Accu-Chek, Inc. - Georgetown, IN (Serving Tennessee)
Service Company
ISO/IEC 17025 accredited calibration services of all inspection, measuring, & test equipment (IMTE) to either manufacturer’s specifications, Federal/Military/ANSI specifications or, if requested, to customer requirements. All IMTE's are calibrated using written procedures & standardized data sheets. All work is performed by trained technicians & is continually monitored by both internal and external ISO 17025 auditors.
www.aciquality.com/Services.html

Carlton Scale - Locations
Distributor, Service Company
ISO/IEC 17025 calibrating services, technicians are factory trained and are qualified to work on-site with all makes and models of scale equipment 24/7, 365 days. All operations are outfitted with NIST traceable test weights that also comply with state certification requirement. Distributor of weighing instruments, scales & controls.
Brand Names: GSE, LTS Forklift, MSI Scales, Mettler-Toledo Scale, Rice Lake Bearing, Sartorious, VWR
www.carltonscale.com/service-calibration/in...

Precision Calibration Systems, LLC - Morristown, TN
Distributor, Service Company
ISO/IEC 17025 accredited electronic & optical on-site calibrating services. Available for height, ring & pressure gages, calipers, temperature sources, indicators, height & set-up masters, micrometers, optical comparators & liquid in glass & digital thermometers. Gage designing & repairing & consulting services are also available.
www.pcsllctn.com/calibration/

B & D Industrial - Locations
Distributor, Service Company
Calibration services. Capabilities include alignment, conveyor, gear, coupling & bearing installation, training, engineering, technical, bearing & coupling inspection, reconditioning & repairing. MSHA & OSHA certified.
bdindustrial.rtrk.com/?scid=1325234&rl_alt=...

Industrial Measurement - Rawson, OH (Serving Tennessee)
Service Company
Engineering & inspection services include manufacturing machine alignment & machine tool calibration Services. Utilize the FARO Laser Tracker to inspect all types of machines & equipment with minimal disassembly & down time. The Laser Tracker is a portable CMM & has a working range of 115 foot radius & can achieve .001 in. 3D single point accuracy. Used to Inspect the alignment & geometry of used machine tools & manufacturing equipment before purchasing. Inspect the alignment & the positioning of a machine's foundation lay-out for proper mounting of the machine after the concrete is poured. Inspect the alignment of new or used machines during installation or relocations. Inspect large machined parts & assemblies to the CAD drawing. All equipment is certified & traceable to NIST.
www.ims-ohio.net/machine-tool-laser-calibra...

Calibration Services Capabilities
	Machine Tool Laser Calibration and Machinery Alignment Services

Intersky Precision Instruments, Inc. - Memphis, TN
Service Company
Calibration Of Test Equipment Traceable To NIST Standards

Universal Air Repair, LLC - Cordova, TN
Service Company
ISO/IEC 17025:2005 certified on-site calibrating services for electronic measurement & test equipment. Capabilities include calibration & repair for various instruments including hand pumps, batteries, fuses, shutoff valves, anti-collision lights, centrifugal fans, isolation panel test sets, pressure testers, dynamometers, motors, actuators, ovens, flowmeters, audio oscillators & digital power meters. Industries served include aviation, manufacturing, research & development & biomedical. FAA & EASA certified.

Absolute Weighing, Inc. - Powell, TN
Distributor, Service Company
ISO/IEC 17025: 2005 certified calibration services for commercial and insdustrial weighing systems.

Vacuum Technology Incorporated - Oak Ridge, TN
Manufacturer, Custom Manufacturer
Manufacturer Of NIST-Traceable & A2LA-Accredited Calibrated Leaks For All Gases, Leak Rates & Leak Detectors; NIST-Traceable Recalibrations & Repair Of Leaks; Sniffer Detector Calibrators; Refrigerant Leak Standards; Helium & Refrigerant Leak Testing Systems

Metro Services, Inc. - Chattanooga, TN
Distributor, Service Company
Calibration services for temperature & humidity instruments including meters. Products that can be calibrated include RTD probes, chart recorders, data collectors, infrared sensors, psychrometers, temperature controllers, temperature indicators, transmitters & dial, digital & infrared thermometers. Capabilities include combustion auditing, CCTV furnace inspection, project management, system upgrade & rebuilding, burner tune-up, gas booster inspection, maintenance & repair, equipment start up, furnace upgrading & retrofitting, thermal imaging, process monitoring, mechanical & electrical inspections, combustion & safety training, waste heat recovery, propane tank flaring, environmental emission testing & HVAC facility maintenance & project engineering. 24 hour on-call maintenance & repair service available.

J.A. King & Co, Inc. - Chattanooga, TN
Distributor, Service Company
Distributor of custom designed weighing equipment & force measurement devices including analyzers, balances, counters, dynamometers, gages, indicators, meters, sensors, transducers & tensiometers. Other products include bar code equipment, batching systems, control systems, instruments, machinery & reels. Manufacturer of textile testing products for all fabric & yarn needs. Services include calibration & repair of industrial measurement equipment including electronic testing equipment, gages, load cell & scales.

Ams Corporation - Knoxville, TN
Manufacturer, Service Company
Temperature & Pressure Sensors In Nuclear Power Plants

Metrology Solutions, Inc. - Cookeville, TN
Service Company
ISO 17025: 2005 certified calibration services. Services include calibration of gages and OGP equipment. Also offer emergency services.

Glastonbury Southern Gage - Erin, TN
Manufacturer, Custom Manufacturer
Calibration services. Capabilities include pieces in sizes up to 0.000050 in. with 0.000020 in. to 0.000050 in. straightness, length up to 9 in., slip fits between ID & OD, & clearances up to 0.000020 in.

Schmiede Corp. - Tullahoma, TN
Manufacturer, Custom Manufacturer, Service Company
AS 9100:2004 & ISO 9001:2000 certified woman-owned calibration services with conventional mechanical alignments. Laser calibration is done for machine tools & metalworking machinery for flatness, parallelism, straightness, leveling, ballbar diagnostics, positional tolerance, acceleration & deceleration, feedrate, backlash, servo mismatch & scale errors available. Industries served include automotive, chemical, electronic, textile, aluminum mills, nuclear components, glass fabricators, power generation & manufacturing. Meet Military Specs.

Electronic Metrology Laboratory, LLC (EML, LLC) - Franklin, TN
Service Company
EML Calibration Services is ISO 9001:2008 registered, ISO 17025:2005 registered and certified 8(a) BD and SDB by the United States Small Business Administration. We provide calibration services for electronic, physical and dimensional test and measuring equipment.

R & R Instrumentation LLC - Hendersonville, TN
Service Company
Testing laboratories

Modus Metrology Services - Knoxville, TN
Service Company
NIST traceable, primary level calibration services in physical, electrical & dimensional disciplines & dimensional inspections services.