AC Transformer

Trip CharacteristicsSwitching and AcknowledgingIndication and ConfigurationElectronic Circuit Breaker

Reliably Increasing Power Supply AvailabilityIndicationRedundancy ModuleHigh Overload Capability

Common (splice) up to 8 solid or stranded conductors in the same connectorOption: mount to chassis or DIN rail via separate carrierThe Pushwire® connection clamps stranded or solid copper conductorsCross section up to 10 AWGSave up to 50 % in wiring time over twist-type More... connectors Less

Common (splice) up to 8 solid or stranded conductors in the same connectorOption: mount to chassis or DIN rail via separate carrierThe Pushwire® connection clamps stranded or solid copper conductorsCross section up to 10 AWGSave up to 50 % in wiring time over twist-type More... connectors Less

Pushwire® Connectors for Junction Boxes, (solid and stranded wire)The Wago 773 Series for applications in hazardous areas is an extension of the Wago Pushwire® connectors product group and has the same benefits in installation, technology, and reliable connection More... as the standard 773 Series for commercial and residential applications. Less

Double-potential terminal block with double marker slot centered on terminal block. Double-potential terminal blocks are space savers. Two independent feedthrough circuits are placed in one insulated housing on one level in just 4.2 mm. This achieves a width of just More... 2.1 mm/0.083 in versus standard through terminal blocks. Input and output contacts of one circuit are placed on the same side of the terminal block. Both circuits can be individually marked according to input and output. Less

The perfect in-line connector for solid-to-stranded wireAlso with double service connectionTool-free connection

Mounting foot for DIN Rail mounting.

For Fastening Screw 3 mm /0.118 in φ or For Self Tapping Screw 2.9 mm / 0.114 in φ from Top.

Carrier rail 35 x 7.5 mm, acc. to EN 60715, IN 76 A (referred to a length of 1 m).

Wire cutter acc. to VDE for copper and aluminum wires.

Multi-pole; in adjacent or alternateCustomize by breaking off individual contact legs

Protective warning marker, with high-voltage symbol, black, for 5 terminal blocks

IN = IN terminal block, light gray 1-2-3-4-5-6

Modular PCB terminal blocks with CAGE CLAMP® connection, screwdriver actuation parallel or perpendicular to conductor entryVersions with Ex approvalFor custom PCB terminal strip assemblies45° conductor entry angle permits a wide range of applications and wiring More... optionsSet to metric or inch pin spacing by compressing PCB terminal strips or pulling them apart Less

Modular PCB terminal blocks with screwdriver-actuated CAGE CLAMP® for custom PCB terminal strip assembliesVersions with Ex approvalSpacers for higher voltage applicationsDouble solder pins for high mechanical stabilitySpace-efficient configuration of terminal strips More... when placed behind each otherIntegrated testing tap Less

IN = IN terminal block, light gray 1-3-5

Multi-pole; in adjacent or alternateCustomize by breaking off individual contact legsPush-in type jumper for over longer distances, across multiple levels, or around components

Test plug adapter, for 4 mm Ø test plugTest plug adapters for 4 mm banana plugs are suited for 2000 to 2016 Series.

Testing tap, for max. 2.5 mm2Testing taps are suited for 2000 to 2016 Series, providing tool-free connection of test wires up to 12 AWG (2.5 mm²).

Test plug, with 500 mm cable

WMB Multi marking system, 10 strips with 10 markers per card.

Insulation stop, 5 pcs/strip

Easily combine conductors of varying sizesCost-saving, modular approach to power distribution

Spacer module, can be snapped together, e.g., for bridging commoned terminal blocks

Banana plug, for socket 4 mm Ø color mixed

TOPJOB® S L-type spacer module Spacer module, can be snapped together, e.g., for bridging commoned terminal blocks

Adjacent jumper for continuous commoning, insulated

Slim style adjacent, alternative or customizeTwo jumpers fit within a single jumper row

Slim style adjacent, alternative or customizeTwo jumpers fit within a single jumper row

Blind plug for carrier terminal blocks, indicates a disconnection

Fuse terminal blocks for automotive, blade-style fuses

Diode module, with 1N4007 diode.

1-conductor female plug with shorter locking lever, suitable for Ex nA applications, for insertion into carrier terminal blocks, with coding fingers.According to EN 61984, connectors without current interrupting capacity shall not be mated and unmated when live or under More... load. Less

Multilevel installation terminal block, with N-disconnect slide link

Multipole operating tools for front-entry terminal blocks (insulated)

TOPJOB® S L-test plug module, can be snapped together

Screwless end stop, for DIN 35 rail

Marker carrier, for jumper slots 2002 Series

Comb-type jumper bar, can easily be inserted into the wire entry.

Marker strip, white, plain for central marking.

Angled support bracket, without screw

Disconnect Plug for Carrier Terminal Blocks

End and separator plate, without use of lock-out seal.

Locking cover, mechanically locks multiple links.

Interlocking link, mechanically locks multiple links, 1 8-pole m/3'3" long

Finger guard, touch-proof cover protects unused conductor entries and jumper slots

Shorting link, (5 x 20) mm, allows the fuse plug to be used as a disconnect plug.

Three-phase set, with 185mm2 high-current terminal blocks

Power tap, IN 24 A, with 500 mm cable, for terminal blocks 16 mm2 (283/783 Series) and 35 mm2 (285/785 Series)

Carriers with 6 Coding Pins, for coding female plugs

Straight busbar, tin-plated, 1000 mm long, copper (10 x 3) mm

Lock-out, prevents reclosing of slide link, snap-on type

Compact PCB terminal strips with CAGE CLAMP® connection and screwdriver actuation parallel or perpendicular to conductor entryDouble solder pins for high mechanical stability233 Series with push-buttons

PCB terminal strips with screwdriver-actuated CAGE CLAMP®High-density, double-deck design for space-efficient wiring of multiple conductors in confined areasCustom marking for all termination levelsPCB terminal strips with commoning strips for potential distribution More... Less

PCB terminal strips with screwdriver-actuated CAGE CLAMP®High-density, triple-deck design for space-efficient wiring of multiple conductors in confined areasCustom marking for all termination levelsPCB terminal strips with commoning strips for potential distribution More... Less

PCB terminal strips with screwdriver-actuated CAGE CLAMP®High-density, quadruple-deck design for space-efficient wiring of multiple conductors in confined areasAngled conductor entry and CAGE CLAMP® actuation streamline operationCustom marking for all termination More... levelsPCB terminal strips with commoning strips for potential distribution Less

PCB terminal strips with screwdriver-actuated CAGE CLAMP®Vertical conductor entry and operating direction for space-saving positioning/groupingPress-in technology saves costs - no additional soldering process required

PCB terminal strips with CAGE CLAMP® connection and top-of-unit screwdriver actuationPin and dimensions compatible with screw-type terminal blocks of similar designPCB terminal strips may be positioned adjacently without losing any poles

Terminal strips are just 8.1 mm tall and feature an innovative, locking slide actuated CAGE CLAMP®Several clamping units can be held open simultaneouslyEasy termination of stranded conductors in tight spaces (e.g., bus connectors)

Terminal strips with push-buttons and CAGE CLAMP® connectionDouble solder pins for high mechanical stabilityIdeal for in-the-field wiring thanks to simplified push-button actuationConvenient, tool-free operation233 Series without push-buttons

Terminal strips with push-buttons and CAGE CLAMP® connectionDouble solder pins for high mechanical stabilityIdeal for in-the-field wiring thanks to simplified push-button actuationConvenient, tool-free operation

PCB modular terminal blocks and terminal strips with push-buttons and CAGE CLAMP® connectionVersions with Ex approvalSet to metric or inch pin spacing by compressing PCB terminal strips or pulling them apartIdeal for in-the-field wiring thanks to simplified push-button More... actuationConvenient, tool-free operation Less

PCB modular terminal blocks and terminal strips with push-buttons and CAGE CLAMP® connectionVersions with Ex approvalSet to metric or inch pin spacing by compressing PCB terminal strips or pulling them apartIdeal for in-the-field wiring thanks to simplified push-button More... actuationConvenient, tool-free operation Less

PCB modular terminal blocks and terminal strips with push-buttons and CAGE CLAMP® connectionVersions with Ex approval Set to metric or inch pin spacing by compressing PCB terminal strips or pulling them apartIdeal for in-the-field wiring thanks to simplified push-button More... actuationConvenient, tool-free operationVersions with angled push-buttons for simple top-of-unit actuation Less

High-current PCB terminal strips with lever-actuated CAGE CLAMP®Tool-free opening and closing - fingers open/close leversSeveral clamping units can be held open simultaneously - convenient for terminating multi-core cablesTwo solder pins per contact point for high More... mechanical stability600 V UL for 12.5 mm pin spacing Less

High-current PCB terminal strips with lever-actuated CAGE CLAMP®Tool-free opening and closing - fingers open/close leversSeveral clamping units can be held open simultaneously - convenient for terminating multi-core cablesFour solder pins Per contact point for More... high mechanical stability600 V UL for 15 mm pin spacingPin and dimensions compatible to high-current, screw-type terminal blocks Less

Two-conductor PCB terminal strips with screwdriver actuation and Push-in CAGE CLAMP® connectionDouble entries for supply and power distributionSimple, reliable connection via clamping units featuring individual operating slotsSimple, push-in termination of solid More... and ferruled conductors Less

Two-conductor PCB terminal strips with screwdriver actuation and Push-in CAGE CLAMP® connectionDouble entries for supply and power distributionSimple, reliable connection via clamping units featuring individual operating slots600 V UL per UL 1059Simple, push-in More... termination of solid and ferruled conductorsMarker slot for Mini-WSB and WMB markers Less

THR PCB terminal blocks with push-buttons and Push-in CAGE CLAMP®Push-in termination of solid and ferruled conductorsConvenient termination/removal of fine-stranded conductors via push-buttonsJust 4.5 mm tallAvailable in tape-and-reel packaging for automated assemblyAlso More... suitable for wave solderingFor SMD version Less

THR PCB terminal blocks with push-buttons and Push-in CAGE CLAMP®Push-in termination of solid and ferruled conductorsConvenient termination/removal of fine-stranded conductors via push-buttonsJust 5.6 mm tallAvailable in tape-and-reel packaging for automated assemblyAlso More... suitable for wave solderingAssemble terminal blocks without pole lossFor SMD version Less

Compact PCB terminal strips with push-buttonsPush-in termination of solid conductorsTermination/removal of fine-stranded conductors via push-buttons45º conductor entry angle provides easy, space-saving wiringCustom color combinationsTerminal strips also available More... with spacers upon request Less

Low-profile PCB terminal strips with PUSH WIRE® connection and screwdriver actuationPush-in termination of solid conductorsDouble solder pins for high mechanical stabilityConductor removal via (2.5 x 0.4) mm screwdriver235 Series with push-buttons

Terminal strips with push-buttons and Push-in CAGE CLAMP® connectionPush-in termination of solid and ferruled conductorsFlush-mount push-buttons that close with minimal force for convenient termination/ removal of fine-stranded conductorsConvenient, tool-free operationVersions More... with/without test slots and spacersVersions available with custom internal commoning (factory assembly), e.g., commoning ground conductor Less

PCB terminal strips with push-buttons and Push-in CAGE CLAMP® connectionPush-in termination of solid and ferruled conductorsA large conductor entry accommodates conductors with a cross-section up to 12 AWG with an insulation diameter up to 4.2 mmTerminal strips More... with spacers to increase pin spacingVersions available with custom internal commoning (factory assembly), e.g., commoning ground conductor Less

Push-in termination of solid and ferruled conductorsConvenient termination/removal of fine-stranded conductors via push-buttons235 Series available without push-buttons

Modular PCB terminal blocks with PUSH WIRE® connection and screwdriver actuation for custom terminal strip assembliesPush-in termination of solid and ferruled conductorsTest socket for 2 mm Ø test plugSave space on the PCB, just 8.9 mm deepTwo-conductor versions More... Less

PCB terminal strips with PUSH WIRE® connection and screwdriver actuationDouble-conductor connection provides top-entry (vertical) and/or side-entry (horizontal) wiringPush-in termination of solid conductorsDouble entries for power supply and potential distribution More... Less

PCB terminal blocks with PUSH WIRE® connectionPush-in termination of solid conductors - low insertion forcesJust 6.6 mm tallConductor removal via disconnection tool or by twist and pull

Compact Combi PCB terminal blocks - streamlined for automated wiring in the lighting industryLow conductor insertion forcesPUSH WIRE® and IDC connections - ideal for automated wiring systems

Compact PCB terminal blocks with push-buttons and PUSH WIRE® connectionTop-of-unit, push-button actuation and conductor termination save space on the PCBPush-in termination of solid conductorsTerminal blocks can be arranged side-by-side without loss of poles.

Modular PCB terminal blocks with screwdriver-actuated CAGE CLAMP®Power circuit disconnection via knife disconnect, e.g., for regular testing and measuringTest sockets on both sides of knife disconnect for 2.0 mm or 2.3 mm Ø test plugs2- and 3-conductor PCB More... terminal blocks for distributing potentials independently of PCBVersions with removable knife disconnects available upon request Less

3-Phase Power Measurement; 480 VAC 1 A;optional: external Temperature; 480 VAC 5 A

4-channel analog output; 0 to 10 VDC

The DC Drive Controller is a single-channel, intelligent positioning controller for 24 VDC motors up to 5 A with incremental position feedback.Three 24 V inputs record the limit switches and a preset signal.An incremental encoder interface evaluates signals from the More... position transmitter and determines actual value.Current reduction is possible via PWM.As an option, the motor voltage can be supplied separately. Less

The digital input module receives control signals from NAMUR proximity switches (per DIN EN 60947-5-6) from the field side. Each channel of the sensors is supplied with a short-circuit-protected voltage of 8.2 V. A short circuit or a wire break is indicated by an error More... message via 1 bit in the processor image and a red LED.The green LED indicates the input status:Signal current (0) LED offSignal current (1) LED onElectrically isolated field and system levels Less

The Bluetooth® Transceiver enables wireless exchange of process data with up to seven other devices using Bluetooth® 2.0 radio technology. Interoperability with Bluetooth® devices is provided via the Bluetooth® PAN and SPP profiles and is not restricted More... to any one manufacturer.The module's extended diagnostic functions include cyclic and acyclic state information. For quick on-site diagnostics, main information on operational status and radio connection is also displayed via 8 LEDs. Less

With a CAN Gateway, a CAN bus can be installed as a sub-bus beneath a fieldbus coupler or fieldbus controller. It enables special sensors/actuators that are only available with the widely spread CAN bus to also be integrated under other bus systems. Function blocks More... allow the gateway to read and write higher-protocol telegrams (e.g., CANopen).You can select from three different operating modes. Less

The 753-620 DALI Multi-Master DC/DC Converter is designed to supply a 753-647 DALI Multi-Master Module.The 753-620 DC/DC Converter is supplied via 24V power jumper contacts.Cable bridges connect the DC/DC Converter to the DALI Multi-Master Module.

2nd Generation, 12 MBd, extreme

3rd Generation, extreme

D-Sub, extreme

COMPACT Splicing Connectors; 2-conductor connector; with operating levers; Maximum ambient operating temp. 85 ºC

3rd Generation, SD card slot, extreme, optional: telecontrol

640/832 KB program/RAM, D-Sub, extreme