COVID-19 Response Suppliers

ISO 9001:2015 certified. We supply parts to help produce the following COVID-19 response equipment: medical UV sterilizing equipment, hand sanitizer containers, respirators and ventilators. We also extruded and slit nylon, HDPE, LDPE, nylon MDS, acetal and polypropylene. If your part is needed in the medical field, we are rushing each order. Most take less than one week, depending on the material needed. Made in the USA.

www.newprocess.com/

Custom manufacturing available for component parts for the production of in-demand personal protective equipment (PPE) and other coronavirus response related products.

www.vanguardproducts.com/

GGB is a manufacturer of plain bearings and tribological materials that can and have been used in medical devices where movement is needed. During the COVID-19 crisis, we can service customers who manufacture compressors, hospital beds, examination tables, fluid dispensing equipment, medication delivery equipment, dialysis machines, compressor-based ventilators, and more. Where there is a moving part, GGB can help with a solution.

www.ggbearings.com/en

We manufacture a full line of protective caps, plugs and grips that are very commonly used on many of the ventilators, filters, hospital beds/furniture and equipment that are required at this time. We can expedite lead-times and offer discounted pricing to help in the manufacturing of the goods and equipment that is in current demand. Lead time is 1-3 weeks.

www.mocap.com

We are suppliers of in demand materials or component parts that can be used in the production of COVID response related products. Products include ventilators. Capabilities include rapid prototyping, 3D printing, manufacturing, and design.

www.precipart.com/

We are ramping up our production of several essential rubber components for ventilator manufacturer Ventec Life Systems. Ventec recently announced plans to partner with GM to increase the output of these crucial units in response to the COVID-19 pandemic.

We are supplying essential adhesive, sealant, coating, encapsulation and impregnation compounds for medical device assembly applications. We provide adhesive solutions and technical expertise to both established medical device manufacturers, as well as for companies newly entering the market in response to urgently needed equipment and protective gear. Offering medical grade compounds that meet two widely accepted standards, USP Class VI for biocompatibility and ISO 10993-5 for cytotoxicity, and feature other essential properties such as sterilization resistance and food grade epoxy adhesives.

www.masterbond.com/

We can offer precision sheet metal components out of stainless steel, red metal (Copper, brass, beryllium), rubber, plastic, glass, granite, and other substrates in response the Covid-19 outbreak.

www.microetchtech.com/

We can supply threaded inserts for plastics (used in respirators, ventilators, left ventricle assist systems (LVAS), portable defibrillators, biohazard boxes, needle disposal boxes, vacuum pump housings, MRI catchment trays, surgical blade holders), compression limiters (used in mounting lead shield in CAT scanners, vacuum pump housings, medical device housings), coiled spring pins (used in respirators / ventilators, hospital beds, exam tables, surgical devices, articulating hinges in surgical tools, test tube centrifugal devices), slotted spring pins (used in respirators / ventilators, hospital beds, exam tables, surgical devices), solid pins (Used in surgical devices, articulating hinges in surgical tools), spacers (used in hospital trolley wheels, surgical devices, conveyors, wheel chairs, medical chair arm rests) and shims (used in respiratory ventilators.)

www.spirol.com/

We make a wide variety of precision orifices used to control flow rate of air and other gases in ventilators, anesthesia and respiratory therapeutic devices. We are open for business and welcome you inquiries. Lead time is less than a week.

www.okeefecontrols.com/

We are answering an unprecedented call to manufacture all kinds of COVID-19-related sheet-metal, machined and 3D parts and prototypes for companies across the nation.

www.prototek.com/

Our custom manufactured, cold headed metal parts and fasteners can be used in many in-demand COVID-19 components. We produce high temperature precious metal tips that are used in the fiber manufacturing of HEPA filters. Our other components can be used in medical devices, electrical testing equipment, ventilators, and more. ISO 9001:2015 certified and made in the USA.

www.clrivet.com/

We are a global supplier of medical device adhesive solutions used in the manufacture of ventilators, respiratory support masks, breathing masks for airway management, laryngoscope and tracheal intubation tubing, pulmonary ventilation, and artificial lung ventilation. In response to COVID-19 we have expanded our manufacturing hours to support emergency production.

dymax.com

We manufacture sealing fasteners. Types we make include sealing screws, nuts, washers and bolts. We make these for medical ventilators as well as ECMO systems, which are crucial to the COVID-19 response.

zago.com/

We design and manufacture custom electrical transformers and inductors for power electronics applications. Our components can be used by medical OEMs in the production of COVID-19 response related products.

www.ecraftsmen.com/

We are a manufacturer of high quality vacuum evaporation sources made from tungsten, tantalum, molybdenum and niobium materials. We offer high purity materials like gold, silver, nickel, titanium, chromium, silicon monoxide, and zinc sulfide in a variety of shapes, sizes and purity. We also offer a wide selection of crucibles, E-beam liners, and sputtering targets in pure materials and alloys. Our equipment offerings include low voltage, high current power supplies, inert gas purifiers, high current feed-throughs, cables, lugs, and other vacuum accessories. Many of these products are used in the research and development of medical devices, optical equipment, energy storage and sources, defense and communications equipment and systems. Can be used for COVID-19 response device research.

Contract manufacturing - custom sheet metal components and assemblies for medical devices (e.g., ventilators, etc.). Lead time is 3 to 6 weeks.

www.precisionengineering.com/

We make instrument robots for medical testing and diagnostic instruments. Our xyz stages enable life science and diagnostic companies to accelerate basic research by automating liquid dispensing and micro plate positioning within their machines for high-throughput analysis.

www.tpa-us.com/

We make parts that go into medical devices needed now, such as pulmonary intubation devices.

metalcutting.com/

Custom manufacturer of automation, press die and mold components suitable for industrial and commercial applications. Product range includes: Actuators, absorbers, adhesives, adjusters, aluminum extrusions, angles, ball screws, ball bearings, bars, belting, blocks, bolts, brackets, bumpers, bushings, blades, casters, chains, connectors, clamps, collars, controllers, couplings, dampers, detergents, button dies, doors, fittings, gears, handles, handwheels, linear guides, locating pins, micrometer heads, heaters, hinges, hoses, knobs, lamps, levers, shafting, lubricants, manifolds, sheet metals, metric retaining rings, nuts, panels, pins, pipes, angle plates, pulleys, carbide punches, rust removers, retainers, rollers, screws, shims, ejector sleeves, splines, springs, needle valves and sealing washers, and more. Materials include 1045 carbon steel, 304, 440C and 420 stainless steel, 2017 aluminum alloy, polyacetal, 4137 alloy steel, C3604 brass and nylon.

We are an industrial distributor specializing in the manufacturing marketplace for precision parts, medical devices and aerospace supply chain. We have a full supply chain of safety related products and have masks, gloves and sanitizer on order with access to much more in response to the COVID-19 pandemic. Available supply in surgical masks, respirators (e.g. N95), gloves (all sizes), Rapid PCR test kits, protective suits and logistics. 1 - 3 weeks lead time.

www.MFSupply.com/Default.asp

In response to the COVID-19 crisis,we can manufacture solutions to cover, seal and protect medical equipment. We have been designing and manufacturing sealing solutions, boots and fasteners for more than 70 years. Our products are widely used in the medical, military, marine, food and beverage, energy, agriculture and industrial industries. Our products are resistant to most chemicals and hazardous substances, making them an ideal choice for products or systems that require frequent sanitizing or wash down procedures. Medical equipment is vulnerable to all types of contaminants. Lead times are 1-3 weeks.

apmhexseal.com/

Custom manufacturer of cable assemblies and wire harnesses. Products include printed circuit board or cable assemblies, wire harnesses and thermal management units. Prototyping, engineering support and vendor managed inventory (VIM) services are offered. Serves the aerospace, military, transportation, broadcast, agricultural, telecommunications, medical, oil and gas industries. Capable of Kanban manufacturing. JIT delivery. RoHS compliant. ITAR registered. UL listed.

www.carrmfg.com/