Narrow Your Search
 Search Within Results  Locations Served
 California - South
Search Within # Miles Company Type Certifications Ownership Product Detail Expand Your Search
Related Categories
Provide Feedback
|
Medical Device Components SuppliersDisplaying 1 to 25 out of 40 results
Serving: California - Southern
|
|
Fourslide Spring & Stamping, Inc. - Bristol, CT (Serving California - Southern)
Manufacturer, Custom Manufacturer, Service Company
http://www.fourslide.com/fourslide.htm
Company Profile: Custom manufacturer of medical components, stampings & wire forms fabricated from stainless steel, ferrous & non-ferrous alloys .003 to .090 thick & .020 to 2.00 wide. ISO 9001/2000 certified.
|
PEDI - Plastics Engineering & Development, Inc. - Carlsbad, CA
Manufacturer, Custom Manufacturer
http://pediplastics.com/biomedical.html
Company Profile: ISO 9001:2000 certified manufacturer of plastic medical device components & mechanical medical devices. Products include caps, closures, connectors, needle less valve, catheters assemblies, infusion device parts, DNA trays, knee braces, & surgical device parts. Additional products include injection...
|
Scapa North America - Windsor, CT (Serving California - Southern)
Manufacturer, Custom Manufacturer
http://www.scapana.com/marketdetail.jsp?mar...
Company Profile: ISO 9001:2000 & ISO/TS 16949:2002 certified manufacturer of medical grade adhesives for direct skin application including point-bonded polymer coatings, silicon gell products, PVC foam tape & low density polyethylene films.
|
Seal Methods, Inc. - Santa Fe Springs, CA
Distributor, Manufacturer, Custom Manufacturer, Service Company
http://www.sealmethodsinc.com
Company Profile: ISO 9001:2000 & ISO/TS 16949:2002 certified custom manufacturer of precision medical device components & disposable products. Medical applications include wound care & bandages, electrodes, surgical fenestration, draping fabrics, tapes transdermal patches, incise drape components, & bags &...
|
Delstar Technologies, Inc. - Delaware - Corporate Headquarters - Multiple Locations
Manufacturer, Custom Manufacturer
http://www.delstarinc.com/shop.html
Company Profile: An ISO 9001:2000 certified manufacturer of precision medical components including custom-engineered specialty nonwovens, apertured & meltblown fabrics & laminated structures that act as a non-adherent surface on wound care products. Products used as components in finger bandage pad stock, surgical...- Product Catalog
|
Parmatech Corp. - Petaluma, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.parmatech.com/parmatech/profile....
Company Profile: ISO 9001:2000 certified custom manufacturer of ceramic, metal, & powder injection molded medical components & devices. Materials include nickel iron, stainless steel, nickel-zinc-ferrite, silicon iron, aluminum oxide, zirconium oxide, ruby, zirconia toughened alumina, alumina toughened zirconia, &...
|
Component Engineers, Inc. - Wallingford, CT (Serving California - Southern)
Manufacturer, Custom Manufacturer, Service Company
http://www.componenteng.com/medical-compone...
Company Profile: Custom medical device components specialist. ISO 9001 & 13485 registered custom manufacturer of medical device components & assemblies utilizing metal stamping, CNC machining, & tube fabrication.- Capabilities
|
Quick Draw & Machining, Inc. - Ventura, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.quickdraw.com/medical.html
Company Profile: Custom manufacturer of medical device components. Capabilities include prototyping, engineering, part design & development & 3D modeling. Services include metal stamping, hydroforming, deep drawing, plating, laser welding, heat treating & CNC machining. Industries served include aerospace,...
|
Metal Craft Machine & Engineering, Inc. - Elk River, MN (Serving California - Southern)
Custom Manufacturer, Service Company
http://www.metal-craft.com/
Company Profile: ISO 9002 certified custom manufacturer of medical device components such as precision medical components, precision swaged medical components & swiss medical components. Medical components include fine precision instruments, larger tools & replacement joints. Capabilities include CNC & manual...
|
American Precision Gear Co., Inc. - San Carlos, CA
Custom Manufacturer
http://americanprecision.thomasnet.com/item...
Company Profile: Custom manufacturer of gears including medical device, biomedical, aircraft & aerospace gears, custom & special gears, marine gears, military specification gears & precision gears. Size ranges from .05 in. to 48 in. & from 2 D.P. to 250 plus D.P. Materials used include alloy steels, stainless...
- Medical Device Components Capabilities:
- Custom Ring Gears
- Custom Helical Gears
- Custom Worm Gears
- More Info
|
Quality Systems Integrated Corporation - San Diego, CA
Distributor, Manufacturer, Custom Manufacturer
http://qsic.rtrk.com/?scid=1207860&rl_alt=h...
Company Profile: ISO 9001:2000 certified contract manufacturer of medical device components. Medical device components are suitable for industrial & commercial applications. RoHS compliant.
|
Gambit Corporation - Rohnert Park, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.gambitcorp.com/index.html
Company Profile: Custom original equipment manufacturer (OEM) of mechanical & precision medical components specializing in assemblies, pins, wires, brackets, connectors, stampings, connectors, clamps & clips for electric & electronic components. Materials worked with include platinum & silver alloys, tungsten,...
|
IJ Research, Inc. - Santa Ana, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.ijresearch.com/manufacturing/med...
Company Profile: Manufacturer of ceramic medical assemblies. Includes electrical feed throughs, capacitors, implants, permanent implants, biomedical sensors, 10,000 cycle autoclaves optical components, endoscopes with glass & sapphire, & surgical ceramic knives. Applications for permanent implants include...
|
Advanced Machining & Tooling, Inc. - Poway, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.amtmfg.com/
Company Profile: ISO 9001:2000 & AS 9100:2001 certified custom manufacturer & distributor of medical device components, equipment & supplies. Materials include aluminum, bronze, beryllium copper, beryllium nickel, brass, carbide, copper, copper tungsten, Inconel®, Hastelloy®, magnesium, molybdenum, nickel, niobium,...
|
Vacco Industries, Photofabrication Product Group - El Monte, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.vacco-etch.com/screens_meshes.ht...
Company Profile: ISO 9001:2000 & AS 9100 certified manufacturer of miniature & ultra fine wired medical device components. Products include screens, meshes, filtration & micro fluidic devices. Capabilities include marking, plating, special packaging, micro laser machining, diffusion bonding, embossing, differential...
|
Century Rubber Co. - Bakersfield, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.centuryrubber.com/capabilities/
Company Profile: ISO 9001:2000 certified custom manufacturer of precision custom medical device components. Materials include silicone, fluorosilicone, Viton®, EPDM, neoprene, butyl, isoprene, nitrile, natural rubber, SBR, millable urethanes & AFLAS®. Fabrication methods include homogeneous molding, die cutting,...
|
C & H Machine - Escondido, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.c-hmachine.com
Company Profile: High-tech EDM job shop, CNC wire EDM machines. Capabilities include high-speed small hole drilling & CNC capabilities. CAD/CAM system. Extensive machine shop capabilities to include grinding & CNC milling & turning.
|
Paris Precision, Inc. - Paso Robles, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.parisprecision.com/cap_machining...
Company Profile: ISO 9001:2000 certified. Custom fabricator of medical equipment, supplies & device components. Materials include carbon steel, stainless steel, aluminum, brass & copper. Capabilities include CMM, shearing, notching, punch pressing, press braking, milling, wire EDM, drilling, tapping, lathe work,...
|
Pomona Precision Grinding - Pomona, CA
Custom Manufacturer, Service Company
http://www.pomonaprecisiongrinding.com
Company Profile: Medical machining services for machined, mechanical, miniature & precision medical components. Can service various materials for medical applications including heat treated & non-heat treated materials, stainless steel, inconel, aluminum, bronze, cast iron, hastelloy copper, aluminum bronze,...
|
Delta Hi-Tech - Chatsworth, CA
Manufacturer, Custom Manufacturer, Service Company
http://deltahi-tech.com/services_deltahitec...
Company Profile: ISO 9001:2000 certified custom manufacturer of medical device components. Products include housings, hardware, turnkey assemblies, screw machined parts, mini Swiss parts & carts. Capabilities include shearing, cutting, drilling, turning, tapping, CNC lathe cutting, grinding, turret punch pressing,...
|
Valencia Mold - Valencia, CA
Manufacturer, Service Company
http://www.valenciamold.com/index.php?optio...
Company Profile: Contract manufacturer of custom plastic injected molded & blow molded parts including medical components. Specializing in all types of custom plastic injection molds, blow molds & die cast molds & parts including aluminum molds, steel production molds, mass production hardened steel molds, aluminum...
|
Strong Plastics Engineering, Inc. - Tarzana, CA
Manufacturer, Custom Manufacturer
http://www.strongplastics.com/products.html
Company Profile: Custom manufacturer of medical device components made from plastic. Capabilities include fabricating, CAD/CAM designing, engineering, product development, blow molding, injection molding, silk screen printing, decorating, labeling, mechanical testing, chemical analysis, research & development &...
|
Marples Gears, Inc. - San Gabriel, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.marplesgears.com/
Company Profile: Manufacturer of mechanical components for medical devices including high-precision fine-pitch gears upto AGMA (American Gear Manufacturers Association) Class 13 specifications with 12 to 200 DP & metric pitches & 2 to 0.3 MOD. Gears include spur, helical, worm & internal, serrations, splines,...
|
Accu-Sembly, Inc. - Duarte, CA
Manufacturer, Custom Manufacturer, Service Company
http://www.accu-sembly.com/index.html
Company Profile: ISO 9001:2000 certified custom manufacturer of medical device components. Capabilities include lead free SMT & thru-hole assembly, mechanical assembly, electrostatic discharge (ESD) free manufacturing, visual optical & X-ray inspection, testing & potting, prototyping, short production runs & large...
|
Dalco Screen & Pad Printing - Pomona, CA
Manufacturer, Custom Manufacturer, Manufacturers' Rep, Service Company
http://www.dalcoscreenprint.com
Company Profile: Custom printing on medical devices & components. Imprinting on plastic, metal, glass, silicone & rubber medical components. Printing on injection molded parts, syringes, vials, beakers, ampoules, catheter tubes & medical tubing using medical grade inks. Close tolerance printing.
|
|
