valencia, CA
Manufacturer, Custom Manufacturer, Service Company
Suppliers of aircraft engine parts & maintenance services, aerospace & aircraft equipment, parts & supplies. FAA-certified engine repair & modification services. Aircraft display panels including lighting, instruments & control. Metal & sheet metal fabrication, CNC milling & turning. ISO 9001 Standards/FAA & JAA approved.
Thompson Industries - A TSI Company - Hawthorne, CA
Manufacturer, Custom Manufacturer, Service Company
High speed horizontal flexible cell allows for complex, high volume machining. Aluminum vacuum & dip brazing, heat treating services available.
Frazier Aviation, Inc. - San Fernando, CA
Manufacturer, Custom Manufacturer, Service Company
Manufacturer & distributor of metal spinning spare aircraft engine parts including chine caps, longerons, beams, flaps, oil cooler scoops, speed brakes, ailerons, landing gear doors, trim tabs, wing root fairing panel, NLG doors, as well as ground-handling equipment such as intake screen guard assemblies.
Aviation Sourcing Solutions - Santa Ana, CA
Distributor, Service Company
Distributor of aircraft parts and ground support equipment for commercial and military aerospace and aviation applications. Aviation parts include but not limited to tubing, alternators, engine parts, axles, jacks, nose wheels, exhaust components, fuel injection systems, gascolators, carb heat boxes, cowl seals, and baffling material. Military Specs.
to Compare Suppliers or Email
Counties being served: ESSEX, LOS ANGELES
Feedback

Copyright© 2014 Thomas Publishing Company. All Rights Reserved. See Terms and Conditions or Privacy Statement. Website Last Modified April 17, 2014.

Thomas Register® and Thomas Regional® are part of ThomasNet.com.

ThomasNet Is A Registered Trademark Of Thomas Publishing Company.

print screen